This is what Oracle says about it: Establish if the Jeep is US or Export (Canadian) - If Export (Canadian): For compliance, all Canadian vehicles must have factory DRLS. In order for this headlight to work properly, this needs to be disabled. Below are some options on how to proceed: Turn DRL OFF in U-Connect **ONLY APPLICABLE FOR CUSTOMERS IN THE US WITH CANADIAN JEEP** Cover the daylight sensor on the dash - This tricks the Jeep into staying in night mode - Low Beams on at full power Purchase a Tazer or JSCAN (programmer) to disable DRL. NOTE: It's important to re-assure the customer that with the DRL disabled, the vehicle is still in compliance as long as the DRL Halo is connected
The tricky part that took me hours was to adjust the damn beam after I installed them. You need somebody with baby hands to reach in there with the damn Alan key they provide. The left one is not even accessible. Ridiculous design!
Unfortunately no. Check out the Oracle Switchback LED headlights, they fit the JK: www.northridge4x4.com/part/fog-driving-lights/5769-123-oracle-switchback-led-halo-headlights-pair
Great walk through. Nice detail. Appreciate your efforts.
Sweet hope to win that bumblebee jl
That was last years giveaway.
Very well explained!!!
These are awesome!!!
Great tutorial! Love the intro 😆
You earned a follow.
Keep it up
Thanks and Welcome aboard!
Could you guys please make one on the matching fog lights ?
We'll try to set that up for 2022.
do these require a resistor? Or are these true plug and play?
Plug and play!
Can I install these in my 2023 gladiator with halogen lights, no resistors/reprogramming?
Thanks!!
Yes, they are an easy swap that is almost plug-n-play.
Any issues with Canadian Vehicles which have DRL's already wired? Any decoding device needed to eliminate dash error lights??
This is what Oracle says about it:
Establish if the Jeep is US or Export (Canadian) - If Export (Canadian): For compliance, all Canadian vehicles must have factory DRLS. In order for this headlight to work properly, this needs to be disabled. Below are some options on how to proceed:
Turn DRL OFF in U-Connect **ONLY APPLICABLE FOR CUSTOMERS IN THE US WITH CANADIAN JEEP**
Cover the daylight sensor on the dash - This tricks the Jeep into staying in night mode - Low Beams on at full power
Purchase a Tazer or JSCAN (programmer) to disable DRL.
NOTE: It's important to re-assure the customer that with the DRL disabled, the vehicle is still in compliance as long as the DRL Halo is connected
for some unknown reason, the halo is not illuminating, however I am getting illumination from the main bulb.. Any suggestions?
Did you connect the red halo wire to the #52 fuse?
The tricky part that took me hours was to adjust the damn beam after I installed them. You need somebody with baby hands to reach in there with the damn Alan key they provide. The left one is not even accessible. Ridiculous design!
Can they fit the JKU models
Unfortunately no. Check out the Oracle Switchback LED headlights, they fit the JK: www.northridge4x4.com/part/fog-driving-lights/5769-123-oracle-switchback-led-halo-headlights-pair
Sending them back - they fog up al the time. They charge a top dollar - at this price point completely unacceptable.