FMS - Futura - 64mm - Unbox, Build, & Radio Setup
Вставка
- Опубліковано 6 вер 2023
- bprc.me/FMS_Futura
bprc.me/4S_2200
bprc.me/AR630 | bprc.me/AR631
bprc.me/NX10
Help Us
www.BrianPhillipsRC.com
bprc.me/Patreon
bprc.me/PayPal - brianphillipsrc@gmail.com
bprc.me/UA-camMembership
bprc.me/HorizonHobby
bprc.me/HorizonHobbyEU
bprc.me/TowerHobbies
bprc.me/ArrowsRC
bprc.me/BitgoHobby
bprc.me/FMS
bprc.me/FMSCanada
bprc.me/AMainHobbies
bprc.me/Banggood
bprc.me/Amazon
bprc.me/BuddyRC
bprc.me/Redcat
bprc.me/RTLFasteners
bprc.me/RCGoing
bprc.me/FairRC
bprc.me/TopRC
bprc.me/Creality
bprc.me/Titan
bprc.me/EBike
bprc.me/Furniture
bprc.me/Clothing
bprc.me/Solar
TX & RX
bprc.me/Tx
bprc.me/Rx
bprc.me/AR631
bprc.me/AR637T
bprc.me/AR8360T
bprc.me/LemonRX | amzn.to/34Zehs9
bprc.me/A3LRX | amzn.to/3yX2Mww
bprc.me/SkyID
SMART
bprc.me/SmartCharger
bprc.me/SmartBattery
GLUE | CA | KICKER | FOAM2FOAM | SUPPLIES
www.brianphillipsrc.com/supplies
bprc.me/FMS_Glue
bprc.me/VoltageAlarm
bprc.me/Servo
bprc.me/Forceps
bprc.me/LED_Kit
bprc.me/Iron
bprc.me/Mics
HORIZON
bprc.me/RealFlight
bprc.me/PlaneStand
bprc.me/150FX
bprc.me/150S
bprc.me/230S
bprc.me/330S
bprc.me/Fusion360
bprc.me/InFusion180
bprc.me/A10
bprc.me/AeroScout
bprc.me/AirTractor
bprc.me/Apprentice
bprc.me/Beechcraft
bprc.me/CarbonCubS2
bprc.me/CZ_Cessna150
bprc.me/CZ_Cub
bprc.me/Cherokee
bprc.me/CirrusSR22T
bprc.me/CitationLongitude
bprc.me/Commander
bprc.me/Conscendo
bprc.me/Draco
bprc.me/Duet
bprc.me/EC1500
bprc.me/Eratix
bprc.me/Extra300
bprc.me/F14
bprc.me/F15
bprc.me/F16
bprc.me/F18
bprc.me/F4U_Corsair
bprc.me/Fw190
bprc.me/Habu
bprc.me/Maule
bprc.me/Opterra
bprc.me/P39
bprc.me/P47
bprc.me/P51
bprc.me/PT19
bprc.me/Pitts
bprc.me/Radian
bprc.me/RV7
bprc.me/SportCub
bprc.me/SR71
bprc.me/SU30
bprc.me/T28
bprc.me/Timber
bprc.me/TwinOtter
bprc.me/Ultimate3D
bprc.me/UltraStick
bprc.me/Ultrix
bprc.me/V900
bprc.me/V1200
bprc.me/Valiant
bprc.me/Vapor
bprc.me/Viper
FMS
bprc.me/FMS_A10
bprc.me/FMS_ASW17 | bprc.me/HH_FMS_ASW17
bprc.me/FMS_Avanti
bprc.me/FMS_BAE_Hawk
bprc.me/FMS_Beaver | bprc.me/HH_FMS_Beaver
bprc.me/FMS_EasyTrainer
bprc.me/FMS_F15
bprc.me/FMS_F4U_Corsair | bprc.me/HH_FMS_F4U_Corsair
bprc.me/FMS_Flash
bprc.me/FMS_Fox | bprc.me/HH_FMS_Fox
bprc.me/FMS_Futura
bprc.me/FMS_Maule
bprc.me/FMS_Moa | bprc.me/HH_FMS_Moa
bprc.me/FMS_P39
bprc.me/FMS_P40
bprc.me/FMS_P47
bprc.me/FMS_P51
bprc.me/FMS_PA18
bprc.me/FMS_PC21_Pilatus | bprc.me/HH_FMS_PC21_Pilatus
bprc.me/FMS_Pitts | bprc.me/Pitts
bprc.me/FMS_Rafale | bprc.me/HH_FMS_Rafale
bprc.me/FMS_Ranger | bprc.me/HH_FMS_Ranger
bprc.me/FMS_SkyTrainer | bprc.me/HH_FMS_SkyTrainer
bprc.me/FMS_SU27_J11
bprc.me/FMS_T28
bprc.me/FMS_Viper
bprc.me/FMS_Yak130 | bprc.me/HH_FMS_Yak130
bprc.me/FMS_Zero
TOWER
bprc.me/TH_ASW28
OMP
bprc.me/OMP_Bushmaster
bprc.me/OMP_Challenger
ARROWS | HOBBY ZONE www.brianphillipsrc.com/arrowsrc
DANCING WINGS | DYNAM | XFLY www.brianphillipsrc.com/bitgo
E110 bit.ly/3yVniit
E120 bit.ly/3OOmlOi
E150 bit.ly/3vHM7Le
E160 bit.ly/2DXmEGU
E180 bit.ly/30RKwE8
E200 bit.ly/3RemwEd
K123 amzn.to/2EerkpG | bit.ly/3PKg5r6
K124 amzn.to/3bqGF9F | bit.ly/34BaZXP
FW200 bit.ly/3LVXu9Q
VTOL amzn.to/2zwNvaV | bit.ly/2TTq4Qn
ASW28 amzn.to/3A8D5bS | bit.ly/2VlLtBm
Phoenix Evo amzn.to/3nX4okg
Spitfire bit.ly/3smaEWE
BF109 bit.ly/3rlrUen
T28 bit.ly/3398xse
F4U bit.ly/3h3OhNI
P40 bit.ly/3OTlUSK
P47 bit.ly/30hZiqN
P51 bit.ly/2JQDtDj
F22 bit.ly/39Zvf6r
F16 bit.ly/2YTmTKg
F16 50mm bit.ly/3Kga0Av
F18 50mm bit.ly/3mm9xSY
#rc #airplane #futura
It’s funny, no matter how many planes I have set up, I still always watch your set up start to finish, lol. Always learning from you. Good stuff, thank you, Brian!
One suggestion: BD Tennessee shows how setting up your own category for your callouts can keep you from scrolling through 200 voice commands and quickly get to the ones that you use. It doesn't erase anything it just create a new folder.
Just got through watching your flight video for this 64, & was SO looking forward to this one. I needed this content & your links, because this Futura is the current frontrunner in my next Jet purchase. Many thanks!
Glad it was helpful! We hope you love yours!
bprc.me/FMS_Futura
😊I received mine today with the exact same damage to the wing. The landing gear under the wing is poking through. I have contacted FMS thanks for your video!
Opened mine for Christmas - same damage to wing
Once again, thank you so much for the radio set up. Very beneficial even if I don't have that particular plane. I do have that particular receiver or (transceiver). 😊
So happy that I was able to order this! Can’t wait to receive it! My first intention was to buy it as a beater to practice so that I don’t mess up my viper. I am completely new to flying, and to jets, and I have only flown my viper five times and luckily, 4 landings were butter! but the 5th one popped a rear landing gear out of place. So got this beater to preserve my viper but the more I see this plane the more I think I’m going to care for it and love it as much as the viper! 😂 I don’t know how to stop buying planes! This is number 30 in the six months that I’ve been flying! 😵💫😵💫😵💫 and now I want a Sopwith Camel! What the …..
I’ve been waiting for this one! Definitely gonna buy it
Bought the same model as the one in your build and it came with no damage. 👍
Thank you for the detailed setup, it was very helpful and educational. If I may make a suggestion, when you are showing the radio setup it would be very helpful if as you operated the various buttons on the NX10 you would call them out. I had to replay numerous sections of the set-up portion of your video as I tried to guess which buttons you were pushing. Keep up the great videos, they are very helpful.
Thanks for the tip! I can try to do better. Only issue we've had in the past is that we try HARD (I know it doesn't always show) to strike a balance between going REALLY slow to help newer pilots, and just BLASTING through. I can do this setup in maybe 4-6 minutes off camera...all the way through...but we do slow down considerably. The key call out might be something to try and see if I can make it work.
Thanks again, and glad you're here with us!
FMS should offer touch-up paint for all their models. Just saying it would make it nice 👍
Awesome Bri!!
thanks!
Your wyfe's Megan's pretty lavendar color nail polish!😍😉
I clicked on your video cause I like the banana hanger! 😂 And the ambiguous remarks that you frequently make!😂
You gotta see this video then - ua-cam.com/video/JrTqCSRRpsg/v-deo.html (toward the end - YOU GOTTA WATCH )
Like it. But... I'm saving up for the Beechcraft D18.
Maybe next Christmas I'll be into the EDF's. And this little bad boy looks like a good first for the EDF section of my meager-but-eager hangar 👍
PS-Nice nails, Camera Crew!!
D18 - yes - good call! bprc.me/Beechcraft
OMG.... what an absolute beauty!!
Who cares that there are dings in the wing... a nice notch in the rudder that doesn't even bother to conceal the rudder servo lead. Or that it has fixed gear or only 3 minutes flying time. Awesome specs, hey?? 🤣🤣
Mate, you better grab one before they're all gone!! God only knows that we can go without that $300 Australian dollars we were going to spend on food because this aeroplane is definitely much more important than food!
Just be careful you don't blow on it because it's even more fragile than the foam box it came in!!
Some interesting points ;) LOL!!!
Hi Brian, thank you so much for the detailed setup video. It really helped me a lot while setting up my plane! I love your videos and watch almost all of your videos frequently. Thank you for making getting into RC hobby so much fun. :)
Additionally, Is there any way you could share your transmitter and receiver profiles? Can I use bank angle limits for beginner mode from a Habu STS 70mm?
Looks amazing! It is cool not to be a one man band. So useful to have a second set of eyes 👀 to see if cables are gonna get pinched! Thrust reverse heck yes! What a bird! Can’t wait to see you fly! #stayepic
Hey Brian Thanks for another good video, have you updated your radio to the new version, or have I missed it in one of your videos 😊😊
Any reason why one couldn’t put a Reflex v2 in this plane. I run Futaba gear and do not have an option of having a receiver with stabilization in it ?
NIIIIICE 👌🏻
It's a bit more complicated but I saw West Hobbies RC (primarily does helis) create a shelf to mount the gyro above the wood board.
cool!
hey brain...what do you mean...can i install a 70mm edf on ´6S Lipo 4500maH? Thx
Hey Bri, I just got my 64mm Futura in the mail and mine had 2 holes in the wing from the battery compartment latch as well. I wonder if they have been made aware of this aside from your video. I wish I could get them to send me a replacement wing since it was a packaging dept error and I wonder how many others received theirs this way. Many would say "oh who cares its an under $200 rc PNP" but to many these days thats still not pennies. Plus, no matter how much you pay for a plane it should never arrive damaged. So I wanted to see if you happen to have a direct email for someone within FMS manufacturing to send pics too of what they sent out. If more and more of us say something then maybe the next guys wont have to buy a brand new rc model that COMES with damage from the factory. 😕 Again, yes I know its a less expensive model, but no matter the model you should never receive a brand new model that is damaged before you even get to fly it. Esthetics or not. Let me know if they reached out to you about it and if they care to do anything for what I am assuming will be a ton of rc hobbyists buying a 64mm Futura that is damaged already.
About to pull the trigger on this one. Do you think if ESC is upgraded to 60A, it can handle 5S? I fly mostly scale (55% throttle) but like to do 1 or 2 passes at full throttle. Will 5S be a problem in those short passes?
Brian, time to build a barn for the planes.
60'X80'X20' at the end of the dam, it'll act as the dam gift shop ;)
As for timing, we gotta get the pond done, or at least started, and some of the "refuse" dirt/clay will be used to start that pad, OR it will go straight up to the FULL SCALE STRIP...which is kinda the "next" large capital project. Roads, and approaches in front of such buildings will be critical, so that'll also be on the agenda, and will significantly increase the cost component of the dam gift shop, but it will be much easier to maintain, and look nicer, AND be another runway. The Heli Pad will happen at the same time, as well as extending the runway to meet it.
It's gonna be epic, but also crazy expensive, and hope the UA-cam channel can start picking up the pace, in terms of growth, so we can get this stuff "in budget" - LOL LOL LOL ;)
@@BrianPhillipsRC bad ass!! We can do it!
Can a 4s 3200mah be used for this bird without causing a damage to the ESC?
This planes manual shows how to change values in the ESC. Have you ever tried changing the motor timing in the ESC to get more speed as it shows in the planes manual?
"More speed" from timing??? Yeahhhh, not sure I buy it. Ever hear an ESC "FART" - that's what you'll get.
Brian I bought one of these as well as the 80mm. On the 64mm I went ahead and also bought a Reflex to put in it but wonder if I will need it ? I will be using a AR630 for a receiver and a NX10 transmitter so would I gain anything by using a reflex ?
Reflex would only be needed if you wanted to use an AR620, since the AR630 HAS AS3X and SAFE...
You can keep her for another plane, if you wish...they CAN be reprogrammed, fyi.
@@BrianPhillipsRC Brian thank you for your fast response. Looks like I’ll be saving for another plane. Love your UA-cam vids I learn a lot and be sure to thank your camera crew 😁😁👍❤️
BRIAN THANKS FOR EVERYTHING I'M WORKING ON MY CORNHOLES
Ebay HAS TOUCH UP PAINT FOR FMS AND E-FLITE PLANES. TAKE A LOOK
HAPPY FLYING. 😂
I will check it out, good luck with the cornholes ;)
do you have a video on the F/A-18 Super Hornet, I don't find it
It's coming soon! We've had TERRIBLE weather and didn't get a chance to fly it yet, but stay tuned!
Last week, after a long wait, I bought 2 of these from Turbines-RC, one for my son and one for myself as we like to fly in formation. Unfortunately both models suffered from ESC malfunction. After less than 2 minutes of flying the ESC goes into emergency mode, leaving just the servos working for an emergency landing. The cause is that the ESC is 40Amp while the motor draws 48Amp. We are very very disappointed considering the fact that for a 64mm EDF is very expensive, being more than Eur 80 dearer than the Motion RC Banshee. This also leaves me thinking that FMS does not test their electronics. Sadly I DO NOT recommend this model.
Do you think there is enough room in there to shoe horn a 70mm fan
in there?
Not sure...but I bet if you wanted too, you could do it!
Sir . Don’t you do for motionRC.. ?? Just got my banshee o done all assemblies but not radio settings 😢😢😢 pliz need help..😢will you 😅😅
We've tried for years, and even worked with Wes to try to see if we could get something to work, but their "management" just don't need anything from us...ask and they'll let you know ;)
@@BrianPhillipsRC that’s bit weird..!! I do always follow you Brian you both so good.. lil pinpoint info I get from you.. I don’t know why motionrc.. is bit arsy to you ..
Could I use this settings for 64 mm banshee …? Brian .. or which of your radio settings video help me for banshee .. 😢thanks
Hey Brian it’s me Ryan I’m the guy that emailed you about the 737. I was just wondering if I could use an ar630 since it’s cheaper or do I have to use ar631
AR630 is only about $5 less - you probably want the ANTENNA, since it's a bigger and faster plane.
Without AS3X/SAFE...
bprc.me/AR410
bprc.me/AR620
bprc.me/AR6610T
bprc.me/AR8020T
With AS3X & SAFE...
bprc.me/AR630
bprc.me/AR631
@@BrianPhillipsRC Ok I’ll go with the one you recommend thanks!
Also I’m having a hard time understanding all the terms that you used like gains and expo for the as3x process if you wouldn’t mind could you tell me a definition of what they mean
Your wife must be the most understanding woman on the face of the earth looking at your living room and watching all your vids I know you have a ton more if I leave a model out I get in crap then it moves into the "how much did you pay for that?" and there isn't a safe answer to that question believe me 😂
LOL - yeah, I'm pretty lucky. I do get the stank eye when I carry one from the kitchen into the living room ;) BUT we don't have room in the basement - LOL LOL LOL - good problem to have, right??!?!
@@BrianPhillipsRC yup as far as problems go it's one of the better ones lol
Where are your kids when you make your videos?