Now wait a minute! I am a 76 year old X Marine Corp male, a woodworker, a fisherman, who love to make leather bags, purses, belts and loves his beautiful wife, who told me about your videos. So maybe you need to start saying “OK Ladies and GENTLEMEN”. 😀
I want to thank you for putting this video together an out there. I have been all over the board trying to make bags and have them turn out right I was either getting them too frumpy or omg stiff. After watching this video I went out and purchased the items you used here and OMG it turned out so great. I am very new to sewing but bags seem to be my thing, lol and now I'm gonna love making them. Thank You so Very Much.❤❤
Seriously one of the things I try to avoid is skipping steps. It's SO ANNOYING when you're watching tutorial videos and people gloss over important things.
@@Bagsandthingsbysilvia I do lots of leather, and I recommend not lining as leather dries better on its own. lol 😂 … more recently I took a sewing class where there was very complicated assembly of cloth, ironed in pads, and linings… I might be missing the ideas 💡… but why try to make it padded when there are flannels and other fabrics similar?
I enjoyed your technique for making the lining "fit". I had a smile on my face while I was watching... I've been making bags for 5 years and I believe I can always learn something new. Thank you for sharing your skills. I have subscribed.
Well done; nice & clear explanations. For those of us inclined to forget things mid-project, I might suggest to just Cut the lining to reflect the video's changes, and then sew with your usual seam allowance throughout.
SO GLAD you did thid tutorial!! I used my own initiative when I made a little tote bag for my granddaughter, and basically did the same thing, because the lining was all baggy - that was before I saw your tutorial. Then I went searching to see WHY Tote Bags always looked like their lining was baggy!! So, THANKYOU!!! Very good tutorial, with all the basics covered here. Well done. I have been quilting for many years, but just lately been making some Tote Bags. Thanks from Sue in South Australia.
you are so knowledable and detail oriented in your videos - thank you. I am just getting back into sewing and during Covid I have made a lot of project bags for my knitting friends and i was not happy with my linings, thank you for this tutorial, it will correct the problem. I haven't been putting interfacing in my linings, but will try the SF 101. Also enjoyed your video on linings. Keep making these wonderful videos.
I’m new to bag making and this is the first time this was explained to me and didn’t leave me still clueless. Probably just because I jumped into sewing with both feet and without an actual “teacher” hounding the basics into me. 🤦🏼♀️🤣 I was making smaller bags, about this size, and no matter what I was doing, the shape only looked right about half of the time. The way you’ve explained this so simply made so much sense to me! I still have a stack of smaller bags that are stopped halfway through because they were coming out so differently. Today’s task is going to be finishing them and getting them outta my UFO box keeping your method in mind. Thanks for sharing!
Yes bag making lingo can be very interesting. Made a clutch for my daughter for her wedding. It actually said to “smash the seam, and use a hammer if needed, to get the bulk to fit under the presser foot”!!!! Thankfully the clutch turned out beautifully! And no hammer was required😂😂
Thanks so much for tip I had to learn the hard way by stitching exactly then putting in the bag then having to go back in to the lining and make the seam allowance larger. Came out great though
Thanks for explaining this!! I've just started sewing and have really falling in love with making bags! Your tutorial is going to bring me to the next level. THANK YOU
5/26/23: This was a great tutorial, and one in which will save me when doing my linings because mine almost always come out being way too much extra. Thank you so much.
I am so glad you tube pays attention to what I have been watching and recommends other designers, that is how I found you. WhooHoo, so I have been watching tutorials for months as several months ago I made 3 different pouches and the linings were horrible and have been looking for ways to have the lining look and fit better. I am so new to this, however it really is so much fun!! So I decided to dive in again with a simple, but not so simple tote( I felt the need to add pockets inside/out and a tab inside for hanging keys, no zipper yet)!! I used your tutorial for the lining Thank you, thank you, and Thank you again, I can not believe how incredible the lining looks with the tote. Thank you again for taking the time to share your experience with us.
Finally, youtube catching on to what I really like to watch. Love your podcast , sewing instructions are perfect along with entertaining. Sewing bags are my favorite stay at home projects for unfinished knitted objects. Thanks! 🤩🤩
For me, the best way is to stitch the lining taut to the outer (material + interfacing) I finish the raw seams with piping. This way the lining always stays taut and never bunches up.
I started doing this with my thread catchers because I do mine tote bag style. My linings were so saggy until I thought of just scooting the seam allowance in a bit. The only thing you have to be careful of is making sure your turning hole matches on the top and bottom or sewing it up turns out wonky
2:31 Calif time. I’ve only watched one of your videos and knew I wanted to subscribe. Love love love your antics🤗 it works for me‼️ I watch a lot of sewing videos. This is first one I’ve seen on the saggy lining. Thanks‼️❤️
I love your videos. Not only are you a great teacher but you are so funny.....I always get a good laugh. Thanks we all need a little humor in our lives nowadays!
I saw your video and I loved it. When I made my bags the liner was too much. I did what you shared and now they are great what you showed helped me make better bags. Thank you so much . I just found your videos a couple days ago and they are great
I making lined bucket hats and end up with the crown section always sagging. I'm going to apply the sagging bag correction to lining my hats. I think in theory this method should work for the hat lining since it's a basically a tote bag for your head!
This is one of these things where I think, that’s so simple why didn’t I think of that! 😜. I have often as a beginner found the lining being baggy and I didn’t like it is just brilliant and I will use it from now on.thank you
Curious why you worked hard to get the lining corners pushed out when you really want them pushed in the other way so the fit the exterior when the lining is inserted into the bag, but you didn't push the exterior corners out at all that I could see.
I'm watching this again 4 years later, and it's still so relevant. I finally have a habit of doing this on the sides, but for some reason, the top-to-bottom length still gets a little wonky - probably because I don't fold the bottom seam high enough. Thank heavens it's not immediately noticeable 😉 Weird to think how panicked we all were about lack of TP (and not much else) once the lock-down was in effect.
Hi, I am Isabel. Thank you for your tutorials. I am a beginner bags making and it is difficult for me to understand all the materials we need and where to get them. I am in Spain and will try to get all your tutorials. Your explanations are clear to me. So, thank you so much.
I have made grocery tote bags where the instructions didn't say to use a larger seam allowance..and I didn't care if the lining was a bit baggy. However, I just made my first purse (Swoon Ethel) and I thought it said halfway down to start enlarging my seam allowance. I think I even waited til it was 3/4 down before I made it smaller. Big mistake! My lining is a mess and now that it is topstitched, I don't think I can fix it without ripping it all out. Also in the pattern it said to leave your birthing opening on the side, I think I would prefer at the bottom. You can leave a larger hole there too. I am going to start birthing it via the zippered pocket lining instead because who really cares if the topstitched close of the opening is in that pocket? I added a zippered pocket to the bag Ethel, but didn't think to use that pocket opening to birth the bag... TY for your post.
OMG YES. I've spoiled them while sheltering in place and let them into the room. That's Luna. She believes the room is full of treats (it is, but shhhh).
OMG WHY didn’t the pattern I bought say this (it wasn’t one of your patterns)? I just finished a bag today, and it was so fugly inside! I’m saving this video so that the next time I make a bag, it will be pretty!
This is the first time I have seen one of your videos. I learnt a lot watching this tutorial. Thanks so much! I have been teaching myself to quilt/sew since January. I do have a question. Can you use a stabilizer to give the bag sturdiness plus use a batting so it can be quilted? I made my sisters a ‘bag’ to sit beside their recliners but to say they are floppy is an understatement. If I can’t use both how can I rectify the problem I’m having? Again, thanks so much! (I’m a new subscriber)
Yes you can use both! If I need a bag to be stiff like that, I'll use woven interfacing on the exterior AND interior pieces, then add the stabilizer to the exterior.
Fierce Kittenz Thank you so much for responding to my question. I have learnt a lot from the two tutorials I have watched so far. You are a thorough teacher and explain things well.
I VERY RARELY use fleece interfacing. I definitely won't use it on the lining. If I am using a quilting-weight cotton, I'll use a woven interfacing like Shapeflex 101.
@@fiercekittenz Thank you so much! Also, when is the wedding? I'd love to be there? 😄I'll probably be watching your tutorials over and over again. At 75, my memory not as great as it used to be. Though I taught myself how to sew when pandemic started, I still consider myself a novice. Scared of putting zippers on and making clothes! Peace out! You are amazing!
Being a bag lady makes me happy and I’ve been trying to Learn as much as I can. Your videos are my favorite. I just found you. Or UA-cam just suggested you. I have a question though . . . I’ve been sewing since before you were a twinkle in your daddy’s eye and thought I knew everything. I’ve learned I can learn more. Why do you make a half inch seam and then cut back to quarter? Can’t I just make it a quarter? There must be a reason or you wouldn’t waste your time. I look forward you the “why” or a referral to a different video. Thanks muchly. 😉
Oftentimes it's to give you enough wiggle room because of all of the layers. The larger the bag, the larger the interfacing. Once you hop into fleece and foam, you get a lot of "squish" and that 1/4" becomes VERY sketchy. Smaller bags I do a 1/4" usually on my own accord, but the pattern still calls for 3/8" or 1/2".
Just found you ! I'm a fellow accessory maker and it is always nice to see other technique. Like "Oh , clever ! Will try that next time " 😲 I have to get use to the Imperial mesures , tho loll
Amazing tutorial l, this is the first time I’ve actually understood how to get a nice lining and your humour makes me laugh. My only question is what do you do when the seam allowance is already a 1/4 inch? Do you cut a bigger size? And how do you taper the seams with a boxed corner? Do you just taper in the middle and the go back to the normal allowance?
If the seam allowance is 1/4" for the bag, then the interior seam allowance should go up to about 3/8" or 1/2" - and just taper back to 1/4" when you get close to the zip or top edge.
Lol first day subscriber again but so funny I have a thread zapper and never even thought to use it for sewing lol I used it for beading thank you again
This sounds crazy even for me but I love the way your sewing foot "walks". So cute like a little robot. P. S. You are a very good teacher,❤ loved your videos ty
Typically this is something for bag patterns that have a lot of structure in them, specifically fleece or foam. The thicker and floofier the interfacing used to stabilize the fabric, the more likely it is that you'll "squish" the exterior and lining fabrics such that they bend a bit around the presser foot and may not get caught in the seam allowance. The 1/2" is a good buffer, but oftentimes way too big. I've since started using 3/8" in my more recent patterns.
Wow. You had me a "stacking mixing bowls of the same size" -- something I had struggled with and tried to understand, and now it makes perfect sense. THEN you went and showed how you taper the opening of the bottom for reversing -- WHY OH WHY isn't that a vital part of every bag maker's repertoire?? Thank you.
@@fiercekittenz This reminds me of the conversation I had with my late husband about databases. I said each house in our neighborhood was a different file cabinet. Each cabinet had different drawers/rooms. All the rooms had different furniture/folders assigned to them. Etc. Had a coworker just starting with programming and couldn't grasp subroutines. I told her to think of going to a new office building and at each floor automatically looking at the signs across from the elevator to know you were on the right floor and whether to go left or right for a specific office. My husband thought I was great for helping him understand, though vaguely, what I was doing on the computer. And had an "ah hah!" moment when I told him about the subroutine explanation.
Love your channel. I am wondering, though, would this method work if you're wanting to sew a "stay - put" lining in your bag ? TYSM for sharing this video with us.
Thank you! No, probably not. If you want the lining to stay put, you'd either need to tack it into the seam allowance at the bottom - hiding the stitches in the seam OR you could just do bias binding. I don't mind bias binding at all on zippered bags. If it's a bag with a lot of depth, it actually gives it a lot of structure!
Thank you for this! May I ask where you purchased the stand for your heat press? I just purchased the Artistic heat press and would love to have a stand for it.
Now wait a minute! I am a 76 year old X Marine Corp male, a woodworker, a fisherman, who love to make leather bags, purses, belts and loves his beautiful wife, who told me about your videos. So maybe you need to start saying “OK Ladies and GENTLEMEN”. 😀
This is an older video, before I had trained myself to use more inclusive language. You’re absolutely right!
Again a very entertaining and educational video. Brilliant thank you 😊
😊 love this. Yay! Everyone can sew!
Calling shotgun! I love ❤️ making leather crafts! But I’m still wondering why women make things so complicated?
AHA! Thank you! I've been coming across the "saggy lining" issue recently and I really appreciate this video!
I want to thank you for putting this video together an out there. I have been all over the board trying to make bags and have them turn out right I was either getting them too frumpy or omg stiff. After watching this video I went out and purchased the items you used here and OMG it turned out so great. I am very new to sewing but bags seem to be my thing, lol and now I'm gonna love making them. Thank You so Very Much.❤❤
Thank you for this great tutorial! And THANK YOU for not skipping any steps, for us beginners that is very helpful!
Love your tutorials! 👏🏼👏🏼👏🏼
Seriously one of the things I try to avoid is skipping steps. It's SO ANNOYING when you're watching tutorial videos and people gloss over important things.
@@Bagsandthingsbysilvia I do lots of leather, and I recommend not lining as leather dries better on its own. lol 😂 … more recently I took a sewing class where there was very complicated assembly of cloth, ironed in pads, and linings… I might be missing the ideas 💡… but why try to make it padded when there are flannels and other fabrics similar?
How fitting that you are using a miniature light sabre for trimming the threads on a star wars bag 👍
I enjoyed your technique for making the lining "fit". I had a smile on my face while I was watching... I've been making bags for 5 years and I believe I can always learn something new. Thank you for sharing your skills. I have subscribed.
Well done; nice & clear explanations. For those of us inclined to forget things mid-project, I might suggest to just Cut the lining to reflect the video's changes, and then sew with your usual seam allowance throughout.
From one detail oriented perfectionist to another - good job! Excellent tutorial!
SO GLAD you did thid tutorial!! I used my own initiative when I made a little tote bag for my granddaughter, and basically did the same thing, because the lining was all baggy - that was before I saw your tutorial. Then I went searching to see WHY Tote Bags always looked like their lining was baggy!! So, THANKYOU!!! Very good tutorial, with all the basics covered here. Well done. I have been quilting for many years, but just lately been making some Tote Bags. Thanks from Sue in South Australia.
Agree! Top stitching makes all the difference. Worth it to take your time and sew a straight line.
you are so knowledable and detail oriented in your videos - thank you. I am just getting back into sewing and during Covid I have made a lot of project bags for my knitting friends and i was not happy with my linings, thank you for this tutorial, it will correct the problem. I haven't been putting interfacing in my linings, but will try the SF 101. Also enjoyed your video on linings. Keep making these wonderful videos.
I’m new to bag making and this is the first time this was explained to me and didn’t leave me still clueless.
Probably just because I jumped into sewing with both feet and without an actual “teacher” hounding the basics into me. 🤦🏼♀️🤣
I was making smaller bags, about this size, and no matter what I was doing, the shape only looked right about half of the time. The way you’ve explained this so simply made so much sense to me! I still have a stack of smaller bags that are stopped halfway through because they were coming out so differently. Today’s task is going to be finishing them and getting them outta my UFO box keeping your method in mind. Thanks for sharing!
Keep going! It takes time to hone a craft. Don't give up!
Yes bag making lingo can be very interesting. Made a clutch for my daughter for her wedding. It actually said to “smash the seam, and use a hammer if needed, to get the bulk to fit under the presser foot”!!!!
Thankfully the clutch turned out beautifully! And no hammer was required😂😂
Thank you! Once again a lovely tutorial simple and to the point. I really love watching your tutorials and learn so much. 😃😍
Thanks so much for tip I had to learn the hard way by stitching exactly then putting in the bag then having to go back in to the lining and make the seam allowance larger. Came out great though
Thanks for explaining this!! I've just started sewing and have really falling in love with making bags! Your tutorial is going to bring me to the next level. THANK YOU
Every time you got that thread zapper, I found myself holding my breath. LOL. I had never seen one of those before!
Very nice finish. I have made many tote. bags and yes the interior was always a bit saggy. I doubt anyone noticed but I did. Thank you so much
I love your sense of humor! Ive never laughed so loud watching a sewing tutorial ever lol!!!
5/26/23: This was a great tutorial, and one in which will save me when doing my linings because mine almost always come out being way too much extra. Thank you so much.
I am so glad you tube pays attention to what I have been watching and recommends other designers, that is how I found you. WhooHoo, so I have been watching tutorials for months as several months ago I made 3 different pouches and the linings were horrible and have been looking for ways to have the lining look and fit better. I am so new to this, however it really is so much fun!! So I decided to dive in again with a simple, but not so simple tote( I felt the need to add pockets inside/out and a tab inside for hanging keys, no zipper yet)!! I used your tutorial for the lining Thank you, thank you, and Thank you again, I can not believe how incredible the lining looks with the tote. Thank you again for taking the time to share your experience with us.
Oh I'm so glad it helped you!!!
Thank you so much for taking the time to help us be better bag ladies or bag dudes!
Finally, youtube catching on to what I really like to watch. Love your podcast , sewing instructions are perfect along with entertaining. Sewing bags are my favorite stay at home projects for unfinished knitted objects.
Thanks! 🤩🤩
Your video was very helpful in making the liner fit in the tote bag I am making. You had me laughing as well, thank you!
For me, the best way is to stitch the lining taut to the outer (material + interfacing)
I finish the raw seams with piping.
This way the lining always stays taut and never bunches up.
You're really good at explaining this stuff, totally made my backpack project come to life! Thank you!
I started doing this with my thread catchers because I do mine tote bag style. My linings were so saggy until I thought of just scooting the seam allowance in a bit. The only thing you have to be careful of is making sure your turning hole matches on the top and bottom or sewing it up turns out wonky
2:31 Calif time. I’ve only watched one of your videos and knew I wanted to subscribe. Love love love your antics🤗 it works for me‼️ I watch a lot of sewing videos. This is first one I’ve seen on the saggy lining. Thanks‼️❤️
I love your videos. Not only are you a great teacher but you are so funny.....I always get a good laugh. Thanks we all need a little humor in our lives nowadays!
I saw your video and I loved it. When I made my bags the liner was too much. I did what you shared and now they are great what you showed helped me make better bags. Thank you so much . I just found your videos a couple days ago and they are great
My bag linings ain't saggin' no more! Thanks! Like the mixing bowl analogy!
I making lined bucket hats and end up with the crown section always sagging. I'm going to apply the sagging bag correction to lining my hats. I think in theory this method should work for the hat lining since it's a basically a tote bag for your head!
Another great video! Very helpful tips. Thank you, I feel like I am learning so much!
Very helpful information thank you. Going to see if you have newer videos.
I wish i knew this before I started making my bags, but glad I am still learning , thank you👍
You’re welcome 😊
Now i want to remake all my bags with sad saggy linings. I didn't know this method before, what a great idea and demo.
I really really love the intro of your videos. You really offer great Informative videos, really love it.
Another great video! Thank you for sharing such great tips!
This is one of these things where I think, that’s so simple why didn’t I think of that! 😜. I have often as a beginner found the lining being baggy and I didn’t like it is just brilliant and I will use it from now on.thank you
Curious why you worked hard to get the lining corners pushed out when you really want them pushed in the other way so the fit the exterior when the lining is inserted into the bag, but you didn't push the exterior corners out at all that I could see.
I'm watching this again 4 years later, and it's still so relevant. I finally have a habit of doing this on the sides, but for some reason, the top-to-bottom length still gets a little wonky - probably because I don't fold the bottom seam high enough. Thank heavens it's not immediately noticeable 😉
Weird to think how panicked we all were about lack of TP (and not much else) once the lock-down was in effect.
Thank you, thank you, thank you!!! I really needed this! Plus, I love your sense of humor. So happy I found you!
Would you please demo how to avoid a saggy bag lining on a boxed corner bag. Thank You.
I really enjoyed this. Learned a lot and left with a big smile on my face. Thank you!
Really informative video!! Picked up some great tips. Keep up the great work!!
Thanks for taking the time to do this. My biggest issue is excess lining at the bottom of the bag. Or where the sides meet the bottom panel.
I've always cut my linings 1/2" shorter than the main bag; it works out great :)
Thank you so much for sharing your tutorials! Every one of your videos have made me a better bag maker.
I'm so glad to hear that!
This is the best info I’ve seen. Thanks
Just love your videos! You are so uplifting 😊💕
Awsome, thanks so much for the clear explanation. Going to try this on my next Cool Time Lunch bag.
Thank you for this! Your instructions made my totes much better, quicker to assemble with nice tight linings!
Love this tutorial. Thank you. I am going to try this with my next bag.
UA-cam finally suggested one of your videos today. You are hilarious!
Hah great! Thank you!
This is a good channel. I’m glad I found it.
Great video, very helpful just what I needed today
Hi, I am Isabel. Thank you for your tutorials. I am a beginner bags making and it is difficult for me to understand all the materials we need and where to get them. I am in Spain and will try to get all your tutorials. Your explanations are clear to me. So, thank you so much.
Thank you so much for sharing this. That is so snug. Love this advice, Just what I needed.
I have made grocery tote bags where the instructions didn't say to use a larger seam allowance..and I didn't care if the lining was a bit baggy. However, I just made my first purse (Swoon Ethel) and I thought it said halfway down to start enlarging my seam allowance. I think I even waited til it was 3/4 down before I made it smaller. Big mistake! My lining is a mess and now that it is topstitched, I don't think I can fix it without ripping it all out. Also in the pattern it said to leave your birthing opening on the side, I think I would prefer at the bottom. You can leave a larger hole there too. I am going to start birthing it via the zippered pocket lining instead because who really cares if the topstitched close of the opening is in that pocket? I added a zippered pocket to the bag Ethel, but didn't think to use that pocket opening to birth the bag... TY for your post.
Thanks!!! Nice snug lining!!
Wow, this is going to help a lot, Thank You so much!
I'm going to try this it's a great idea thank you may be they may look better now
I definitely want to try interfacing both inner and out lining.
I had to pause and rewind to figure out if that was your cat meow-ing or mine! Haha AWESOME tutorial for the Tiny Tote which is totes adorbs. ;-)
OMG YES. I've spoiled them while sheltering in place and let them into the room. That's Luna. She believes the room is full of treats (it is, but shhhh).
I checked on mine too😂
Again, best YT channel!
OMG WHY didn’t the pattern I bought say this (it wasn’t one of your patterns)? I just finished a bag today, and it was so fugly inside! I’m saving this video so that the next time I make a bag, it will be pretty!
"We're getting married next Spring!"...😂😂
Congratulations 🎈🎉🍾🎊
Easily watchable on 2x speed.
You have great tips!!! Thanks for the video's!!!
So awesome. Glad u filmed sewing the opening.
You are AMAZING!! You have just solved my problem!! Yes!!! Thank you, thank you, thank you!!! Love it!!
I'm so glad!!!
This is the first time I have seen one of your videos. I learnt a lot watching this tutorial. Thanks so much! I have been teaching myself to quilt/sew since January. I do have a question. Can you use a stabilizer to give the bag sturdiness plus use a batting so it can be quilted? I made my sisters a ‘bag’ to sit beside their recliners but to say they are floppy is an understatement. If I can’t use both how can I rectify the problem I’m having? Again, thanks so much! (I’m a new subscriber)
Yes you can use both! If I need a bag to be stiff like that, I'll use woven interfacing on the exterior AND interior pieces, then add the stabilizer to the exterior.
Fierce Kittenz Thank you so much for responding to my question. I have learnt a lot from the two tutorials I have watched so far. You are a thorough teacher and explain things well.
Finally someone addressing the saggy lining. Thank you. Just a question: Do you also use fleece interfacing on the lining material?
I VERY RARELY use fleece interfacing. I definitely won't use it on the lining. If I am using a quilting-weight cotton, I'll use a woven interfacing like Shapeflex 101.
@@fiercekittenz Thank you so much! Also, when is the wedding? I'd love to be there? 😄I'll probably be watching your tutorials over and over again. At 75, my memory not as great as it used to be. Though I taught myself how to sew when pandemic started, I still consider myself a novice. Scared of putting zippers on and making clothes! Peace out! You are amazing!
I Really like the "zappy thread thing"!
Thanks so much for this tutorial, very helpful! Also you have personality plus!
Being a bag lady makes me happy and I’ve been trying to Learn as much as I can. Your videos are my favorite. I just found you. Or UA-cam just suggested you. I have a question though . . .
I’ve been sewing since before you were a twinkle in your daddy’s eye and thought I knew everything. I’ve learned I can learn more. Why do you make a half inch seam and then cut back to quarter? Can’t I just make it a quarter? There must be a reason or you wouldn’t waste your time. I look forward you the “why” or a referral to a different video. Thanks muchly. 😉
Oftentimes it's to give you enough wiggle room because of all of the layers. The larger the bag, the larger the interfacing. Once you hop into fleece and foam, you get a lot of "squish" and that 1/4" becomes VERY sketchy. Smaller bags I do a 1/4" usually on my own accord, but the pattern still calls for 3/8" or 1/2".
Love your instructions
Hi!!! Loving these videos!!! I’m 3 years behind but catching up fast!! Thank you for these videos!!! Where can I get the thread zapper? 🤣🤣🤣
Amazon!
Love your videos! Very informative.
Great video to solve my problem. One questions do you usually add light interfacing to your lining?
Yes, I typicall use wovenfuse or SF101, a lightweight woven interfacing basically.
I've just discovered you! Thank you so much for a great video. Best wishes from the UK.
Just found you ! I'm a fellow accessory maker and it is always nice to see other technique. Like "Oh , clever ! Will try that next time " 😲 I have to get use to the Imperial mesures , tho loll
Amazing tutorial l, this is the first time I’ve actually understood how to get a nice lining and your humour makes me laugh. My only question is what do you do when the seam allowance is already a 1/4 inch? Do you cut a bigger size? And how do you taper the seams with a boxed corner? Do you just taper in the middle and the go back to the normal allowance?
If the seam allowance is 1/4" for the bag, then the interior seam allowance should go up to about 3/8" or 1/2" - and just taper back to 1/4" when you get close to the zip or top edge.
Thank you so much! I’ll give it a try!
You are so my people! Thank you from a newbie!
Loved the tutorial.
If it helps I use a straight pin in the corners to tease them out if I can't get them out with the pointer or pushing. Thanks for the info!
A friend of mine suggested a book binding tool that has a pretty good point to it! Just have to worry about not poking TOO hard.
Lol first day subscriber again but so funny I have a thread zapper and never even thought to use it for sewing lol I used it for beading thank you again
This sounds crazy even for me but I love the way your sewing foot "walks". So cute like a little robot. P. S. You are a very good teacher,❤ loved your videos ty
You have such a cute personality
Great tutorial! Thanks!
Loved the video! Sooo jealous that you have access to that fabric in the States! I CAN NOT find it in inside my customs zone... 😍
You are hilarious and this was an amazing video!
Great tips!
Curious to know why make the seam allowances 1/2 " and later trimm it to 1/4"? Wouldn't be simpler to see 1/4" from the start? 😮
Typically this is something for bag patterns that have a lot of structure in them, specifically fleece or foam. The thicker and floofier the interfacing used to stabilize the fabric, the more likely it is that you'll "squish" the exterior and lining fabrics such that they bend a bit around the presser foot and may not get caught in the seam allowance. The 1/2" is a good buffer, but oftentimes way too big. I've since started using 3/8" in my more recent patterns.
Aha!!! Great example with the mixing bowls 😊....ok.....back to the video 📹
Love your videos!
Brilliant! Great technique!
Hi Maria from the UK,great tutorial,thank you
Can’t wait to try this, do you have one for lined zipper bags??
Check out my tutorial on the Blue Calla Clematis! It’s a free pattern and a lined zipper bag!
Wow. You had me a "stacking mixing bowls of the same size" -- something I had struggled with and tried to understand, and now it makes perfect sense. THEN you went and showed how you taper the opening of the bottom for reversing -- WHY OH WHY isn't that a vital part of every bag maker's repertoire?? Thank you.
I have this weird thing where I only explain stuff using metaphors. Oddly, it works! You should see my programming streams.
@@fiercekittenz This reminds me of the conversation I had with my late husband about databases. I said each house in our neighborhood was a different file cabinet. Each cabinet had different drawers/rooms. All the rooms had different furniture/folders assigned to them. Etc.
Had a coworker just starting with programming and couldn't grasp subroutines. I told her to think of going to a new office building and at each floor automatically looking at the signs across from the elevator to know you were on the right floor and whether to go left or right for a specific office.
My husband thought I was great for helping him understand, though vaguely, what I was doing on the computer. And had an "ah hah!" moment when I told him about the subroutine explanation.
Hello. Just found your video as I’m fed up of baggy linings. Can’t wait to make a bag now 🙂
Can I ask would your technique
work on a boxed corner?
Yep! It'll be fine. You just need to make sure the lining is tapered to a wider seam allowance.
Love your channel. I am wondering, though, would this method work if you're wanting to sew a "stay - put" lining in your bag ? TYSM for sharing this video with us.
Thank you! No, probably not. If you want the lining to stay put, you'd either need to tack it into the seam allowance at the bottom - hiding the stitches in the seam OR you could just do bias binding. I don't mind bias binding at all on zippered bags. If it's a bag with a lot of depth, it actually gives it a lot of structure!
Thank you so much for making this video ❤️ Could you please tell me what type of thread you recommend for making this project?
For a bag this size you can get away with a general, all purpose thread!
Thank you for this! May I ask where you purchased the stand for your heat press? I just purchased the Artistic heat press and would love to have a stand for it.
This one is specific to my Steamfast. I don't think it's generic at all, but I got it at Amazon!
Great tip. Thank you.🥰