Це відео не доступне.
Перепрошуємо.
How to install Non-Integrated Tail light on a 07-12 Honda CBR600RR by TST Industries
Вставка
- Опубліковано 20 кві 2015
- Eliminate the stock fender and move your tail light into the tail and signals onto the subframe using components from TST Industries. For more info please see: tstindustries.c...
Make sure to subscribe here: bit.ly/1jq2ZrN
Follow us on Facebook here: on. 1nuTjlF
Follow us on Instagram here: / tstindustries
Follow us on Twitter here: / tstindustries
The TST Industries taillight is available in a choice of clear or smoked lens. You can remove the fender mounted OEM tail lamp and signals, and move all the lighting to a location that will make your bike look sleek and sexy. The capsule geometry fits perfectly within the tail fairing, and a little trimming of the subtray is required to assemble the system onto the bike. The optional pod signal kit screws to the subframe and plugs right in.
This is our own design, a product of American engineering, and is sold only through our stores and a few authorized dealers. Super Street Bike magazine featured the integrated version of this product in their "Mod of the Month" article in April 2012. If you want to see the integrated version installation video you can find it in the Honda category of our UA-cam channel.
Great Video. TST Industries does a fantastic job with after market parts - they are real pros. Bart is not only a great installer he is also a fantastic rider. I have purchased the complete rear end kit for the 2021 Yamaha R3 and every part was top notch and spot on - everything lined up perfect and all I had to do was to follow Bart's install videos. I'm a big fan of Bart and TST Industries. This is the first place I come looking for mods for my bikes. I love there integrated tail light offerings.
is there no way to fit these without cutting the tail? also, would the brake lights still work fine without plugging the indicators? I feel better keeping the signals outside of the tail light.
Unfortunately our tail light will require the cutting of the subtray during installation. You can use our tail light without the signals by simply leaving them unplugged or you can take a look at our non-integrated in-tail tail light which can be found at the link below. Same style, fit, and function but without the signals built-in.
tstindustries.com/TST-LED-Non-Integrated-Tail-Light-Honda-CBR600RR-2007-2012.html
Isnt bad if you dont reuse the heat shield?
Nice work. I would like to order this parts but I will need the plate light, it's required from my province for inspection.
We do offer a license plate light that works with our systems well. Yje videos we make focus on the installation of the part that the video is about. The license plate light has its own separate video
Hi there,I would like to order this taillight but it seems that you guys don't ship to singapore. Is there a way to get this from you guys ? Would really appreciate if i could get my hands on this. Thank you !
@TSTindustries Can u reuse the Oem Turn Signals with your Brackets? I would like to reuse stock turn signals since they stick out to the sides a little more
+mikeyeyes7 OEM signals have a vastly different mounting mechanism and cannot be mounted on our Pod Signal Mounting Kit.
Question
Are the wires in any risk of melting or otherwise deforming in the long run as the heat shield is eliminated?
Not at all.
Hes lying
Is it possible to install integrated tailights WITH the pod signals?
Yes but that is not a plug and play configuration so you will have to wire taillight signal positive in parallel with pod signal positive.
Would be nice if there were brackets to install these below the seat. really hate when signals stick out of bike's body
Have you seen our Integrated Tail light? You can check out our install video below and see if that product will solve your issue.
ua-cam.com/video/mAXPunV_UxU/v-deo.html
I did. Cops are picky in Northern Virginia and I don't want them to draw unnecessary attention. I was thinking of putting the plate( w/ minimum bend) and signals under the seat, away from the rear end of the bike.
If you are going to put the signals under the tail then you are probably just as likely to get cops' attention as with an integrated taillight. Best we can do for you at the moment is this tstindustries.com/TST-LED-Rear-Signal-Kit-Honda-03-16-CBR600RR-04-07-CBR1000RR.html
Hi, do anyone knows if these accesories are legal in europe????
DOT laws vary from location to location. It is up to you to verify the legality of any aftermarket part in your state before making your purchase.
Nice signals, do these fit a 2013 ?
These will in fact fit the 2013: tstindustries.com/TST-LED-Rear-Signal-Kit-Honda-03-16-CBR600RR-04-07-CBR1000RR.html
Looks like a good product but has a few flaws. First one is removal of the heat shield. Don't plan on storing any thing in the trunk compartment. It will more than likely melt on a longer ride and don't plan on having a passenger on the bike. They will get really hot unless you put something there to deflect the heat. Second the tag mount. Definitely figure out something else unless you like getting harassed by the cops every time you ride because it will happen. That is not a proper mount and there is no light for the tag. You will get pulled over because they can't read your tag. Third don't use electrical tape like he shows. Do it right the first time and use heat shrink
The only thing that will melt in the trunk is chocolate.
I need one of these for my bike.
Rizzle Universe What's on there now?
I have the Hyperflo Taillight now.
Well, we have plenty in stock anytime you are ready
That license plate mount is just awful, man. You guys fudged that, I wish it came down more square under the indicators
Everyone's entitled to their own opinion and we respect it. This is probably our second most sold fender eliminator of all-time.
ordered this then found out its NOT DOT APPROVED ..........nice scam you guys are running here
Not a scam at all. There's disclaimers all over our website regarding this. You can always file a return request to return it.
@@TSTindustries hidden small print disclaimers .....REALLY? have you no shame? if that were CLEARLY posted ANYWHERE i wouldnt have ordered from you to begin with
@@somefxckingjerk4261 not hidden by any means, it's in the description of the product. If you're unhappy with it, you can absolutely file a return request. It's not DOT-approved because we haven't paid a government agency to put a stamp of approval on it.