Piero De Luca, from the Mad Fabricators Society came in to film a video biography for Baileigh industrial on me, the shop, and some the equipment i use.
I’d invite you over. I’ve only met you the one time I stopped by your shop to buy a couple old Ford 9’’ rear ends. You were super nice and helpful with any questions I had. You seem like a stand up guy. I’ve been following you and your shop on social media for years. It’s pretty cool to know there is a shop like yours not far from me here in Ohio.
I believe that I first found you whilst drooling over Baileigh catalogs many moons ago - you deserve all the exposure that they have given you over the years based on this video. Seems a shame that you don't have an apprentice chomping at the bit to learn all they can from someone with such obvious talent.
I've rebuild a couple old toyotas and a 69 international Scout. I did it all with a 5" bench vice a couple hand dollys. I'm bragging now, but three vehicles and I didn't even use a gallon of Tiger Hair or a gallon of Rage. I would love to have Mike as a neighbor, but I don't think he wouldn't enjoy it much :-)
You said there’s only so much that you can do in a day? Why don’t you try taking on an apprentice, where they don’t get much wages but they get to learn whatever you know, plus they can get time off for college.
easier said than done man. i am not opposed to the idea but i have not found anyone who actually wants to do the work. The ones that do usually own their own shops
Very inspiring vid ! I did not have your luck with Baileigh - I had one of the first MH-19’s and they could never make it work - just problem after problem. I went to the factory and tried the big one, I met Chris Rush up there, he was also inspiring so I was going to order it. But I got so put off by the Baileigh neglect of my MH19 that I gave up. We are mostly a boat shop - I think that was maybe during a time where if you weren’t building rat rods Bailey didn’t care about you in the least. I still have the 19 and am just getting ready to buy another big hammer, it’s a big investment for a small shop - Could I stop by for a quick chat and see yours before I rule out the Big Baileigh ? Thanks Check us out if you have a feee min - Jean Street Shipyard
I have really wanted to see "exactly" how those 2×4 rails are bent... thank you!! Love your show , but,, you are living "MY" dream...you sort of give me hope...
Great informative video Mike giving a little backround of how it all began with a mix of great cars along with the machines that help make them. I love what you are doing there keep doing the same. Love the car in the start of video can you tell me what it is ? As I'm in the UK happy new year to you MIke
@@cornfieldcustoms Does that have a flathead/sidevalve ford engine? I had a series 4 dune buggy back in the 80s but sold it and bought a friend's Europa JPS. Sold that and went back to Porsches and have 2 air-cooled 911s and a 914. However, I missed a great deal on a Lotus 6 in Anacortes WA about 17 years ago and still regret not buying it.
I understand that you can mandrel bend steel but other than car frames, I can not think of other products. You must have tons of tooling because I know how many sizes there are of tube and pipe.
That last statement is so true. when I was a teenager and getting into metal shaping and sharing my work mike was always shooting me down. But when I see his face on a thumbnail I know we are going to see some nicely made stuff. Keep going.
Thanks for the replies. As far as shooting you down i feel it was more realistic feedback towards business and how to present yourself, from learning the hard way myself. The one that comes to mind was the disputes between you and your neighbor that was being posted publicly on FB and how it was not very professional looking for a business to be doing that.
well lets hope no one ever moves in next door to you that tries to run you out of town and starts digging a big parking lot in the back and telling people that the intention of the digging was to make my building collapse.. you can victim shame all you want but lets just hope you never get in that situation. You shot me down a lot more then just that, remember the sweeps I made that matched my power hammer dies. years later suddenly those little guides are cool but when I made it as a little set of 6" sweeps you really shot me down. also the dual piece edge rolling die, my machined model-A flush door handles, oh and when I bought a cnc to make better dies. I left all the metal shaping groups because of your trolling. I now take any teenager or young adult that is interested in this and I let them have full access to any powerhammer or wheel I have. I teach them to tig weld and I set aside time to let them run some machines. I took your actions and made something positive out of it.
@@cornfieldcustoms I dont feel slighted. Hell I watched this video and cheered you on with how far you have come. that last sentence made me smile so big.
I especially love fabricating metal; I built a 1' lift for my 1968 International Scout to put big 38" tires on it. I was 15 when I bought it for 800$ and started immediately cutting into it, with the help of my father's 220 buzz box. I remember having to buy one tire and wheel at a time, shit I was fifteen! by the time I got my driver's license, it was ready to drive to school! Needless to say, being the tallest thing in the parking lot, it got a lot of attention. God damn I remember being so proud. I also remember a random girl stopping me between classes to say she and her mom had seen somewhere downtown and her mother told her to never to get in that thing. LOL! I love what you do!!
I don’t believe I’ve ever seen anyone work a piece of sheet metal as you do. They are fighting it, whereas you romance the hell out of it. Great job! Steve
Love that modified roadster and that streamliner my God that is one hell of a sexy car. Just happened to run across your channel and I just cannot believe the level of cool in your shop wow just blown away.
very cool Mike. you deserve and have earned this. I follow everything you do, you always blow me away. 👏
I’d invite you over. I’ve only met you the one time I stopped by your shop to buy a couple old Ford 9’’ rear ends. You were super nice and helpful with any questions I had. You seem like a stand up guy. I’ve been following you and your shop on social media for years. It’s pretty cool to know there is a shop like yours not far from me here in Ohio.
Thanks for sharing!
nice shop, thanks for sharing
Really great overview of the shop with your biography included! Well done!
Yes you do. Really cool sh1t. 100% craftman.
Nice video Mike.
Yep - he builds some cool shit 👍👍😎👍👍
Awesome video! Great look at the shop and machines. Always excellent to see what you are up to
I believe that I first found you whilst drooling over Baileigh catalogs many moons ago - you deserve all the exposure that they have given you over the years based on this video. Seems a shame that you don't have an apprentice chomping at the bit to learn all they can from someone with such obvious talent.
Nice shop dude! Great looking work too!
I've rebuild a couple old toyotas and a 69 international Scout. I did it all with a 5" bench vice a couple hand dollys. I'm bragging now, but three vehicles and I didn't even use a gallon of Tiger Hair or a gallon of Rage. I would love to have Mike as a neighbor, but I don't think he wouldn't enjoy it much :-)
I just found your channel from a tube bending vid. I just subscribed for your definiteness and clarity of purpose. 👍
thanks for watching and subbing
Great tour!! Thanks!
You said there’s only so much that you can do in a day?
Why don’t you try taking on an apprentice, where they don’t get much wages but they get to learn whatever you know, plus they can get time off for college.
easier said than done man. i am not opposed to the idea but i have not found anyone who actually wants to do the work. The ones that do usually own their own shops
@@cornfieldcustoms I know a few lads over here in the UK that would jump at the chance….
@@Fumingzeus its totally different over here.
Great video, Great story 😎
Yeah, you build some cool shit! I'm glad to know you, Mike, you've come a long way since I met you. Keep on!
Great video. You are the one to follow
Well that was gr8 thanks, and that mustang with a boss 429 wow, you are and will always will be one of the greats.
Great Shop Tour.
#STAYSAFE
#PHILLYPHILLY 🇺🇸
#FLY EAGLES FLY 🦅
MERRY CHRISTMAS
HAPPY HANUKKAH
HAPPY NEW YEARS 2023
thank you
That's rad !
Very inspiring vid !
I did not have your luck with Baileigh - I had one of the first MH-19’s and they could never make it work - just problem after problem. I went to the factory and tried the big one, I met Chris Rush up there, he was also inspiring so I was going to order it. But I got so put off by the Baileigh neglect of my MH19 that I gave up. We are mostly a boat shop - I think that was maybe during a time where if you weren’t building rat rods Bailey didn’t care about you in the least.
I still have the 19 and am just getting ready to buy another big hammer, it’s a big investment for a small shop - Could I stop by for a quick chat and see yours before I rule out the Big Baileigh ?
Thanks
Check us out if you have a feee min - Jean Street Shipyard
yea call the shop line and we can set up a time for you to come by 513-575-4322
Very nice ...kind of like a metal candy store...Happy New Year
Happy new year!
How the hell can you have done all that by yourself ?! Presumably you are'nt spending your evenings scrolling thru utube and facebook. FKN amazing
It just takes a lot of work and effort, and years of both
great work i have watched a number of videos very educational great job enjoy watching !!
Thanks for watching
Always wondered how they did 2x4 frames without heating them up and all that other stuff now I know that is pretty awesome
thanks for watching
I have really wanted to see "exactly" how those 2×4 rails are bent... thank you!!
Love your show , but,, you are living "MY" dream...you sort of give me hope...
thanks for watching man. Get out there and chase those dreams
Great informative video Mike giving a little backround of how it all began with a mix of great cars along with the machines that help make them. I love what you are doing there keep doing the same. Love the car in the start of video can you tell me what it is ? As I'm in the UK happy new year to you MIke
The station wagon? Its a 1960 ford country sedan. Thanks for watching
very impressive shop and equally impressive skills. are you doing all that work alone or do u have some help?
this is my first time on your channel
I work alone, other than having a couple buddies help me out from time to time if i need a hand. I dont have any employees or anything
I wish you were my neighbor. I would quit my job
its funny because not many people come by the shop. could be the doors are locked most of the time lol
You are the Gold Standard young man !
Live your dream .
thanks
Too many projects for just one guy.
not really, i am doing just fine
Just found your channel. Very cool. Is that a LoCost Seven in the background?
no it is an original 1958 Lotus 7 series 1
@@cornfieldcustoms Does that have a flathead/sidevalve ford engine? I had a series 4 dune buggy back in the 80s but sold it and bought a friend's Europa JPS. Sold that and went back to Porsches and have 2 air-cooled 911s and a 914. However, I missed a great deal on a Lotus 6 in Anacortes WA about 17 years ago and still regret not buying it.
I understand that you can mandrel bend steel but other than car frames, I can not think of other products. You must have tons of tooling because I know how many sizes there are of tube and pipe.
i do mostly car frames, but have done some architectural bending and art stuff for people. i only bend 2X4 though in rectangle
@@cornfieldcustoms It is good to see quality workmanship and skilled explaining. Thank you.
That last statement is so true. when I was a teenager and getting into metal shaping and sharing my work mike was always shooting me down. But when I see his face on a thumbnail I know we are going to see some nicely made stuff. Keep going.
Thanks for the replies. As far as shooting you down i feel it was more realistic feedback towards business and how to present yourself, from learning the hard way myself. The one that comes to mind was the disputes between you and your neighbor that was being posted publicly on FB and how it was not very professional looking for a business to be doing that.
well lets hope no one ever moves in next door to you that tries to run you out of town and starts digging a big parking lot in the back and telling people that the intention of the digging was to make my building collapse.. you can victim shame all you want but lets just hope you never get in that situation.
You shot me down a lot more then just that, remember the sweeps I made that matched my power hammer dies. years later suddenly those little guides are cool but when I made it as a little set of 6" sweeps you really shot me down. also the dual piece edge rolling die, my machined model-A flush door handles, oh and when I bought a cnc to make better dies. I left all the metal shaping groups because of your trolling.
I now take any teenager or young adult that is interested in this and I let them have full access to any powerhammer or wheel I have. I teach them to tig weld and I set aside time to let them run some machines. I took your actions and made something positive out of it.
@@hyperformancellc sorry you felt slighted
@@cornfieldcustoms I dont feel slighted. Hell I watched this video and cheered you on with how far you have come. that last sentence made me smile so big.
You're ok I guess 😘
Congratulations for your job,amazing and very rare can see a men with your devotion
Thank you 🙏🏻
Just found your channel this evening, you sir, are amazing!
Welcome aboard!
Chevrolet, not "chevy".
thanks for your input
Wow!!! Glad to find someone that actually puts quality first. Keep up the videos
thanks for watching
I especially love fabricating metal; I built a 1' lift for my 1968 International Scout to put big 38" tires on it. I was 15 when I bought it for 800$ and started immediately cutting into it, with the help of my father's 220 buzz box. I remember having to buy one tire and wheel at a time, shit I was fifteen! by the time I got my driver's license, it was ready to drive to school! Needless to say, being the tallest thing in the parking lot, it got a lot of attention. God damn I remember being so proud. I also remember a random girl stopping me between classes to say she and her mom had seen somewhere downtown and her mother told her to never to get in that thing. LOL! I love what you do!!
I don’t believe I’ve ever seen anyone work a piece of sheet metal as you do. They are fighting it, whereas you romance the hell out of it. Great job! Steve
Thanks
Love that modified roadster and that streamliner my God that is one hell of a sexy car.
Just happened to run across your channel and I just cannot believe the level of cool in your shop wow just blown away.
thanks for checking it out
If I had a shop like that in that location....I wouldn't wanna leave either....fukn minty...💪😎🍺🇳🇿