Thanks for this. It gave me the courage to remove the front seat and just swivel it …. definitely and re screw it. I kept one rear seat 💺 and now I have a lounge 😊. 💜🙏😎
Ok, today I did the same as shown and was able to avoid appearing problems with raising the seat with 20mm high aluminium bars. What can I say, it works very well! Thanks alot to this sympatic creative dude! Greatings and lot thanks from Frankfurt!
Game changer for sure. Good job! I had a car with a front passenger seat cushion that could flip forward to allow access to storage space in that seat.
Well done for the cool modification Omar. i wanted to do the same in my mk1 Multispace but didn't think it was possible because of the tight space especially with the centre console. My car even with the rear seats removed still isn't a camper more of an open multipurpose vehicle i use for biking and camping in and out of so i think of it more as a tent on wheels. As an experiment in versatility i bought a van seat from a breakers which unlike the car has the ability to fold flat then tip forward revealing a spacious seat base area. As the seat is non sliding i don't know if i can attach a swivel but I'll have a look as i have an FASP from a T4. What i can do when parked up though is whip out the seat base bolts with a cordless drill in 60 secs and spin the seat around to sit on wooden spacer blocks which does transform the space. i sold my midsized campervan and now love the simplicity of a multifunctional small vehicle.
Great video!👌 It´s nice to see that seat can be turned even in small VAN.💥 I have a question - does it work same in new Doblo (2010-2022)? Has anyone tried it? 💬❓❔❓❔
Ohh this is epic, well done! I didn't think it was possible with the seats being so low, our Dobby is set out differently so it doesn't make much sense for us now but I wish I'd seen this during the planning stages as I might have built our differently 😂 I'm currently planning on installing a split charg kit, can you tell me how you routed the cable from the engine bay? 🌱💪
Thanks! On doblos with air conditioning, there is a rubber bung in the passenger side of the firewall where the moisture drips out of. That's where we ran the cable through.👍🏼
According to the Polish proverb: "A small thing, but it brings joy" By the way, could you provide the part number of the reason, because you won't make a big business out of it anyway.
Doesn't this create a complication when trying to insure the car? I mean a passenger seat is quite important for obvious safety reasons and you have modified it in your garage. They always ask , "have you made any modifications to your vehicle".
A swivel in a Doblo at last!!!!! Thank you thank you!!! You’re brilliant 🤩🤩🤩
Thanks for this. It gave me the courage to remove the front seat and just swivel it …. definitely and re screw it. I kept one rear seat 💺 and now I have a lounge 😊. 💜🙏😎
Ok, today I did the same as shown and was able to avoid appearing problems with raising the seat with 20mm high aluminium bars. What can I say, it works very well! Thanks alot to this sympatic creative dude! Greatings and lot thanks from Frankfurt!
Maybe consider a stronger metal, aluminium can bend quite easily!
Cracking idea Brother, great job fitting it and documenting too. Enjoy swivelling 😉
Dziękuję,że dajesz nam tak dobry pomysł.😄🙋
Nice build! Thanks for the idea!
Perfectly done
Game changer for sure. Good job! I had a car with a front passenger seat cushion that could flip forward to allow access to storage space in that seat.
Awesome! Thank you fo such a detailed manual and all the info. 👍 All the best!
Yep, I did it about the same way about a year ago. Really changes the space 🙂
Well done for the cool modification Omar.
i wanted to do the same in my mk1 Multispace but didn't think it was possible because of the tight space especially with the centre console.
My car even with the rear seats removed still isn't a camper more of an open multipurpose vehicle i use for biking and camping in and out of so i think of it more as a tent on wheels.
As an experiment in versatility i bought a van seat from a breakers which unlike the car has the ability to fold flat then tip forward revealing a spacious seat base area.
As the seat is non sliding i don't know if i can attach a swivel but I'll have a look as i have an FASP from a T4.
What i can do when parked up though is whip out the seat base bolts with a cordless drill in 60 secs and spin the seat around to sit on wooden spacer blocks which does transform the space.
i sold my midsized campervan and now love the simplicity of a multifunctional small vehicle.
That's wicked.❤
The lifting handle to slide the seat back and forth...
...I just took ours off and fitted it upside down!
No clearance problems.
Good to know 👍🏼
Now Justyna has the entire bench space to cook AND wash dishes. :)
Thanks for sharing bro...
This is beautiful
Epic Video..well done Mate..🤙
Hello, good work👍Useful video, thank you 👌Regards and respect Martin.
This was so interesting Omar. Thank you for taking us through the process. Happy Vanning to you both, Neil from Aberdeen, Scotland 😁
You could buy a turntable and job done ;)
You can attach a table to the table in front of you and using as extension to edit your video ;)
Not really sure what you mean, we did buy a 'turntable'. And yeah thinking about some small table
Awesome! Thanks!
Well done mate. Great video.
Great video!👌 It´s nice to see that seat can be turned even in small VAN.💥 I have a question - does it work same in new Doblo (2010-2022)? Has anyone tried it? 💬❓❔❓❔
Not sure about the new Doblo
Ficou muito bom. Parabéns. 🎉
very nice!
Hi guys!!! they are geniuses, one question, why did they change the name of the channel? Grettings from Argentina!!!
Hi, we wanted to change it, so we did 😁 We are a team and our surname is Ateem 🤟🏼
Where did you buy the swivel base please?
Ohh this is epic, well done! I didn't think it was possible with the seats being so low, our Dobby is set out differently so it doesn't make much sense for us now but I wish I'd seen this during the planning stages as I might have built our differently 😂
I'm currently planning on installing a split charg kit, can you tell me how you routed the cable from the engine bay?
🌱💪
Thanks! On doblos with air conditioning, there is a rubber bung in the passenger side of the firewall where the moisture drips out of. That's where we ran the cable through.👍🏼
@@TeamAteem Great thank you, I'll see if I can find it, ours has A/C 😊
Can you post a link for the base as I'm looking to do this
Did you watch the video?
When are you back on the road??)))))))
Soon, we want to see Poland 🙂
@@TeamAteem Great!!! So do I. .😄😄😄
Por que vocês mudaram o nome do canal?
Because we wanted to 🙂
According to the Polish proverb: "A small thing, but it brings joy" By the way, could you provide the part number of the reason, because you won't make a big
business out of it anyway.
Oh wait... did the channel name change?
Yep!
Don't do the drivers seat. And you do have an awesome van. I just need you to squirm around and say "that's not going no where"
Doesn't this create a complication when trying to insure the car? I mean a passenger seat is quite important for obvious safety reasons and you have modified it in your garage. They always ask , "have you made any modifications to your vehicle".
The swivel base is crash tested & EU approved. Yes modified but to a good standard which would easily pass an MOT.
Are you German?
Anybody know if this would work on a 2018 Ram Promaster City?
People have done it, don't know specifics but it's possible
Another brilliant video guys 👍👍❤️ @bettyourcampervan xx