I'll try this method to revive my kitchen cabinet edge band with the original one falling off lol. let me know if that a good idea or should I get a different edge band.
The problem in using acetone or kerosene for excess cement adhesive is that the liquid sometimes goes in the edge bond and eventaully loosen the bond of edging. Pero yung technic in sanding excess edges before trimming is good idea. Yun lang medyo bagay if manually trimmed.
I agree with you sir about the acetone or kerosene. That's why utmost care should be practiced along the edges to prevent acetone from reaching the bond of edging.
Nagkakaproblema po ako sa mga kantuhan bumubuka yung PVC edging unlike yung sa maninipis na edging sumusunod lang sa plywood. Any idea po kung anong magandang gawin para di bumuka
Di ko pa po natry ang rubber cement pang laminate. Pero based dito sa nakita kong link mukhang hindi po pwede. www.google.com/amp/s/www.instructables.com/Rubber-Cement-and-Contact-Cement/%3famp_page=true
Hi Muhammad! That's also my problem when using brush in applying adhesive. That's why I now use scrap laminates when applying contact cement so that I can dispose it afterwards.
Hi! Please check my FB page. May ginawa po akong bill of materials ng bawat project. facebook.com/pinoywoodworker/photos/a.192085582228601/192694452167714/?type=3
That is so not the way to do bruv. It will take forever to do that not to mention destroy the face finish with your knife and sand paper. That’s life wasting unnecessary graft.
This so IS the way to do it...bruv. How on earth can the sandpaper and knife destroy the face finish when neither tool even touches the faces? LMAO at your inane comment and your appalling English. And it speaks volumes that you didn't offer YOUR method. ;-)
Nice to see good manual skill in preference to throwing money at fancy tools. Well done!
great care taken so as not to hurt the matreial! the right way to do it manually to! thumbs up!
I dont hv that yellow tool, can i just use sand paper instead?
I'll try this method to revive my kitchen cabinet edge band with the original one falling off lol. let me know if that a good idea or should I get a different edge band.
what about 45 degrees?
that is so neat!
sir ano ang pantanggal mo sa mga sumablay na rugby
I m making kitchen wardrobe, do I need to laminate after joint all frame ?
No, before. Only do visible sides
The problem in using acetone or kerosene for excess cement adhesive is that the liquid sometimes goes in the edge bond and eventaully loosen the bond of edging. Pero yung technic in sanding excess edges before trimming is good idea. Yun lang medyo bagay if manually trimmed.
I agree with you sir about the acetone or kerosene. That's why utmost care should be practiced along the edges to prevent acetone from reaching the bond of edging.
Nagkakaproblema po ako sa mga kantuhan bumubuka yung PVC edging unlike yung sa maninipis na edging sumusunod lang sa plywood. Any idea po kung anong magandang gawin para di bumuka
Sir which is better when it comes to quality? Buy a laminated marine board or I'll be the one to laminate the board?
I prefer using boards that are already laminated, since theyre factory-made with machines.
There are specific trimmers for the edge band. The process becomes much quicker, and you will get neat rounded edges.
pls indicate the contact cement or glue that is best for this
You can choose between Pioneer or Unica brand contact cement.
Laminate scratches kaise mitaye ? Aapan tari kese , please guide
Thanks for the tutorial Sir, pwede po ba mag laminate isang side lang ng plywood?
Pwede naman po.
Ano po ba dapat mauna sir, pocket hole at hole for hinges or laminate po muna?
Pwede kahit saan po mauna. Pero para sa akin mas malinis kung laminate muna.
Pwede po ba ang rubber cement pang laminate instead of contact cement?
Di ko pa po natry ang rubber cement pang laminate. Pero based dito sa nakita kong link mukhang hindi po pwede.
www.google.com/amp/s/www.instructables.com/Rubber-Cement-and-Contact-Cement/%3famp_page=true
@@AnvinArganosa thaks po.
The adhesive dries very fast, what do u do to keep the brush free from drying?
Hi Muhammad! That's also my problem when using brush in applying adhesive. That's why I now use scrap laminates when applying contact cement so that I can dispose it afterwards.
try to wrap it in a plastic bag, no air - no drying.
Very helpful !!!
Thank you!
Hi thanks for this video, what are best option kapag nagasgas yung laminate while applying adge banding?
Cement name?
Pioneer or Unica brand.
Boss. Thanks sa info. Tanong ko lamg, di ba pwd ang HPL ang e edge bonding? SAlamat
Pwede naman po. Visible nga lang yung itim ng hpl sa mga kanto.
@@AnvinArganosa thank you po ulit.
Pwede, magiging visible yung itim na side ng hpl. Ang ginagawa ko, touch up ko ng paint marker of the same color as the hpl
Anong klasing contact cement ginamit mo boss?
Pioneer ang brand po. All purpose contact cement.
Naka magkano po kaya yung Contact Cement tsaka yung mga pang laminate po? Edging tsaka mismon surface ng plywood.
Hi! Please check my FB page. May ginawa po akong bill of materials ng bawat project. facebook.com/pinoywoodworker/photos/a.192085582228601/192694452167714/?type=3
That is so not the way to do bruv. It will take forever to do that not to mention destroy the face finish with your knife and sand paper. That’s life wasting unnecessary graft.
This so IS the way to do it...bruv. How on earth can the sandpaper and knife destroy the face finish when neither tool even touches the faces? LMAO at your inane comment and your appalling English.
And it speaks volumes that you didn't offer YOUR method. ;-)
Good day sir. Anong router bit dapat gamitin pang trim ng mga excess laminate or edge banding?
Flush trim bit po.
What a mess, why is there so much cement to remove with acetone if you were using a blade?
Its the glue. Excessive glue will splill out
Useless idea and wastage of time