How to Replace Front Wheel Bearing & Hub Kit 2007-2011 Toyota Camry

Поділитися
Вставка
  • Опубліковано 9 січ 2024
  • Buy Now!
    New Wheel Bearing & Hub Kit from 1AAuto.com 1aau.to/ib/1ASHF00703
    This video shows you how to install a new front wheel bearing & hub kit from TRQ on your 2007-2011 Toyota Camry. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
    This repair was done on a 2007 Toyota Camry SE 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
    2007 Toyota Camry
    2008 Toyota Camry
    2009 Toyota Camry
    2010 Toyota Camry
    2011 Toyota Camry
    Tools you will need:
    • Pry Bar 1aau.to/o3z/1AXAA00020
    • 17mm Wrench 1aau.to/o6t/1AXAA00010
    • 22mm Wrench
    • 10mm Socket 1aau.to/obtY/1AXAA00017
    • 12mm Socket 1aau.to/obQt/1AXAA00015
    • 17mm Socket 1aau.to/obQt/1AXAA00015
    • 19mm Socket 1aau.to/oava/1AXAA00043
    • 21mm Socket 1aau.to/oava/1AXAA00043
    • 22mm Socket 1aau.to/oqM/1AXAA00266
    • 30mm 12-Point Socket 1aau.to/oai/1AAST00002
    • Brake Caliper Hanger 1aau.to/okV/1AXAA00439
    • Press
    • Snap Ring Pliers
    • Wire Cutters
    • T30 Bit
    • Ratchet 1aau.to/obTE/1AXAA00016
    • Socket Extensions 1aau.to/obQt/1AXAA00015
    • Torque Wrench 1aau.to/oaWZ/1AXAA00044
    • Drill Bit Set
    • Gloves 1aau.to/oaE4/1AXSS00048
    • Safety Glasses
    • Floor Jack 1aau.to/oamc/1AXAA00068
    • Hammer
    • Jack Stands 1aau.to/o88/1AXAA00065
    • Punch
    • Wheel Chocks
    Subscribe: / @trq
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
  • Авто та транспорт

КОМЕНТАРІ • 3

  • @TRQ
    @TRQ  6 місяців тому

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @nofuxgvn
    @nofuxgvn Місяць тому +5

    “Set up in the press”. Yep, nope. I’m out.

  • @johnmcote
    @johnmcote 3 місяці тому

    Damn, you know this is a job with that many cutaways! 😮😬