Just installed mine yesterday and although there are several videos out there on how to complete, this was by far the best one. She didn't go crazy with the details to leave you confused and gave you just enough info to fill confident. Awesome video.
just swapped my lamps out last month. This is by far the best install vid for these. You included a bunch of small details missed by other vids. Thanks for sharing.
Some feedback. There are two different lengths and thread types for the screws holding the light assembly. You don't cover which screws go where. Not your fault; I lost track of which one goes where... audience, make sure you use one of the short ones for the side light. They don't mention that in this video
Great step by step of how to get at the light and the items needed to be removed furst. Also great comment from a subscriber on how the 23 models differs slightly with the use of some pop rivets. Thanks all
Sarah, Great job on this video! Very clear step by step instructions. Your voice is clear and your are well spoken. It's a little tricky for a first timer. You and this video were my best friend throughout the process. You are smart and and talented teach. Thanks for the help, could not have did it without you. 😊 H
@@505Zombieman there were no error codes, they worked great. I enjoyed my jeep for 1 year then it was totaled. A guy took a stop sign, speeding and no insurance.
Just heads up, install is a little different for '23 year model. There are four plastic rivets on the fender that you will have to pop out and replace, they can not be reused. To get to the side marker light you must remove the bracket, also held in by a rivet. Once out it makes swapping the actual housing a snap.....
Great install video!! I always check out your channel for installs of numerous products before searching other. What side step/sliders are those? And what front mud flaps? Thank you!!
Word of caution. If you have an Overland, this guide is nothing like it. Every single step has been different. Not that this is a bad tutorial...but everything is different on the Overland trim. And it's proving to be extremely difficult. I managed to get the liner off, but you need to replace the rivet clips. Make sure you have those. However now I'm trying to disconnect the light and I'm stuck. I've unscrewed so many things, and the light isn't budging. :(
This is to prevent any hyper flashing or flickering with the LED's. We would recommend to still install this with the turn signals. Thanks for watching!
Also, you didn't mention anything about the green wire plug requirement and left those wires exposed and unplugged in the video. I have a Rubicon, so do I plug it in or leave it unplugged?
Ok. So after trial and error. The yellow wire off the headlights will activate the amber turn signals. My question is if your replacing the halogen headlights with LED headlights. Do you hook up the green wire? Per instructions if hooking up to stock halogens hook up the red wire leave the green wire disconnected. If you have leds hook up red and green wires. So do you hook up the green wire or not.
Have DV8 headlights installed what to know which wires to install amber signal wire to and which color wire is DRL. Want to direct wire white halos to drl instead of fuse box. Wires on new turn signals are white,yellow,green blue and black. On both left and right side lights.
I purchased these and installed them on a 2023 halogen gladiator Rubicon, and I do not get the white DRL's. No clue why... Do I need to get a Tazer to get them to be my "new" DRL's? Help, I can't find any info on this issue. :/
I ordered these from Extreme Terrain and when they arrived the box says 2018 Jeep Wrangler. Do they all say wrangler on the box? Just curious before I start install. Thanks
So your Wrangler has a separate marker light and turn signal on the front of your fenders, right? Not a single bulb that works for both functions? If so - then yes! These will work fine! -Zach
Green and white wires are for if you have factory led lights. In this case only you connect red wire to red and green to red. If u have factory standard lights .then you only use the red wire do not use the green or white.
Shop these Morimoto GEN2 LED Turn Signals! : terrain.jp/3Ho5COy
Just installed mine yesterday and although there are several videos out there on how to complete, this was by far the best one. She didn't go crazy with the details to leave you confused and gave you just enough info to fill confident. Awesome video.
Thank you for watching! - Nick
Thank you for not cranking the background music, excellent video and cool lights. 👍🍻
Thanks a bunch for watching! -Zach
just swapped my lamps out last month. This is by far the best install vid for these. You included a bunch of small details missed by other vids. Thanks for sharing.
Thanks a bunch for watching! We appreciate it! -Zach
Some feedback. There are two different lengths and thread types for the screws holding the light assembly. You don't cover which screws go where. Not your fault; I lost track of which one goes where... audience, make sure you use one of the short ones for the side light. They don't mention that in this video
Great step by step of how to get at the light and the items needed to be removed furst. Also great comment from a subscriber on how the 23 models differs slightly with the use of some pop rivets. Thanks all
Sarah, Great job on this video! Very clear step by step instructions. Your voice is clear and your are well spoken. It's a little tricky for a first timer. You and this video were my best friend throughout the process. You are smart and and talented teach. Thanks for the help, could not have did it without you. 😊 H
Glad it was helpful! Thanks for watching!!
I installed these on my 22 gladiator and it works great. Your video helped. Next a suspension lift. 😊
Thanks for watching! -Zach
Have you got any error codes since installing?
@@505Zombieman there were no error codes, they worked great. I enjoyed my jeep for 1 year then it was totaled. A guy took a stop sign, speeding and no insurance.
Just heads up, install is a little different for '23 year model. There are four plastic rivets on the fender that you will have to pop out and replace, they can not be reused. To get to the side marker light you must remove the bracket, also held in by a rivet. Once out it makes swapping the actual housing a snap.....
Great heads-up, thanks as I have the 23 gladiator. How did you remove the rivets? Where to buy replacements? Special tools? Thanks so much
Great install video!! I always check out your channel for installs of numerous products before searching other. What side step/sliders are those? And what front mud flaps? Thank you!!
This was a customer Jeep, so I'm honestly not sure! Thanks for watching! -Zach
Word of caution. If you have an Overland, this guide is nothing like it. Every single step has been different. Not that this is a bad tutorial...but everything is different on the Overland trim. And it's proving to be extremely difficult. I managed to get the liner off, but you need to replace the rivet clips. Make sure you have those. However now I'm trying to disconnect the light and I'm stuck. I've unscrewed so many things, and the light isn't budging. :(
Also, any video on the full fender removal instead?
What is the purpose of the ballast?
If you have a tazer installed already do you still need to hook that up. Great video. Thanks for your time
This is to prevent any hyper flashing or flickering with the LED's. We would recommend to still install this with the turn signals. Thanks for watching!
Will the installation cause any error codes?
I’m looking to order these for my 2021 gladiator Willys but on the site it’s saying it won’t fit. Is there another version?
Once these are added do you have to deal with the hyper flash issues?
Also, you didn't mention anything about the green wire plug requirement and left those wires exposed and unplugged in the video. I have a Rubicon, so do I plug it in or leave it unplugged?
Ok. So after trial and error. The yellow wire off the headlights will activate the amber turn signals.
My question is if your replacing the halogen headlights with LED headlights. Do you hook up the green wire? Per instructions if hooking up to stock halogens hook up the red wire leave the green wire disconnected. If you have leds hook up red and green wires. So do you hook up the green wire or not.
Have DV8 headlights installed what to know which wires to install amber signal wire to and which color wire is DRL. Want to direct wire white halos to drl instead of fuse box. Wires on new turn signals are white,yellow,green blue and black. On both left and right side lights.
I’m about to order these… but I can’t find if the computer need to be flashed to not cause error in the dash. Any help?
jeep wrangler 2022 unlimited willys
would the turn signals do on this model if ?
I purchased these and installed them on a 2023 halogen gladiator Rubicon, and I do not get the white DRL's. No clue why... Do I need to get a Tazer to get them to be my "new" DRL's?
Help, I can't find any info on this issue. :/
You shouldn't need a Tazer for the white DRL to come on. Give our tech guys a call and we can help you trouble shoot the issue. 1-877-870-8556
Son compatibles con jeep jl 2022
Will this work for JLU Willy’s ?
I ordered these from Extreme Terrain and when they arrived the box says 2018 Jeep Wrangler. Do they all say wrangler on the box? Just curious before I start install. Thanks
It likely will say Wrangler on the box since fitment is the same for lights like these! I wouldn't worry too much about it! -Zach
Will these work on the non-sport Willys edition? For example, mine is a Willys not a Willys "Sport". Thank you.
So your Wrangler has a separate marker light and turn signal on the front of your fenders, right? Not a single bulb that works for both functions? If so - then yes! These will work fine! -Zach
Question did these throw any sort of error code?
These shouldn't throw any error codes!
Do you do anything with the green wire?
Green and white wires are for if you have factory led lights. In this case only you connect red wire to red and green to red. If u have factory standard lights .then you only use the red wire do not use the green or white.
NOTHING FOR A JEEP GLADIATOR WILLYS SPORT ? DAMN !!!!!!
Aliexpress !!!!👎
Morimoto and Aliexpress are two different worlds when it comes to quality, I can assure you that. -Zach
Good video but those side markers do not just pop out that easy. That is BS .