I have the exact same boat... what size are the lids so that I can order them off the site? Which package should i order to get this type of setup for framing and casting decks?
Do you know where I could get new screw caps for mine I have the pro 120 to but my bottom drain is taking water on every time I go out and fish didn’t know what I could do
I'll bet "twice" as much as the boat cost new lol. Right before they were discontinued the Sun Dolphin Pro 120 sold for right around $2000.00 Dollars give or take. Some may have picked theirs up cheaper back in the day or if purchased used of course.
Does yours have the 2 small holes in the original battery compartment? Mine has 2 small holes and water comes in all the time through there and gets the bottom of my battery battery wet. Not sure if that’s normal. It’s too very small holes toward the back of the original battery compartment. Looks like it’s for draining, but for some reason when I stand on the casting deck, water starts coming in through those two holes.
Those wholes are probably from where the battery straps used to be installed .. sounds like you have water inside your hull, you need to get that out and keep it dry or your foam will absorb it .
I have a Pro 120 I love it.
That boat looks incredible ❤️👏👏👏
Thanks, Ken for watching! We agree.
What a sick boat
Thanks, appreciate you watching
I have been looking to do a build like this. Good job. Looks great
Thanks for watching
How much he charge to fix mines up like that because I want this job done with my boat I have a pro 120 as well
I have had a Pro 120 for past twenty years. Stable as a pontoon. I rarely sit down. Wish I could get a brand new one.
Awesome! Thank you guys 👊🏼
Any time!
That EGA is an awesome touch on the SeaDeck. 🤘
100%
My favorite as well 👊🏼
I’m hoping mine will look half as good as this when I’m done!
This is a great build. I have the same boat. I would love epropuldsion 6.0. I have an all electric lake close to me. It would be amazing.
Navy 6 would be great on this if it can handle the weight
Really incredible work.
how can I get hold of you to work with me on my project.
Sick!!! When ya gettin stuff back in stock, like wiring kit and jump seats?!?
Coming soon!
Awesome
I have the exact same boat... what size are the lids so that I can order them off the site? Which package should i order to get this type of setup for framing and casting decks?
Nate from Tiny boat nation has the sizes you message him .
I used a 12' plastic boat it was perfect for one person, replaced with a 14' aluminum flat bottom
what made you replace it? to bring another person?
next whaler 15 50 hp jet
Do you know where I could get new screw caps for mine I have the pro 120 to but my bottom drain is taking water on every time I go out and fish didn’t know what I could do
Need to seal it w 5200 or a sealant, all these plastic boats are notorious for that with the thru hull fittings
Thats not good. I would 5200 and seal it up for good.
Curious how much that build is?
I'll bet "twice" as much as the boat cost new lol. Right before they were discontinued the Sun Dolphin Pro 120 sold for right around $2000.00 Dollars give or take. Some may have picked theirs up cheaper back in the day or if purchased used of course.
How can I buy this boat??
So how did he tackle the stability problem with this boat?
These boats don’t seem to have much of a stability issues since they are so wide
Where can I get those boxes?
TBNation.net
Does yours have the 2 small holes in the original battery compartment? Mine has 2 small holes and water comes in all the time through there and gets the bottom of my battery battery wet. Not sure if that’s normal. It’s too very small holes toward the back of the original battery compartment. Looks like it’s for draining, but for some reason when I stand on the casting deck, water starts coming in through those two holes.
Yea I have them too… I’m starting mine now so I’ll have some videos up here in a week
Those wholes are probably from where the battery straps used to be installed .. sounds like you have water inside your hull, you need to get that out and keep it dry or your foam will absorb it .
do you sell it??? its my dream boat!!
Make me an offer 😅
@@sebastian2fn how mach boat only, no need the motor and battery and electronics?
where can i find this boat???? i cant find it anywhere
There is a video on UA-cam, search “most epic tiny boat ever”
The company "Sun Dolphin" has them listed as discontinued on their website. its a bummer!
Cool but must be realy heavy. I fish out of lifetime canoe that i remover center set. 75/ 80 lbs wet.ha