Great to see you back after such a long time ! So many videos on UA-cam but when your name comes up it’s mesmerising quiet , the music haunting , the setting is always something out of this world , I get why you moved out there , amazing , keep safe Reg your an inspiration 🌲🙏
Good morning Reg, Thankyou so much for doing another Stella video.. It must be a pain to video when all you want to do is concentrate and crack out the job.. But I really appreciate your time and energy into providing these... Over the years I learnt SO much for you which I've implemented into my Arb life. Thanks again and hope you have a great day. Dave from West Sussex England
Ray from Australia here, awesome videos. Been watching them for years now. Cool to see a ported 390xp up there with you. My favorite saw. Have a great week👍
The nibbling away at the last bit of the felling cut to gently reach the point of balance under total control...is brilliant! I love watching this, and the only other climber I can recall do it with such precision & patience is Graeme McMahon. What exalted company the two of you make.
Thanks for taking the time to film and edit this stuff, I know it must be a lot of work, but I also know we all appreciate the effort. The music adds a hell of a lot of gravitas to the proceedings as well, well chosen
If only the video can show the adrenaline rush that you have while topping a 200 ft tree It's so hard to explain in a video. You nailed it Brother My adrenaline was with you on this video I needed that. 👊 nice editing
Great to see a new video from you. Just watching you cut that big wood all the way to a slither of hinge always gets my heart racing. Great job as always.
@@RecoatesOutstanding climbing and cutting Sir. I'm hearing the MK III needs ten to fifteen tanks before the electronics dial in the carb. When they wake up they are supposed to be a weapon. I just hope the build quality is better that previous versions, 👍💪🪓🌲🇮🇪
@@Recoates I know you know about this ridge. Did you do the auto tune to it immediately? You let it idle for 3 minutes and then you run it wide, open and run it down a piece of wood and Bury the tip and keep going down for 40 seconds. It helps a lot mind had the same problem once. I did that it was amazing hope that helps buddy
Fantastic content at the top, and the ambient music really helped to heighten perilous moments up there like traversing between trunks! Do you ever allow yourself a moment to wonder what if something were to fail in the rigging or are you always held by at least two different ropings?
Yes Chis, I make a habit to contemplate the contemplate the what iffs. Deliberately envisaging the worst possible outcome is part a technique that helps keep me focused and disciplined. Kinda morbid, but it's worked so far
I know to you this is all old hat, but to most of us we will never get to be in the canopies that you get to call your office, so from us small tree cutters I thank you for taking us on a ride of a lifetime. I know you have been in some tall trees, so I was wondering what was the tallest tree you have taken down and the tallest you have climbed recreationally?
I don't do rec climbing, and it's very difficult to say which was the tallest. The old growth fir I've worked on here are generally between 200-250 ft. There was once a heavy leaner that I did which stood out in my mind because it was way above all the others that I could see in the group. But being up there you are sharply focused on getting the job done safely. Height only factors into your mind depending on how far your line is from the ground for when you inevitably have to swap for a bigger saw
8:18. I would like to talk to someone that knows for sure the proper angle for the face, depending on the elevation, length of log, etc, to figure out the way to land flat. Obviously you know, but I’m still guessing. Most are good, but I’ve planted a few, to my shame!😆🌿🌸Great stuff!
Assuming it's vertical. The piece you're cutting should be 1/5 of the stem. Deep conventional 45 degree notch a little more than halfway should make it flip and land flat. August gets them flat more by 'feel' and giving a little push upward on the butt as it leaves to get a rotation
A lot of it is that one fifth ratio if you are free to choose length of logs. From higher in the tree and on smaller wood you can effect the spin a surprising amount by a tap with your hand. Less than 1/5 could use a down slap to the butt to slow the spin, longer pieces a hand under(but not in the undercut!)allowing the tip to get ahead on the rotation.
Reg is cutting stuff over a hundred feet up in the air than I cut on the ground here in the east! And that's some very ominous music, quite appropriate for the scale of this tree!
Awesome transfer at H E I G H T - Smooth & no cowboy / tarzan stuff just Real Life Safe Arborist - Thanks Reg 👍 Professional Business as usual - from Calvin Woodman at Barrie Ontario Brother 🌄
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Always a good day when Reg uploads a video
F.yeah !!!
Yup
Agreed m8!
I was so busy felling trees that I missed it first 😅
Great to see you back after such a long time ! So many videos on UA-cam but when your name comes up it’s mesmerising quiet , the music haunting , the setting is always something out of this world , I get why you moved out there , amazing , keep safe Reg your an inspiration 🌲🙏
The control of the fear and adrenaline to carry out such controlled dismantling when working on such a colossal tree is inspiring.
Top a tree, and stack the logs, simultaneously. Legend.
Good morning Reg, Thankyou so much for doing another Stella video.. It must be a pain to video when all you want to do is concentrate and crack out the job.. But I really appreciate your time and energy into providing these... Over the years I learnt SO much for you which I've implemented into my Arb life. Thanks again and hope you have a great day. Dave from West Sussex England
Ray from Australia here, awesome videos. Been watching them for years now. Cool to see a ported 390xp up there with you. My favorite saw. Have a great week👍
Good to see another vid Reg. That 390 sure has a unique sound. love it. The Lord Jesus bless you and keep you safe up there!
Definitely one of the masters of the high canopy!💪
The nibbling away at the last bit of the felling cut to gently reach the point of balance under total control...is brilliant! I love watching this, and the only other climber I can recall do it with such precision & patience is Graeme McMahon. What exalted company the two of you make.
Love seeing the 540 do what it does best . Thanks for sharing it’s been awhile . Hope all is well .😊
Grand fir. Grand Master. Grand video.
Good ye had on the hi-vis, presumably as protection against low flying aircraft. 😆 👍
Reg is back... Missed you my friend .. A pleasure to watch you work. Thank yopu.
Great edit bro, takes you really along the way.
WOW, I would be wore out by the time I got to the first cut !!! So impressive Reg ❤❤ and Thank you 👍👊
Scared the boards off that picnic table!! Great work Reg!!
Thanks for taking the time to film and edit this stuff, I know it must be a lot of work, but I also know we all appreciate the effort.
The music adds a hell of a lot of gravitas to the proceedings as well, well chosen
6:35. The over the shoulder cut is epic!😆🌿🌸
Reg. please post more if you can. Your videos are amazing.
Those traverses with the grappling hook always make my gnads shrivel up. Great video, missed seeing ya.
If only the video can show the adrenaline rush that you have while topping a 200 ft tree It's so hard to explain in a video. You nailed it Brother My adrenaline was with you on this video I needed that. 👊 nice editing
Huge fan of your channel! Your edit's always set the mood.
Nice, easy work🤙 love those open drop zone fir removals👍
Skilled labor.
Wonderful to see another video, Reg! Thanks!
This music adds a truly mystical feeling to your video...Happy St. Patty's Day Reg!
Chunking down that spar was amazing. Much respect man
Great work Reg. Calm and collected as always
Thanks Mate! ... my son has recently gotten into the tree business and I'm sending him this video as inspiration! Best regards and best wishes!
Great to see a new video from you. Just watching you cut that big wood all the way to a slither of hinge always gets my heart racing. Great job as always.
I want to thank you Reg for the grappling hook idea 💡 thank you sir
6:57. I bet you were thinking, “No wonder the back cut was so stubborn, there was a knot right there!”😆🌿🌸
The opening chainsaw buzzes are a call to prayer..Gotta love the cacophony of the saws....
Master of the trade, thanks for sharing big man!
Love it, thank you Reg!
more videos please! Great to watch, no BS
I see you got the new 540 mark 3 I absolutely love it. I have 2 of them they are ported. The power is out of this world.
I actually had to swap it for the mk2 midway through the tree, as it kept bogging down under load. Tried it again the next day and it was OK again
@@RecoatesOutstanding climbing and cutting Sir. I'm hearing the MK III needs ten to fifteen tanks before the electronics dial in the carb. When they wake up they are supposed to be a weapon. I just hope the build quality is better that previous versions, 👍💪🪓🌲🇮🇪
@@Recoates I know you know about this ridge. Did you do the auto tune to it immediately? You let it idle for 3 minutes and then you run it wide, open and run it down a piece of wood and Bury the tip and keep going down for 40 seconds. It helps a lot mind had the same problem once. I did that it was amazing hope that helps buddy
@@br-dj2tiI'll try that. It was fine the next day, but I'll have to wait and see how it runs this week
Awesome! A pleasure to watch your skills.
That looked like a good workout, loads of wood! Didnt see the new climbing device? Any update on that? Nice video mate! 🤠
It's all progressing. Although it's pretty much out of my hands at this stage
@@Recoates Nice to hear the wheels are rollin still!👍 I just have to be patient!😁
G'day Reg, you made that look easy as always. It's a shame about the root rot the logs looked ok though, all the best 👍.
Nice work Reg. I would like to see your method for lowering and swapping out saws. I use a micro pulley and my climb line just curious your method
Similar mate. Micropulley and sling hung off a stub overhead. Had to swap and haul the 572 190ft, so definitely worth planning for.
Fantastic content at the top, and the ambient music really helped to heighten perilous moments up there like traversing between trunks! Do you ever allow yourself a moment to wonder what if something were to fail in the rigging or are you always held by at least two different ropings?
Yes Chis, I make a habit to contemplate the contemplate the what iffs. Deliberately envisaging the worst possible outcome is part a technique that helps keep me focused and disciplined. Kinda morbid, but it's worked so far
Incredible! Thank you for posting!❤❤❤
The background at the start makes it feel like a dream.
We really enjoy the precision cuts, falling in the beneficial landing area.
Nice to see a video Reg. Great job 🫡
Brilliant video
Thanks for posting.
That transition to next tree 😎
Thanks for taking the time to
Thanks for the video
Are you hapoy with the 546? Thanks for the great pictures Reg.
I don't have a 546
You're the man Reg!
Those are some beautiful trees. Good video as always 🪓
BTW that Husky 390 is a BEAST! Never once let me down with a 36” bar. Thats a MAN’s saw😎
Great skill and a massive set of balls!!!!!
Awesome as usual, I hope you are well. Us that a 16 "bar on the mk3 t540? And is there any news on your climbing device?
Yes, 16"bar. The device is now in someone else's hands. That's all I can say about it for now.
Loved that, thanks Reg
Amazing stuff 😮
I know to you this is all old hat, but to most of us we will never get to be in the canopies that you get to call your office, so from us small tree cutters I thank you for taking us on a ride of a lifetime. I know you have been in some tall trees, so I was wondering what was the tallest tree you have taken down and the tallest you have climbed recreationally?
I don't do rec climbing, and it's very difficult to say which was the tallest. The old growth fir I've worked on here are generally between 200-250 ft. There was once a heavy leaner that I did which stood out in my mind because it was way above all the others that I could see in the group. But being up there you are sharply focused on getting the job done safely. Height only factors into your mind depending on how far your line is from the ground for when you inevitably have to swap for a bigger saw
Awesome job buddy, thanks for the video 👌👍
That looked fun!!!
Thanks Reg. Happy Saint Patrick's day!
Amazing job Reg you are a brave soul
Excellent work.
hi Reg, are you face cutting under the higher branches to make them fall slower? so they don't fall like darts quite so quickly.
Trying to fold them in towards the stem, away from the table. I'm sure I answered this already but I don't see it
How long did it take to remove this tree?
love the edit
Good job and interesting edit
Damn Reg. I missed u. 🎉 Love ur climbs, bro. I'm a Ponderosa man.
You make it look so easy lol..great video
Well done cousin
7:45. Nice and flat!🌿🌸
Those chunks were bigger than all the trees I took down last month
Nice work Reg. It must be difficult to climb with a set of nuts that big.
Always a job well done tx for sharing
Enjoyed the video. Nice work up there. A1
That's some war of the worlds style noise in the beginning! Never heard a saw like it.
Nice one Reg 👍
was that a captain hook you used to switch leads?
No, a different one
Can you elaborate on that Reg
@martinevansltd yes, it looks different
does anyone know why he's not using sidecuts on those 20 foot tops he's dropping? I'm sure there's a reason and i'd like to hear it!
I agree,always a good day. How’s your patent coming along?
Sound. Although it's out of my hands now
Your a badass bro love your videos
Nice video 👍
Hey Reg..how did your invention go?
All good. Although It's pretty much out of my hands now
Crazy looking top! Some very fine grain in there! I'd be up there counting the rings xD I can't help it
So good!!
Bravo undermining 2 for 2 would be a good test for the 3002 RC at 200 ft to show its capabilities..
God bless buddy I hope always well could not wait for another video
Awesome bud
Any news on your climbing device?
Yes, but unfortunately I can't disclose because I'm under contract
@@Recoates As expected. As long as it hasn’t been scrapped. I’m looking forward to it being released!
@SR20FTW no not scrapped. There's just been a bit more hassle than expected. But the right people are working on it now
bombs away. Man, some perfect weather. You are a beast bro
Some massive logs there !!
Ol'rait !❤
8:18. I would like to talk to someone that knows for sure the proper angle for the face, depending on the elevation, length of log, etc, to figure out the way to land flat. Obviously you know, but I’m still guessing. Most are good, but I’ve planted a few, to my shame!😆🌿🌸Great stuff!
Assuming it's vertical. The piece you're cutting should be 1/5 of the stem. Deep conventional 45 degree notch a little more than halfway should make it flip and land flat. August gets them flat more by 'feel' and giving a little push upward on the butt as it leaves to get a rotation
Or its mostly a crap shoot! Luck plays a major part🤣🤣
@@peelnationBe like water!
A lot of it is that one fifth ratio if you are free to choose length of logs. From higher in the tree and on smaller wood you can effect the spin a surprising amount by a tap with your hand. Less than 1/5 could use a down slap to the butt to slow the spin, longer pieces a hand under(but not in the undercut!)allowing the tip to get ahead on the rotation.
The most fun you can have with your clothes on
Reg is cutting stuff over a hundred feet up in the air than I cut on the ground here in the east! And that's some very ominous music, quite appropriate for the scale of this tree!
11:49. Awwww.😆🌿🌸
Awesome transfer at H E I G H T - Smooth & no cowboy / tarzan
stuff just Real Life Safe Arborist - Thanks Reg 👍 Professional Business as usual - from Calvin
Woodman at Barrie Ontario Brother 🌄
Slick usual Reg.... though your sub title said 372, it looked like a 572 to me 🤔😝
You are right it is a 572
NICE!
Awesome
Legend