Jeep JL & Gladiator Install | Oracle Lighting Oculus Bi-LED Headlights
Вставка
- Опубліковано 28 лип 2024
- Matt shows you how to install Oracle Lighting Oculus Bi-LED Headlights on your 2018-2019 Jeep JL Wrangler or 2020 Jeep Gladiator.
Purchase Product Here:
www.cjponyparts.com/oracle-li...
This headlight system made by Oracle Lighting is ideal if you need more than just a new bulb in your Jeep. It uses 3,200 Lumens of illumination to enhance your visibility while driving in any weather condition. It uses less power while providing a higher output of light. It installs using original mounting hardware and features a plug-and-play design with the factory connector without relays or harnesses. However, the halo DRL requires additional power and ground wire for operation. This product (5839-504) contains a tool that helps to adjust beam angle so you can be sure that your Jeep is not shining directly into other drivers’ eyes, especially if your Jeep is lifted. It also utilizes both active and passive cooling methods in order to sustain the lowest LED temperatures possible. It uses remote mounted heat sinks and an internal cooling fan to help ensure a long life for your new LED headlights.
Check out other Oracal lighting solutions from CJ's here:
www.cjponyparts.com/oracle-li...
Subscribe to CJ Off-Road on UA-cam here:
/ cjoffroad
Follow CJ Off-Road on Instagram here:
/ cjoffroad
Music Provided By:
www.epidemicsound.com/ - Авто та транспорт
Product Info:
www.cjponyparts.com/oracle-lighting-headlight-oculus-bi-led-system-jeep-wrangler-jl-2018-2019-gladiator-2020/p/5839504/
Thanks so much for your detailed install. Just finished wiring up the halos. Can't wait for the sun to go down!
If I didn’t already have the factory LEDs for my Sahara, I was totally going to get these. The factory Mopar LED is a really nice light off the lot. Coming from halogen on my CRV I couldn’t be happier.
They look awesome. I would love to see the Oracle fog lights with light ring installed with those.
Thank you for the detailed instructions. Very good installation video
Your video made with too much care, it really helps me a lot. Love it!!!!!!
This video made me buy them, nice work.
They look so good mate, definitely about tint Jeep upgrade the factory lights
Thanks for watching and the kind words!
Matt, hello and HUGE thumbs up on the quality and detail in this video! Just off-the-charts awesome! I just purchased a 2020 JL that has the stock non-LED/Mopar lights and these Oracle Oculus lights are definitely my next purchase. I just had a quick question for you as you arrived at the fuse box. Typically whenever there is any electrical involved my response is always, "I'm out!" :-) and it is off to the dealer. However, after watching you set this up I am going to go for it. My question is around that "butt" connector (the blue thing you crimped) and then what looks like an adapter of some kind for the fuse that will then seat back in to F52/cigar lighter. Are those included in the package when you purchase the lights or were those just parts you had on hand at your shop. If they aren't included, I would love to know the specifics for each so I order the right stuff (again, I am a rookie when it comes to all things electrical!) :-) Thanks again and just an AWESOME video!
Cheers,
Travis
Nice clean install. Sell me those factory LED’s! I need to dress up my jlur!
Haha thanks for watching, if you're interested in buying a set check out our site, we have brand new ones in stock!!
How do the oracle halos match the oem drl’s? In some pictures they appear to have a green hue.
How about the Morimoto Bi-LED headlight?
Did you need to drill into your fuse box and put some silicone? I would imagine you don't want to pinch the wire when you close the lid.
very nice,,, Will this fit the Hummer H2 ?
You didn’t show how to adjust height of the lights. Removing the factory lights also removes the adjustment cog.
It took some searching, but here's the answer: ua-cam.com/video/Gxf7s4b15bY/v-deo.html
Will it work in the European version?
do these have the resister built in for led already? i have the halogens...thanks
Nice video, Matt. I've seen another install video for these on a JL and there was a (very) noticeable hum when the ignition was on ACC. Have you experienced this and if so, how is it resolved? Thanks.
Also would like a reply to this question...
Hello, I bought this headlight bus the conector for the fusi box it goes in F52 is bigger than should be, I have a gladiator 2021, what can do
why does no one ever show the blinker working?
Cool lights.
Thanks for the comment!
do you have a CJ shop that can do install?
Can I upgrade my Jeep Gladiator Overland 2022 to premium LED Lighting group headlights only? please if I can I need a link of the Mopar Led cause I don't find it on the link, thanks.
Oracle make a flare running LED day light and turn signals for the flares?
Will that void the warranty?
No Oculus option fo JK. :(
please need to know how to adjust please make a video about
anyone know how to adjusted
I know this video is super old, But do you need to use a Tazer if you bought a jeep that came with factory Halogen lights?
If I’m going from halogen to the Mopar LED set up is it just unplug the open plug the new one in? Or will I have to run wires also
Would also like to know. Do you need to have the dealer flawed the computer with these? Seem from halogens to led Mopar you do
Any idea if you can hook halos into another fuse? My F52 is already in use with aftermarket heated seats.
What kind aftermarket heated seats u got for the jl/jt??
You can hook it into the seat heater fuse.
Will this work on a Wrangler JL sport? With the DTRL idk if the base wrangler haves a DTRL?
My JT has no drl settings but I run them through the the Jeeps cig lighter and the halos run as drl
Do I need a flash from Jeep? I went from Halogen to LED Oracle My halos are a bit week and a little green.
The green is a reflection from my jeeps gator green color tho. They are very bright at night at 6000k
@@outon2s did you ever need to have your help flashed to get these to run?
@@salttrader4113 Nope plug and play
Paid $475 for em still going strong.
The OEM Factory MopR lights are much much better. Would never downgrade them to aftermarket lower quality lights.
Since I’m currently running the halogen lights, will have any led flicker issues with the swap?
Mine are doing and looking fine so far no flicker coming from halogen. I also have not done a flash yet. Not sure if I have to
Out On 2s picture? Vaghotao@gmail
do they ice up?
As with any LED they will run a bit colder than a standard light, however they will be warm enough to melt most snow and ice.
Looks great
Thanks for watching!
I’m sure in the future the rings becomes switchback
Yeah i would assume so, only time will tell!
I’ll take the factory from you!
Your hands blocked your connect instructions.
There is no beam pattern towards upper right side to illuminate road digns! This is US DOT requirements. Try European lights and you'll see why even these lights are pathetic. Light output is important but so is pattern!!!
I don't understand, help me here. You buy a Jeep JT, you pay 60 PLUS thousand dollars for it, You opt for the factory LED's, the price just jumped some more because not only do you get LED lighting but all the extra do-dads that's in that option on line what ever ! NOW you tell us to ditch the factory units and spend $540.00 MORE for headlights that are ( I must admit are a slight tad better ? ) I hardly doubt them ORACLE'S are worth $ $1,600.00 better !!