Ive had my RK25 for just a year now with 86 hours on it no issues so far and i love it , Use it mainly to pull a 6ft box scrapper on my 3 acre gravel parking lot pretty easy work . Your right that lever is a bit unhandy under the seat i do the same thing but getting used to it , No complaints and great vid HDI i subd as well !
Got one a year ago...love it. Have a grapple as well...love it. But on the backhoe I kept forgetting to remove the pins. Snapped off that top one couple times...my fault. So I put a chain with a clip on them and clip it to my levers so in order to use, I have to pull the pins. Works every time. Yep that lever under seat needs a saw took to it...other than that it great fun to operate and a pleasure to see what you have done when the job is completed. Oh and don't loan out or your repair bill might be big when they put gas in the diesel tank. LOL
Hey David- the fuel thing… lockable fuel transfer tank bolted to truck or pallet. RK sells manual operated lever pumps that are rebuildable and half the cost of electric. They operate / pump both pull and push, and will do 1/4 or 1/2 gallon per stroke. You’ll also need enuf 2” piping for a 7’ riser- combination of galvanized and pvc. That riser allows fuel vapor to vent away from ground level people and keeps you in compliance with regulations. I put a U at the top of the riser to keep rain out, and added screen held by band clamp to keep birds bugs and sticks out. No electricity required. When fueling, turn tractor key to accessory / run without starting it, and you can pump at your leisure while watching the fuel guage rise. Wayyyyy less aggrevating than 5gal jug fueling. If truck mount, easy to drive to get more fuel. If pallet mount, fairly easy to move as needed with pallet fork. Don’t forget to ground the tank either way. I grounded to mounting bolts with about a foot of wire, to a sharpened piece of rebar that i can push into the ground wherever i drop it. Hope that helps bud. If ya go the pallet route, set it on top of a 2nd pallet so your tank mounted pallet doesn’t ground rot.
Side note- i think RK also sells a rotary manuel fuel transfer pump. And you could probably attach a hose to the end of that. Have never used one of those, but would imagine you might have fuel left in the hose when done filling and would have to find a way to deal with that… probably with a cup. I went the lever pump route because it came with a nice long hose and a place to stow it vertically while protecting the nozzle from rain.
I am looking at the compact tractors, and the RK25 seems to be the best bang for your buck, for a few acres of homestead. Congrats to you, too, on leaving the city and gaining some elbow-room and privacy, out in the country. Your camera and sound are OUTSTANDING, for a new UA-camr. Most new channel postings from others either are done with a GoPro, or a cellphone, and the audio is hard to hear, and the video is poor. You got it right. I'm now a Subscriber, as you use plain language we all can understand, and not a lot of technical stuff we can't use. Gonna watch for all the projects you post on here, including the RK 25 stuff. (I see a grapple in your future). LOL. BTW;; I'm up in NE Ohio.
Thanks for taking the time to share your thoughts. I pray that you find the best deal in your area if you go the RK route and that God blesses you so you can get every attachment you desire. God bless you sir! Grapple sounds awesome too 😉
Oh geeze bud. Hope ur doin ok with that train mess up there. I agree with ya on the best bang for your buck. You can sweeten the deal… apply for the harvest card. You can get cash back on purchases. Put the tractor on layaway and max out the card, wait 2 days and then call and pay it off in full. Wait 4 days, and then go back to RK and repeat- until it’s paid off. You should get enuf cash back to pay for an implement or two. Do the same with the implement purchases. That cash back adds up. Got this idea from another youtube channel, and it worked like a charm.
I have had my tractor 8 months and I love it 6 feet for the backhoe is pushing it unless you're right on top its easy to run chain to keep outriggers from drifting when pulling and lifting with the front loader I welded two hooks on the top lip they work great I bought them on Amazon
thats awesome man glad you love it. Yeah I heard something about f you weld or modify the tractor in any way... it voids the warranty? Have you heard that also? I thought about adding hooks also.
@@davidadowlen the whole point of getting a tractor is to set it up your way if it became an issue it would only void the loader warranty I can deal with that approximately 6 inches from each side of the loafer bucket is where I welded them right next to the reinforcement
Great practical video. Thank you for taking the time. I too am a city boy and just bought 10 acres. I noticed the RK tractors are reasonable for the money. Looking to find a good used one. Thanks again for an informative video.
I use a clear hose to fill the tank. Set the container on the fender against the seat and siphon fill. Always color code your fuel containers. Diesel yellow, red gasoline. I also welded hooks on the strong structure on the top of the bucket for strap and chain pulling. Enjoy your machine makes work much easier.
Hay grate vido. I have had my RK25 FOR 6 MONTHS .AND IT IS A GREAT TROCTOR AND I HAVE REALLY ENJOYED DOING many projects, on ranch/farm using for barn and area It has been great . I agree fule tank is a little challenging to me But I would never give up my Rk25 .
Great video and review! Those look like nice machines! I have a Deere 1025R and love it. One thing, if you haven't done it recently, you might put some grease in those front-end loader pivot points (grease zirks). It sounded a little squeaky when you were dumping and curling the bucket.
Hey, I have a farm as well, born and raised on it, with 5 tractors. Here is my response to your breaks. The bucket by itself can do the same as the locking break. You will automatically pick it up always before moving. Barry
Good video dude. Couple of tips. Bolt on hooks on top of bucket (amazon). You can just drill through the top rail to install or weld them on. Cut off some of the hydraulic handle under the seat ( I am doing this soon) and put the cap back on the shorter rod. I also added a LED light bar for night work and a nasty tooth bar on my bucket which makes the bucket far more useful. Great little unit. I have the backhoe as well as a few other attachments and so far so good.
I love weld on hooks great when using a chain but I prefer them on the outside ends of my brushguard and a pair of drings on the top for straps. Of course I don't know where you can buy the guard. I made mine from a pice of trailer frame. Put a 2" recover low in the center and cut some holes where the headlights could shine with enough slits that I can see what's going on in the ducket.keep the slits you cut out to run vertical behind the slits and light holes to give it extra strength.
Oh forgot to tell don't leave it a rectangle cut a triangle out of the flat part on each end so you can fold the top bar dow and weld the to the bottom rail. Makes it look store bought. The bottom rail needs to be long enough to cover your quick attach and the top has to be just a little longer so it will reach. Like a rafter on a house it will depend on the metal you make it from.
I have the RK24 LOVE IT ! Had some brush wrap around the PTO shaft and make the mower deck and trans case seals leak. Took almost 3 months to get the deck seal, STILL waiting for the trans PTO shaft seal at 4 months !
I'm in Norther Kentucky and thinking about either a Kioti or a RK. I always just lock one side of the brake because it's easier to lock it and you will know right away when you take off because it will pull to one side. I forget all the time. Nice review.
Yeah the buckets on the rk tractors are almost likw mower decks on the Husqvarna zero turn mowers. My rk 19 teactor i had pallet forks on it and moving a couple pallets that were stacked it was like 8 to 12 skids stacked on top of each other and it bent my bucket. I had it fixed but it wasnt the best way to fix it tho. And it wasnt perfect but it works
Make sure you don't put gasoline in your diesel. One of those battery operated fuel pumps on Amazon helps with fueling. The hydraulic remote lever can be shortened if you feel brave enough to cut it.
Enjoyed your review. Maybe make a 90 degree upward bend in the lever 2 inches back from the end. Try using a large funnel when pouring the fuel if you haven't already.
It seems to me a fair an honest video. Just a hint from an engineer point of view, every machine has capabilities and limitations. Most of the time if you are patient and don't force the equipment you can do more work than it is supposed to handle without damaging the equipment, but usually it will take longer. BTW, breaking things are part of the learning process
@@davidadowlen here is a link to the pipe clamps on a video you would likely need 3 of them to clamp from the bent edge to the top of the bucket. Also try wraping some ratchet straps 2 inch wide ones around the bucket along with the pipe clamps. ua-cam.com/video/hY7Btm_fHKM/v-deo.html
Thanks for the idea there. I bent mine the same way pushing a lil bit too hard on a pair of stubborn ground level stumps. Balancing the weight of the tractor on the bucket on top of a firewood round didn’t seem to do the job. Had thought maybe dropping the bucket face down and pushing with backhoe bucket might push’r back but havent tried that yet. Will have to check the video here.
Take a grinder and cut 3 inches off that I draw it switch. That's probably what I'll do to mind. If it gets in my way but I just got mine a few days ago. So don't know if it will be in my way
I haven’t chopped mine yet, but i have started checking it every time i get on or off. You can generally hear a difference tween engaged or not, but still…
Been using the rk25 for about 70 hrs now , it is a powerful machine , I love it , I always look for pros and cons and don’t see many but I do have some things I’m not happy with , first off , it needs a step , it is hard to get on and off mainly when you use the backhoe because the reach is not far so you have to keep moving the machine witch brings me to my second problem…the backhoe bolts that hold it to the backhoe frame are constantly coming loose I think the two parts of the backhoe frame and backhoe mount should be welded. Other than that I do love the machine and the loader has no issues so far and lifts anything I need to….I do wish I had a grapple though
Nice video. I only have an acre so this guy would be overkill. I'd love to have one anyway help out the neighbors with their gardens and landscape my place.
They do make one a size smaller but man I’m telling you it has saved me thousands. Quick story … I literally had it about a week when I had a underground water connection break. I was able to dig down the two feet with the back hoe and repaired it myself. Can you imagine me having to pay someone to do that? I think I spent 20$ in materials
Hello there. I actually have an RK24 which I love. The RK25 was being introduced at the time I was choosing between subcompact tractors. Based on your video and property size and stuff you seem to be moving all over the place, maybe an RK37 might have been better for you? I understand - moot point now. Anyway, hope you enjoy using your tractor!
Considering this machine with the belly mower for our property in Vinton county Ohio, how do you like it on hill country? I have a Kubota L47 TLB also, a smaller machine would be nice but really need a mower Btw, the battery powered pumps are awesome for fuel transfer!
Personally I don’t have much info about the mower deck for it as I opted for the back hoe instead. I also think it would be a tad to slow for me as my grass cutting takes me 7 hours. I like speed with my cutting and it seems a tractor would be too big and cumbersome. As far as hills I think it’s fine even with the weight of the back hoe on it. I will look into the pump also thanks
I have the backhoe too. One thing about mine the swing left and right goes to max point and will not swing back without bumping back and forth. Is there a way to adjust it to reduce the max swing? On the brake issue…all they need to do is put a light in the instrument panel showing the brakes are on! I have the same problem!
Appreciate your comment. No I am not aware of a way to adjust that swing. Mine doesn’t do that. If you take it in for your first service I’d have them check it
My local RK had a heck of a time getting a 3rd function valve. Paid and waited 7 long months. That’s a long time to me, so i called 2 different TYM dealers and asked about 3rd function valves for their TYM T25 tractor (same tractor really). In both cases, once they knew i planned to put it on an RK25 the TYM guys never called back. Not a great way to treat a potential new customer. I got my money back from RK after that 7 months. Had custom hydro lines made up by a john deere dealer to run to rear remotes. That cost about the same as the 3rd function valve, and operated flawless with that underseat lever. The drawback is that you can’t have the backhoe attached while using the grapple or a hydro snow plow that way, because the backhoe is stupid heavy and you would have to unplug it from the rear remotes and let it dangle. I expect that would pressurize those backhoe hydro hoses so much you would never be able to reconnect them. About 6 months later i called RK back, and they got the 3rd function valve for me in 2 days. Have not installed it yet, but i plan to real soon, and will leave my custom workaround in place so that i have redundant options up front. I almost like the idea of being able to leave that underseat lever in a “close the grapple” position if i was ever gonna do something foolish with it. As in “grabby grabby” rather than “holdy holdy”. Ya know… in case you have to fight a pack of zombie coyotes with yer tractor…
I was at Rural King couple days ago looking at these RK tractors, I was wanting to see this RK25 version but all they had were RK24 and 5-6 RK37 on the lot. I am wondering if this RK25 is about the size of the RK24 or is it larger, is it about the size of the RK37 or little smaller..
@@jesseskaggs9480 paying it off is based on how the financing is set up and how much you put down and or pay extra on it. I really can’t answer that one. The loader works just fine but it is a bit different than a skid steer as a skid steer can do much more movement wise
@@davidadowlen I’ve already got a tractor that I bought in September of 21. I enjoy watching other tractor owners videos and reviews of their machines.
@@sufficientgraceministries I’ve got a kubota dealer about 3 miles from my house here in Georgia so I went with a kubota l4060 they have been good to deal with I did not get a backhoe wish now I would have.
We need to talk. I have 50 years experience with equipment. Riding my second rk 25. Can help you with a lot of problems you haven't had yet. Let me know if I can help
@@davidadowlen LOL I was asking the guy with 50 years experience. I took my backhoe off to use the box blade and now the tractor wants to bog down under a normally easy load.
After 2 years owning it, DON'T BUY this tractor.... Get a different brand that has REAL sorta-LOCAL support and Parts... If you live far from rural king that sells tractors, simply forget about this tractor exists
Thanks Mark for your comment and opinion. I love mine however there is some truth in what you're saying about living close to Rural King. Be blessed my brotha!
I think this compact tractor is great for our family thus far. amzn.to/3regxU9
Ive had my RK25 for just a year now with 86 hours on it no issues so far and i love it , Use it mainly to pull a 6ft box scrapper on my 3 acre gravel parking lot pretty easy work . Your right that lever is a bit unhandy under the seat i do the same thing but getting used to it , No complaints and great vid HDI i subd as well !
Thanks Kelly I appreciate your words. I love mine too. So nice to have and have come in very handy.
Got one a year ago...love it. Have a grapple as well...love it. But on the backhoe I kept forgetting to remove the pins. Snapped off that top one couple times...my fault. So I put a chain with a clip on them and clip it to my levers so in order to use, I have to pull the pins. Works every time. Yep that lever under seat needs a saw took to it...other than that it great fun to operate and a pleasure to see what you have done when the job is completed. Oh and don't loan out or your repair bill might be big when they put gas in the diesel tank. LOL
True. I did let a buddy borrow it but I trust him with it. I snapped off a pin early on myself lol
If you could just have two add on items for the tractor, which would you choose? Thanks man. Like your content.
Had our RK25 almost 2 years, no troubles. Enjoyed your video.
Thank you sir. Yes I love mine as welln
Hey David- the fuel thing… lockable fuel transfer tank bolted to truck or pallet. RK sells manual operated lever pumps that are rebuildable and half the cost of electric. They operate / pump both pull and push, and will do 1/4 or 1/2 gallon per stroke. You’ll also need enuf 2” piping for a 7’ riser- combination of galvanized and pvc. That riser allows fuel vapor to vent away from ground level people and keeps you in compliance with regulations. I put a U at the top of the riser to keep rain out, and added screen held by band clamp to keep birds bugs and sticks out. No electricity required. When fueling, turn tractor key to accessory / run without starting it, and you can pump at your leisure while watching the fuel guage rise. Wayyyyy less aggrevating than 5gal jug fueling. If truck mount, easy to drive to get more fuel. If pallet mount, fairly easy to move as needed with pallet fork. Don’t forget to ground the tank either way. I grounded to mounting bolts with about a foot of wire, to a sharpened piece of rebar that i can push into the ground wherever i drop it. Hope that helps bud. If ya go the pallet route, set it on top of a 2nd pallet so your tank mounted pallet doesn’t ground rot.
Side note- i think RK also sells a rotary manuel fuel transfer pump. And you could probably attach a hose to the end of that. Have never used one of those, but would imagine you might have fuel left in the hose when done filling and would have to find a way to deal with that… probably with a cup. I went the lever pump route because it came with a nice long hose and a place to stow it vertically while protecting the nozzle from rain.
I agree with the brakes and the rear hydro leaver.Otherwise love the tractor.Good video.
Looks like you could cut the hydro lever down a few inches
Yep- on both counts.
I am looking at the compact tractors, and the RK25 seems to be the best bang for your buck, for a few acres of homestead. Congrats to you, too, on leaving the city and gaining some elbow-room and privacy, out in the country. Your camera and sound are OUTSTANDING, for a new UA-camr. Most new channel postings from others either are done with a GoPro, or a cellphone, and the audio is hard to hear, and the video is poor. You got it right. I'm now a Subscriber, as you use plain language we all can understand, and not a lot of technical stuff we can't use. Gonna watch for all the projects you post on here, including the RK 25 stuff. (I see a grapple in your future). LOL. BTW;; I'm up in NE Ohio.
Thanks for taking the time to share your thoughts. I pray that you find the best deal in your area if you go the RK route and that God blesses you so you can get every attachment you desire. God bless you sir! Grapple sounds awesome too 😉
Oh geeze bud. Hope ur doin ok with that train mess up there.
I agree with ya on the best bang for your buck. You can sweeten the deal… apply for the harvest card. You can get cash back on purchases. Put the tractor on layaway and max out the card, wait 2 days and then call and pay it off in full. Wait 4 days, and then go back to RK and repeat- until it’s paid off. You should get enuf cash back to pay for an implement or two. Do the same with the implement purchases. That cash back adds up. Got this idea from another youtube channel, and it worked like a charm.
I have had my tractor 8 months and I love it 6 feet for the backhoe is pushing it unless you're right on top its easy to run chain to keep outriggers from drifting when pulling and lifting with the front loader I welded two hooks on the top lip they work great I bought them on Amazon
thats awesome man glad you love it. Yeah I heard something about f you weld or modify the tractor in any way... it voids the warranty? Have you heard that also? I thought about adding hooks also.
@@davidadowlen the whole point of getting a tractor is to set it up your way if it became an issue it would only void the loader warranty I can deal with that approximately 6 inches from each side of the loafer bucket is where I welded them right next to the reinforcement
@@richardsplker303 No I understand , I feel the same way you do. I was just asking if you had heard that garbage as well thats all.
Those are great tractors, couple little cons but they are good machines, harbor freight sells a diesel pump that makes fueling easy
I definitely need to get one. Wasted a lot of fuel lol
Great practical video. Thank you for taking the time. I too am a city boy and just bought 10 acres. I noticed the RK tractors are reasonable for the money. Looking to find a good used one. Thanks again for an informative video.
I use a clear hose to fill the tank. Set the container on the fender against the seat and siphon fill. Always color code your fuel containers. Diesel yellow, red gasoline. I also welded hooks on the strong structure on the top of the bucket for strap and chain pulling. Enjoy your machine makes work much easier.
That’s a good idea. Thank you for the suggestions
Hay grate vido. I have had my RK25 FOR 6 MONTHS .AND IT IS A GREAT TROCTOR AND I HAVE REALLY ENJOYED DOING many projects, on ranch/farm using for barn and area
It has been great .
I agree fule tank is a little challenging to me
But I would never give up my Rk25 .
Hey! Thanks for your comments. Yes I’m like you and love it as well. Great Tractor
Great video and review! Those look like nice machines! I have a Deere 1025R and love it. One thing, if you haven't done it recently, you might put some grease in those front-end loader pivot points (grease zirks). It sounded a little squeaky when you were dumping and curling the bucket.
Thank you sir and yes I did because I heard it too. Strange because I just did my 50 hour service on it a few weeks before I made the video.
@@maverickfrenzy That noise was the level indicator rod sliding through the eyebolt.
@@projectswithjw thanks and yes I added some lithium to it. 👍🏾
Hey, I have a farm as well, born and raised on it, with 5 tractors. Here is my response to your breaks. The bucket by itself can do the same as the locking break. You will automatically pick it up always before moving. Barry
@@Zimflash1 thx
Good video dude. Couple of tips. Bolt on hooks on top of bucket (amazon). You can just drill through the top rail to install or weld them on. Cut off some of the hydraulic handle under the seat ( I am doing this soon) and put the cap back on the shorter rod. I also added a LED light bar for night work and a nasty tooth bar on my bucket which makes the bucket far more useful. Great little unit. I have the backhoe as well as a few other attachments and so far so good.
Thanks for the info!
I love weld on hooks great when using a chain but I prefer them on the outside ends of my brushguard and a pair of drings on the top for straps. Of course I don't know where you can buy the guard. I made mine from a pice of trailer frame. Put a 2" recover low in the center and cut some holes where the headlights could shine with enough slits that I can see what's going on in the ducket.keep the slits you cut out to run vertical behind the slits and light holes to give it extra strength.
Oh forgot to tell don't leave it a rectangle cut a triangle out of the flat part on each end so you can fold the top bar dow and weld the to the bottom rail. Makes it look store bought. The bottom rail needs to be long enough to cover your quick attach and the top has to be just a little longer so it will reach. Like a rafter on a house it will depend on the metal you make it from.
I have the RK24 LOVE IT ! Had some brush wrap around the PTO shaft and make the mower deck and trans case seals leak. Took almost 3 months to get the deck seal, STILL waiting for the trans PTO shaft seal at 4 months !
Wow. Sorry to hear that dude. That sucks.
Keep working hard. May the Lord bless both of you
thx
I'm in Norther Kentucky and thinking about either a Kioti or a RK. I always just lock one side of the brake because it's easier to lock it and you will know right away when you take off because it will pull to one side. I forget all the time. Nice review.
I might try that. I got so used to both brakes though
Yeah the buckets on the rk tractors are almost likw mower decks on the Husqvarna zero turn mowers. My rk 19 teactor i had pallet forks on it and moving a couple pallets that were stacked it was like 8 to 12 skids stacked on top of each other and it bent my bucket. I had it fixed but it wasnt the best way to fix it tho. And it wasnt perfect but it works
@@ryanandersen287 sometimes that’s all you can do
Make sure you don't put gasoline in your diesel. One of those battery operated fuel pumps on Amazon helps with fueling. The hydraulic remote lever can be shortened if you feel brave enough to cut it.
I appreciate it. I have been doing all I can to learn about this machine and I may just do that. Thanks
@@maverickfrenzy no problem. I picked up my rk 25 yesterday. First thing I'm going to do is deal with the remote lever. I'll put a video up when I do.
@@jdboy9 Cool excited for ya. Great machine.
Enjoyed your review. Maybe make a 90 degree upward bend in the lever 2 inches back from the end. Try using a large funnel when pouring the fuel if you haven't already.
It seems to me a fair an honest video. Just a hint from an engineer point of view, every machine has capabilities and limitations. Most of the time if you are patient and don't force the equipment you can do more work than it is supposed to handle without damaging the equipment, but usually it will take longer. BTW, breaking things are part of the learning process
Thanks for your comment sir
To straighten your bucket , try putting a 4' pipe clamp or two from the blade to the upper back and turn the handles to pull them together as needed.
Thanks Dirk but not exactly sure what you mean. Can you break it down further ?
@@davidadowlen here is a link to the pipe clamps on a video you would likely need 3 of them to clamp from the bent edge to the top of the bucket. Also try wraping some ratchet straps 2 inch wide ones around the bucket along with the pipe clamps. ua-cam.com/video/hY7Btm_fHKM/v-deo.html
Set em up then adjust them one at a time until the bucket straightens, probably will need to go a bit over, so it settle back straight. Good Luck!!
@@OdinX316 appreciate it thanks
Thanks for the idea there. I bent mine the same way pushing a lil bit too hard on a pair of stubborn ground level stumps. Balancing the weight of the tractor on the bucket on top of a firewood round didn’t seem to do the job. Had thought maybe dropping the bucket face down and pushing with backhoe bucket might push’r back but havent tried that yet. Will have to check the video here.
Take a grinder and cut 3 inches off that I draw it switch. That's probably what I'll do to mind. If it gets in my way but I just got mine a few days ago. So don't know if it will be in my way
Sounds like a plan. Let me know how yours goes
I haven’t chopped mine yet, but i have started checking it every time i get on or off. You can generally hear a difference tween engaged or not, but still…
Thanks for the update on your RK25!
You bet!
I suggest bending the hydraulic level up 90 drgrees. At lest it will be out of the way. Great video. Thanks
Thank u sir
I agree about the brake. A warning light would help
Yes or something.
The bucket, take it to a welding shop, and get realignment and add 1/4 brace bar on the bottom welded on.
@@Zimflash1 good idea
Been using the rk25 for about 70 hrs now , it is a powerful machine , I love it , I always look for pros and cons and don’t see many but I do have some things I’m not happy with , first off , it needs a step , it is hard to get on and off mainly when you use the backhoe because the reach is not far so you have to keep moving the machine witch brings me to my second problem…the backhoe bolts that hold it to the backhoe frame are constantly coming loose I think the two parts of the backhoe frame and backhoe mount should be welded. Other than that I do love the machine and the loader has no issues so far and lifts anything I need to….I do wish I had a grapple though
Thanks Gerry. Yeah I agree with you. Grapple would be so cool to have
Great report o. The Rural King tractor.
Glad you enjoyed it
Good video btw, and congrats on yer purchase !
I'd just cut that level back. Thanks for the review!
Nice video. I only have an acre so this guy would be overkill. I'd love to have one anyway help out the neighbors with their gardens and landscape my place.
They do make one a size smaller but man I’m telling you it has saved me thousands. Quick story … I literally had it about a week when I had a underground water connection break. I was able to dig down the two feet with the back hoe and repaired it myself. Can you imagine me having to pay someone to do that? I think I spent 20$ in materials
@@davidadowlen that's great. Moving snow, clearing a little brush and working gardens would be my main use.
@@GONZOFAM7 I hear ya. I used it for snow as well
Hello there. I actually have an RK24 which I love. The RK25 was being introduced at the time I was choosing between subcompact tractors. Based on your video and property size and stuff you seem to be moving all over the place, maybe an RK37 might have been better for you? I understand - moot point now. Anyway, hope you enjoy using your tractor!
Yeah price was a factor as well. I’m just glad we have it ya know ? Thanks
GOOD VIDEO & GOD BLESS!
Thanks Frank God Bless you as well my brotha!😇
Considering this machine with the belly mower for our property in Vinton county Ohio, how do you like it on hill country?
I have a Kubota L47 TLB also, a smaller machine would be nice but really need a mower
Btw, the battery powered pumps are awesome for fuel transfer!
Personally I don’t have much info about the mower deck for it as I opted for the back hoe instead. I also think it would be a tad to slow for me as my grass cutting takes me 7 hours. I like speed with my cutting and it seems a tractor would be too big and cumbersome. As far as hills I think it’s fine even with the weight of the back hoe on it. I will look into the pump also thanks
I have the backhoe too. One thing about mine the swing left and right goes to max point and will not swing back without bumping back and forth. Is there a way to adjust it to reduce the max swing? On the brake issue…all they need to do is put a light in the instrument panel showing the brakes are on! I have the same problem!
Appreciate your comment. No I am not aware of a way to adjust that swing. Mine doesn’t do that. If you take it in for your first service I’d have them check it
I have the same problem with my park brake
I've got 1 of the rk25 and I love ❤️ it. But the rual king store in beckley wv sucks. You would be better off going to tym 2 miles up the road.
My local RK had a heck of a time getting a 3rd function valve. Paid and waited 7 long months. That’s a long time to me, so i called 2 different TYM dealers and asked about 3rd function valves for their TYM T25 tractor (same tractor really). In both cases, once they knew i planned to put it on an RK25 the TYM guys never called back. Not a great way to treat a potential new customer. I got my money back from RK after that 7 months. Had custom hydro lines made up by a john deere dealer to run to rear remotes. That cost about the same as the 3rd function valve, and operated flawless with that underseat lever. The drawback is that you can’t have the backhoe attached while using the grapple or a hydro snow plow that way, because the backhoe is stupid heavy and you would have to unplug it from the rear remotes and let it dangle. I expect that would pressurize those backhoe hydro hoses so much you would never be able to reconnect them. About 6 months later i called RK back, and they got the 3rd function valve for me in 2 days. Have not installed it yet, but i plan to real soon, and will leave my custom workaround in place so that i have redundant options up front. I almost like the idea of being able to leave that underseat lever in a “close the grapple” position if i was ever gonna do something foolish with it. As in “grabby grabby” rather than “holdy holdy”. Ya know… in case you have to fight a pack of zombie coyotes with yer tractor…
Your bucket now has a happy face my bucket has a frown face I bent mine simply by back dragging
Wow back dragging? Crazy.
How do you adjust the parking brake
Here you go- ua-cam.com/video/ichjOZPwE18/v-deo.html
Thanks
Do you know how to check the level of the hydraulic fluid
@ under your seat area is n the back there is a lens where you can see the fluid level
@ thanks
I was at Rural King couple days ago looking at these RK tractors, I was wanting to see this RK25 version but all they had were RK24 and 5-6 RK37 on the lot.
I am wondering if this RK25 is about the size of the RK24 or is it larger, is it about the size of the RK37 or little smaller..
Smaller than the 37 bigger than the 24
@@davidadowlen Ok thanks a lot
Does the loader work regardless of what position the hydraulic lever under the seat is in
Yes
How long does it take to pay it off if I just get it with just the loader only and how worthy are they and will the do what a skid steer can do?
@@jesseskaggs9480 paying it off is based on how the financing is set up and how much you put down and or pay extra on it. I really can’t answer that one. The loader works just fine but it is a bit different than a skid steer as a skid steer can do much more movement wise
Nice tractor
Thank you. Are you cconsidering getting one?
@@davidadowlen I’ve already got a tractor that I bought in September of 21. I enjoy watching other tractor owners videos and reviews of their machines.
@@sizemorec1 ahhh gotcha. What did you get? Lot of choices out there.
@@sufficientgraceministries I’ve got a kubota dealer about 3 miles from my house here in Georgia so I went with a kubota l4060 they have been good to deal with I did not get a backhoe wish now I would have.
@@sizemorec1 I understand. Kubotas are nice machines
The handle under the seat, refab cut some off.
@@Zimflash1 I did
I'd cut the lever down and put the rubber grip back on.
Actually just did. The rubber tip is a different size bit much better shorter now
We need to talk. I have 50 years experience with equipment. Riding my second rk 25. Can help you with a lot of problems you haven't had yet. Let me know if I can help
I definitely will and appreciate the help.
Would you happen to know about the RK 24?
@@JPLawnsMore I know zero about that machine
@@davidadowlen LOL I was asking the guy with 50 years experience. I took my backhoe off to use the box blade and now the tractor wants to bog down under a normally easy load.
@@JPLawnsMore so sorry
Heavy equipment operation requires attention.. here’s a tip for you.. don’t put hands or feet into spinning blades
Wow that was sooo profound
Buy a 12 pump from Harbor Fraight
Please be careful when you lift something tall like your bird house it can very easily tip over backwards onto you
Thank you sir
the hydraulic stick, just cut it down with a hack saw
that front right tire at 10.49 lok like its on backwards fyi (hopefully already resolved) realizing this is an older video :)
@@bowstobourbon yes I ended up doing that. Thanks.
@@davidadowlen awesome!!!!
After 2 years owning it, DON'T BUY this tractor.... Get a different brand that has REAL sorta-LOCAL support and Parts... If you live far from rural king that sells tractors, simply forget about this tractor exists
Thanks Mark for your comment and opinion. I love mine however there is some truth in what you're saying about living close to Rural King. Be blessed my brotha!
You should have bought a bulldozer
Good video thanks
Welcome
Or maybe when you hit the pedal to move it cuts off the brakes 😮
Yeah that would be a great idea 💡
Get a bungy cord and tie it off
Tie off what? The hydraulic lever?