Broken Valve Stem on a Bach Stradivarius Trumpet: How To Remove and Replace It

Поділитися
Вставка
  • Опубліковано 20 гру 2024

КОМЕНТАРІ • 14

  • @WillowsGarden
    @WillowsGarden Рік тому +1

    Good job Art, very tedious work. Have a blessed night!

  • @mr.schwall6144
    @mr.schwall6144 Рік тому

    I’ve used the saw method you demonstrated but have also had a bit of success with modest heat, penetrating oil and using a screw extractor. Thx for your videos - as always very helpful.

    • @TheBrassandWoodwindShop
      @TheBrassandWoodwindShop  Рік тому

      Thank you for mentioning that. It would be good to start with what you mentioned and move to the other method if it is too stuck.

  • @dartme18
    @dartme18 Рік тому +1

    I don't think I've seen a video on your channel for loose tuning slides. I have a loose tuning slide and wondering how to fix it. Excellent content!

    • @TheBrassandWoodwindShop
      @TheBrassandWoodwindShop  Рік тому +1

      I have not done a video on that yet. You can use a tuning slide expander, but you have to be very careful not to expand it too far which is very easy to do.

    • @dartme18
      @dartme18 Рік тому +1

      @@TheBrassandWoodwindShop Maybe I should send my horn to you so you can do a video!! ;-)
      Where can I get a tuning slide expander? I'm very new to instrument repair, and the only tools I have at this point are steel wire, a torch, and solder. None of these seem like the right tool for this job!

    • @TheBrassandWoodwindShop
      @TheBrassandWoodwindShop  Рік тому +1

      If you would like, you can send it to me so I can do a video. Give me a call if you would like to do that and we can work out the details.

  • @carolhenstock8008
    @carolhenstock8008 Рік тому

    Have you ever tried ultrasonic cleaning ? Pj
    Y

  • @tedmcdowell4790
    @tedmcdowell4790 Рік тому

    How about boiling the aluminum out with hydrochloric acid? Would it compromise the integrity of the brass casing?

    • @TheBrassandWoodwindShop
      @TheBrassandWoodwindShop  Рік тому

      I do not know if that would work or not. It may eat away too much of the brass, but I am not sure'

  • @TheeMilesMonk
    @TheeMilesMonk Рік тому

    I have a getzen 700 eterna with a broken valve stem. All I have to do is unscrew it and replace it. However idk if all valve stems are the same size thread. Or will only Getzen valve stems work?? Anybody know?

    • @kellyfowler6615
      @kellyfowler6615 Рік тому +1

      I don't think so. I bought a valve repair kit for my daughter's Getzen 700 and some of the parts, including caps were the wrong size.

  • @Ti_Ti_ta
    @Ti_Ti_ta Рік тому

    Seems like all parts are a long wait right now. Some instrument orders are even worse.

  • @paulgrimm6850
    @paulgrimm6850 Рік тому

    That must be a old horn