2019 Jeep Cherokee Limited - Car Tech Infotainment How To
Вставка
- Опубліковано 20 сер 2024
- Who has time to read the Owner's Manual???
Car Tech Infotainment How To - 2019 Jeep Cherokee Limited
Is there too much to remember when test-driving or even when taking delivery of your new car? Well, we're here to help. This is our in-depth "How To" video of the 2019 Jeep Cherokee Limited infotainment system. Nathan covers all the buttons, knobs, cameras, bells and beeps to get you up to speed and using your new Infotainment System in no time flat.
🟢 SUBSCRIBE TO OUR CHANNEL: ua-cam.com/users/c...
🟢 SEE all of our HOW TO videos here: CarTechHowTo.com - bit.ly/2ZvDrbE
🟢 GEAR USED TO FILM OUR VIDEOS
GoPro Hero 7 Black - amzn.to/2Ufai1...
Dual Battery Charger - amzn.to/2IntJm...
Protective Housing - amzn.to/2UlWba...
Wireless Go - amzn.to/3loTmS...
Reporter Omnidirectional Mic - amzn.to/3pkgNh...
VideoMico Pro+ - amzn.to/3ncHRh...
VideoMicro On Camera Mic - amzn.to/3nfc53...
Tascam DR-40X - amzn.to/3pl7i2h
Canon EOS Rebel 7ti: amzn.to/3mIi8Oe
🟢 SOCIAL
Facebook: bit.ly/2Tghetr
Twitter: bit.ly/2Tjv9yX
Instagram: bit.ly/2SjJ4YI
TikTok: / twoguysandaride
🚘 Vehicle courtesy of Luther Mankato Honda
🖥 www.luthermank...
Music licensed from www.purple-plan... and UA-cam free music
Attribution-NoDerivs CC by Two Guys and a Ride-ND - Copyrighted material ALL RIGHTS RESERVED
📌 DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, we'll receive a small commission at no extra cost to you.
*All Specs are preliminary data from MFG available at time of filming this video. Subject to change*
#Jeep #JeepCherokee #TwoGuysandARide #2019JeepCherokee #HowTo #CarTech
Just bought my first car and it’s the 2019 Cherokee Trailhawk ty so much this was useful 👍🏽
Glad it helped! Thanks for watching
Just bought a 2019 jeep grand Cherokee 4 x 4 Limited. Was trying to figure out all the screen stuff myself but found your video very helpful. Thanks.👍
Glad we could help. Congratulations on your new ride
I bought 2019 jeep cherokee Overland 4x4 2.0 liter.
Display for Stop/Start keeps saying battery charging has not worked in 3 months.
Not sure what is going on?
Thank you for tutorial great information never really had time explore different set up.
I have 41,000 miles First SUV I have ever owned just happen to have Panoramic sunroof that is really nice.
Thanks for the compliment and the question. It is a warning that your auxiliary battery is not charging. If you have been on a good 45 minute drive at highway speeds that should have charged up the battery, if your still getting the message after a drive like that, then there is a problem, probably a weak battery. So it would be wise to have a mechanic or dealership double check it for you. Hope that helps and thanks for watching!
Thank you so much. Very informative. Maybe you could do one for setting up an android phone. Still can't figure that out.
Thanks for the compliment an the suggestion. Thanks for watching!
Awesome tutorial.
Thanks, and thanks for watching!
Will your phone apps work if you use an android phone?
Yes, but it would use Android Auto for an Android phone. It will look a little different, but yes does the same things as Apple CarPlay. Thanks for watching!
Great video. I have a 2022 jeep Cherokee
Congratulations on your 2022 Jeep! Thanks for the compliment and thanks for watching!
How do you check automatic transmission fluid in 2019 limited 2.4?
Thanks for the question. Typically there’s a dipstick near the back of the engine, but I believe that this is a “sealed for life” transmission, meaning there’s no way to check it and Jeep feels like it should never have to be changed, although a mechanics garage could check it if necessary. I also think there might be a transmission plug in the bottom of the engine that can be removed, and you would then use your finger in the hole method to see if it’s low- but I’m not exactly sure that is correct. Thanks for watching!
Are you able to locate vehicle from Bluetooth? If it’s not set up with app
Thanks for the question. It seems that the answer to that is no. Bluetooth only has a range of about 60 feet max. To use the location services you need to sign up for the Jeep connect services through the Jeep connect app on your phone and you will need to input some info into the app on the cars infotainment system before it will work. Thanks for watching!
Does it have an sos service? Like Sirius guardian
@@sashaalfred8332it does but it runs through the Jeep connect app, then the sos button in the vehicle will work.
In my 2019 Jeep. If I have the my phone connected and I get a call and I answer it and decide I want to transfer it back to the phone. How do I make the radio play the music once it has been transferred?
Thanks for the question. You would need to switch audio sources in the infotainment screen manually to go back to listening to the radio. Thanks for watching!
Thank you its vere useful vedio
Glad it helped, thanks for watching
Hi, thanks for this. How do I turn off the horn beeping when locking/unlocking the door with the fob?
Your welcome and thanks for the question. To adjust how the fob works go to settings on n the infotainment screen and then scroll down the list until you see “doors and locks”. Click on that and you should be able to find the controls for turning off the horn beeps when you lock/unlock the car. Thanks for watching!
@@TwoGuysandaRide definitely need to turn that off as well it’s kinda of annoying ty
My radio randomly scrolls through various settings on its own. I thought a software update might be needed but the website says I already have the latest version. I haven't figured out how to do a factory reset. Any suggestions?
Thanks for the question. If you click on settings in the infotainment screen, scroll to the bottom, you will see an option to reset things back to default. Thanks for watching!
I have a 2019 jeep Cherokee limited & im not seeing a surround sound option ?? Why is that??
Thanks for the question. If you have surround sound you should see the surround sound setting if you click the audio button when your in one of the radio screens. If you don’t see it there, you might want to try restoring the system to its defaults to see if it reappears. Both sound systems (alpine and Harmon Kardon ) have surround sound. Hope that helps and thanks for watching!
I have a 2020 Grand Cherokee Trailhawk and i do not have a trip screen? I cannot for the life of me figure out how to reset trip A and trip B?
Thanks for the question. To access your trip screen use the up and down arrows on the left side of the steering wheel. Click until you come to Trip Info. That is your trip A and Trip B screen. To reset the trips just go to trip A or Trip B and press and hold the “OK” button. That will reset them. Thanks for watching!
How to put vehicle on all wheel drive
Thanks for the question. Depending on what transmission you have in your Jeep, you either do nothing (Quadra-trac I) or there’s a button you can push or rotate to set the 4x4 mode (Quadra-trac II). If you have a Quadra-Trac I then 4x4mode is automatically on all the time, no need for any input from driver. If you have the Quadra-Trac II then you have leave it in the “auto” position (dial in the center console area) to have 4x4 automatically on. But, when needed you can switch to 4x4 lo with a push of a button (I believe you will need to be stopped with transmission in N to make this switch) plus you have several other 4x4 modes the Quadra-trac I does not have. Hope that helps and thanks for watching!
great video!
Thank you!
So the 2019 cherokee does not have the mirrorlink option or projection management
Thanks for the question. It does not have the mirror link option, but it does have Apple CarPlay and Android Auto. Hope that helps and thanks for watching!
With Apple CarPlay, you have to plug it in and connect it in order to set it up ... but once it's been set up, can you unplug it, or does it always have to be connected via cable to use it ?
Thanks for the question. This particular vehicle does require the phone to be plugged in while using Apple CarPlay. If you disconnect the cable, Apple CarPlay will stop working. Thanks for watching!
In my 2019 Cherokee Limited, when I tap on the phone icon on the radio on the top right and says respond with text message I tried to tap that to respond but it’s not set up I don’t know how to set it up through text message can you tell me how ?
Thanks for the question. Hi f I am understanding your question correctly your phone is not connected to the vehicle. To do so on your phone turn on Bluetooth and scroll to the bottom of the list of Bluetooth devices. Then on your cars infotainment screen, click on the phone icon. You may need to also click on add a phone. Then on your phones screen look for the name of the vehicle or manufacturer to show up in the Bluetooth list of devices. Follow the directions on your phone and infotainment screen. Now you phone should be hooked to the car via Bluetooth and texting should now work. Hope that helps thanks for watching!
how would i turn off or delay the speedometer screen once I locked my car?
Thanks for the question. That is predetermined by the manufacturer. There’s not a setting I know of where you can adjust that. You can adjust things like delaying the headlamps to turn off 20-90 secs after you turn the car off. Hope that helps and thanks for watching!
How do I get Apple car play for my 2020 jeep cherokee
Thanks for the question. You should just be able to plug your phone into the front USB port, turn on and unlock your phone, and it should appear. Thanks for watching!
very interesting! now, does anybody know how do i control my car remotely using this very same uconnect system? help please!
Thanks for the question. Download the UConnect app from your App Store. With that you can remote start you’re vehicle, lock/unlock it plus other features. Thanks for watching!
@@TwoGuysandaRide Thank you for the quick answer!
Your welcome!
Mine is a 2019 limited GC but looks nothing like this lol / mines ALL digital
Must have been an option then at the time. Thanks for watching!
Great video! Do you know if there's a way to scroll backward on your presets using steering wheel controls? Thanks!
Thanks! Yes I did but didn’t point that out. All you need to do is use the back scroll button that’s just below the one I used (actually 2 buttons below) right on the back of the steering wheel. Thanks for watching and don’t forget to hit that subscribe button!
When I’m driving and I get a call on my Bluetooth connected iPhone, the ringer volume is so loud that it startles me. Is there a way to lower the ringer volume through Uconnect or another Jeep setting? I’ve tried lowering the Uconnect volume when the phone is ringing, but the ringer goes back to the previous loud setting when the next call comes in.
Thanks for the question. Your not the only one with this issue. Here is the advice Jeep gave
1. Reboot the phone.
2. Make sure that your Bluetooth is connected. Play some music and make sure that the volume on the phone is all the way up. This is just to verify the Bluetooth connection.
3. Make sure for the moment that your phone mute switch is NOT in the mute (orange marking) position.
4. On your iPhone -Go to Settings/Sound and Haptics
5. Turn OFF the slider switch labeled "Change with buttons, but above that move the volume slider all the way to the right.
6. While connected to your Uconnect, place an incoming call to your phone from a different phone.
7. While the phone is ringing, turn the radio volume control on the dash to your desired volume. You should hear the phone ringing.
Hope that helps, thanks for watching and don’t forget to hit that subscribe button!
Great video! Do you know how to do a soft reset? This system always gets buggy with my carplay, same model/make/year, and I reset my phone - but can't reset the infotainment system. ALL things online say hold down the tuner and vulume buttone for 20-30 seconds, but that's not it.
Thanks for the question and the compliment! In the infotainment screen click on the all apps button at the bottom of the screen, then click on the settings app. From there scroll down till you see restore settings to default click on that and follow the prompts. Thanks for watching!
@@TwoGuysandaRide thanks for the reply! I appreciate it. But that’s a hard reset. Does this model not have a way to do a soft reset?
As far as I know there is not, other than what you have already tried.
@@TwoGuysandaRide thanks for your time!
hello I bought a 2019 jeep cherokee at a car store and I can't use the car's bluetooth because it's asking for an unlock code, would you be able to reset and create a new code? thanks for your video.
Thanks for the question. Typically when this happens, the code should appear on your phone for you to type in. Are you not seeing that code on your phone? Thanks for watching!
the car bluetooth is not showing up on my cell phone,
Ok thanks for the reply. Couple of thoughts here, is your Bluetooth turned on on your phone, did you scroll all the way to the bottom of the Bluetooth list on your phone (new ones show up at the bottom of the list) and finally, is your phone’s Bluetooth compatible with the vehicle? Older phones will sometimes not connect. If your phone is no more than 3-4 years old it should work. If you have done all these things already, then you might try and see if there is an update for your phone, or an update for vehicles infotainment system. As a last resort, you can reset your vehicles infotainment system and then try pairing it. To reset your infotainment system to its defaults turn the key to the on position but don’t start the vehicle. Next press the hot and cold buttons simultaneously until a menu pops up on the screen. From that menu, select reset to factory defaults. Now wait about 30 seconds as it reboots (like a computer) You should now be able to start your vehicle and try pairing your phone again. Hope these ideas are helpful and thanks for watching!
Any tips on why Android auto wont stay connected to the system?
Couple of ideas:1. Android or vehicle had an update now won’t stay connected. Solution, roll back the update if you can. 2. If you’re connected via a usb cable, perhaps the cable is bad, or the usb input itself is bad. Hope that helps and thanks for watching!
@@TwoGuysandaRide I have tried the cable thing. I replaced all the cables with factory cables from Google. I even had the main USB hub replaced from the dealership and it still cuts in and out. Currently I am running a Motorola wireless system and it seems to be a little bit better but the USB port still cut in and out periodically
@@TwoGuysandaRide Thank you for getting back to me. I have tried the cable replacement. I have a Google phone and bought Google cords but that didn't fix the issue. The Jeep was even at the dealership for 3 weeks while they replaced the USB main hub and that still didn't fix the issue. Currently I am using a wireless Motorola adapter and it is a little bit better but still cuts out at least four or five times a week, sometimes for 5 seconds. Other times for 2 or 3 days where no USB ports in the vehicle will work. Sometimes I think it might be an Android auto issue because Android auto will cut out, but the USB port is still working for the wireless adapter
Ok so I’d agree that it probably is not a fault with the vehicle. I’m mostly a iPhone user, so I’m not sure you can actually roll back to a previous version on a Google phone, so I would try to either update the Android auto app on your phone, or see if your vehicle has a software update available, if it does, install it and see if either one of these ideas will fix the issue. One other idea is to try and update to Android 10 on your phone, as that will bypass the need for the Android auto app, and perhaps that will work better. Hope that gives you some ideas
@@TwoGuysandaRide I will definitely look into updating my Android to the 10. It's weird because the USB ports will just stop working in the vehicle all together so that's why I thought it was something with the vehicle itself. Would you happen to know how I can figure out if my vehicle is in need of an update?
How do I set up the radio , and add contact's?
To find out how to set up the radio start watching the video at 7:50. If you sync your phone via Bluetooth you get a message that asks if you would like to sync your contacts from your phone, click yes and all your contacts will sync or be added to the vehicle.
I don't want every single contact from my phone , only 4 numbers. Can that be done ? Manually ?
I missed the video , because it was sent to my gmail , and this phone was charging !!! Will you be on tonight at same time?
@@caroljuristo6803yes. If you go into your phone and save those 4 contacts as a group, then go into your Bluetooth settings on your phone and click on sync contacts, but then if you look down a little from that sync button you will probably see that several items already have a blue checkmark beside them, uncheck them all and then click on the group of 4 contacts you created, and a checkmark should show up next to that group. And that should be the only item that’s got a checkmark by it. Now when you connect your phone to the vehicle it should import just those 4 contacts. If it doesn’t sync for some reason you may want to tell your phone to “forget this device” then resync the phone to the vehicle. Hope that helps and thanks for watching!
I will be watching tonight at 7:30 Friday June 28th
On mine, when I store an address on the built-in GPS, there does not appear to be anyway to associate a name with an address. Any suggestions?
Thanks for the question. When you type in an address or select one from the list, you should see a Save button on the lower right of the screen. If you click that you can then erase the current name and rename it whatever you wish. Hope that helps and thanks for watching!
@@TwoGuysandaRide Well, I have successfully input various addresses for my Doctors, relatives, friends. The addresses were easy to input and, of course, I hit the save button that you mention. But I don't see how I can associate a name with the addresses that I already input. See what I mean? I have input about 10 addresses, but I don't see how to input the names that go with the addresses. Thanks in advance.
Ok I see what you mean. Try this… open navigation, click on where to, then click on edit where to, select the address you wish to edit and see if you can rename it from there. Short of that, you would need to delete those addresses and put them in again using the steps above. Hope that helps and thanks for watching!
@@TwoGuysandaRide Will try. Seems my old Garmin was much easier. Thanks for your time.
No problem. Good luck!
how big is screen?
Thanks for the question. At 6:29 I describe the screen size as 8.4”.
This not the dash cluster we have on our 2019 Jeep Cherokee Lattitude. Completely different place for gas and temperature gauge. Was there a mid year change for the dash cluster?
This is a Jeep Cherokee LIMITED
@@TwoGuysandaRide Thank you for the reply that I noticed in the title.
So the limited cluster and the lattitude cluster are different in the same model year? In our 2019 lattitude the info screen is going crazy all on it's own. Only has 30 grand on it.
@@slrpirate2372 we’re assuming they are different since yours is the same model and year. Unfortunately if your system is wacky, we can’t help. Sounds like a dealership visit is in your future. I’m sure you just love hearing that 😎
@@TwoGuysandaRide I have over 20 years in the automobile business with what was the original Chrysler Corp. 1970 to early 1990's. We have had 3 Cherokees. Starting with a 2014. We still have the 2019 Lattitude and a 2017 Cherokee sport.
The 2014 was a bad year for Cherokee. Fiat Chrysler's electronics leave a lot to be desired. The operator has nothing to do with the issues the screens have.
Love the performance hate the electronics. I liked mechaincal stuff better
I was the general manager of the dealer we purchased our Jeeps from.
Dealer service is not what it used to be is all I am saying.
I appreciate the replies.
@@slrpirate2372 we agree! We’re not fans of Chrysler or Jeep products right now because they do suffer from many quality issues
7:13
Yep, movable icons, nice feature. Thanks for watching!