Hey Mike ,John here,hey I had problem with my LQ400 - kept stalling,chased stuff , finally I took intake manifold off with carb ,cleaned carb "found lil crap in it! Reinstalled then took a crap again- took apart- and what I noticed was the shut off valve inside carb was staying shut I figured,so I applied 12v to it and wouldn't move- I ohms solenoid and was at 0 , so I said screw it - I took solenoid off and pulled the pointed magnetic rod off and screwed rest of solenoid back in and then she fired up after I primed carb - but when the problem occured is when i turned the light on and i think somewhere it may have shorted solenoid???? Thing didn't come with any manual what so ever- soo,hope this helps ,got unit from Govplanet
@johncunningham2259 I've definitely read various complaints about the crazy wiring and in some cases what appears to be excess wiring. I hate electrical gremlins. Mine has been fine on that end. Hopefully someone reading your comment will chime in. That solenoid issue is the 1st I've heard of. I try to scour videos for info but your issue is new. I'll keep looking.
It would be nice to see you build the pump track with the mini skid. I'm thinking about picking one up to help around the BMX track that I help run in Vegas. It seems like it would be a little weird going over the jumps with the mini skid steer.
@JoeMofknDot It is definitely short 'wheelbase', if you will, machine. Depending on the height of the rollers and the gaps (peaks and valleys) it could be a good thing. The way the controls are it will be a challenge to try to back drag it. I anticipate moving the bulk of materials with it, yet still doing a lot of flat shovel, rake and plate compactor work.
At 4:10 you have a wrong statement. The diggit 850 have the same controls as the unit you are running. I own a 2023 and a 2024 diggit 850. The 2022 diggit 850 was yellow with yellow arms and used pilot controls. They are unusable and should be avoided
@Sandbridgeman1 Any of the 12mmx1.5 drain hoses on Amazon will fit. I used the valve in the link. Then I added a hose with a removable plug. Pain though. Had to unbolt motor and raise it so I could thread in the valve. The hose versions just thread in.
Have you seen anything on the size or part # on your tracks? I can't find anything on my 2023 LRT23 tracks but the best I've come up with is they may be 180x37x41?? mine has major splits from coming off several times after rocks get in there and derail them. thats when i realized if the track breaks you will be dead in the water without a replacement.
@jamesstanley5503 I had 1 reply and say size 180x73x37, but I only found 180x72x37. I didn't know how the sizing broke down. Appears to be 180mm widthx72degree lug pitchx37 cog teeth. Try TrackLoaderParts.com
@jamesstanley5503 Sorry that took a while. Only 1 reply out of 3 inquiries sent. Let me know if it helps and what you go with. I should probably save up for a backup set.
@@kyledall957 I do not. On one of "The J Bro's" videos, they bought new tracks, but theirs is the triangulated, high drive motor style. The track source may be in their video description.
Enjoy the video very detailed keep them coming
Big thx for no music. I want to hear the mini skid
Hey Mike ,John here,hey I had problem with my LQ400 - kept stalling,chased stuff , finally I took intake manifold off with carb ,cleaned carb "found lil crap in it! Reinstalled then took a crap again- took apart- and what I noticed was the shut off valve inside carb was staying shut I figured,so I applied 12v to it and wouldn't move- I ohms solenoid and was at 0 , so I said screw it - I took solenoid off and pulled the pointed magnetic rod off and screwed rest of solenoid back in and then she fired up after I primed carb - but when the problem occured is when i turned the light on and i think somewhere it may have shorted solenoid???? Thing didn't come with any manual what so ever- soo,hope this helps ,got unit from Govplanet
@johncunningham2259 I've definitely read various complaints about the crazy wiring and in some cases what appears to be excess wiring. I hate electrical gremlins. Mine has been fine on that end. Hopefully someone reading your comment will chime in. That solenoid issue is the 1st I've heard of. I try to scour videos for info but your issue is new. I'll keep looking.
It would be nice to see you build the pump track with the mini skid. I'm thinking about picking one up to help around the BMX track that I help run in Vegas. It seems like it would be a little weird going over the jumps with the mini skid steer.
@JoeMofknDot It is definitely short 'wheelbase', if you will, machine. Depending on the height of the rollers and the gaps (peaks and valleys) it could be a good thing. The way the controls are it will be a challenge to try to back drag it. I anticipate moving the bulk of materials with it, yet still doing a lot of flat shovel, rake and plate compactor work.
At 4:10 you have a wrong statement. The diggit 850 have the same controls as the unit you are running. I own a 2023 and a 2024 diggit 850. The 2022 diggit 850 was yellow with yellow arms and used pilot controls. They are unusable and should be avoided
Bring it to Blythe so we can fine tune the Pit Bike track 😎🏁
@@KennyKalian-c9s I thought the track was getting moved for the shop build.
Do you jave a link for the oil drain hose ?
@@Sandbridgeman1 EZ-109(12mm-1.5) EZ Oil Drain Valve with removable Straight Hose End(H-001) Combo a.co/d/iB4KjgL
@Sandbridgeman1 Any of the 12mmx1.5 drain hoses on Amazon will fit. I used the valve in the link. Then I added a hose with a removable plug. Pain though. Had to unbolt motor and raise it so I could thread in the valve. The hose versions just thread in.
The controls are super sensitive if precision is your goal. It'll require much more practice than one might think. We'll done.
@@franklinshooter3050 Thank you.
This was 3 months ago, how has it been running since removing the stock fuel filter and installing the 12V pump? Does it over fuel at all?
@matthewteuton844 It's been running great. I've put a couple of almost non stop use days of 4-5 hours each. Love it.
@ Thanks Mike, good to hear.
Have you seen anything on the size or part # on your tracks? I can't find anything on my 2023 LRT23 tracks but the best I've come up with is they may be 180x37x41?? mine has major splits from coming off several times after rocks get in there and derail them. thats when i realized if the track breaks you will be dead in the water without a replacement.
correction, ... 180x72x41?
@@jamesstanley5503 I do not know the size. I've reached out to a few resources to see if I can find out.
@jamesstanley5503 I had 1 reply and say size 180x73x37, but I only found 180x72x37. I didn't know how the sizing broke down. Appears to be 180mm widthx72degree lug pitchx37 cog teeth. Try TrackLoaderParts.com
@jamesstanley5503 Sorry that took a while. Only 1 reply out of 3 inquiries sent. Let me know if it helps and what you go with. I should probably save up for a backup set.
How did you fix the fuel issue? Did I miss it? Mine has same problem, been watching your videos for help. Thanks!
@@goodwinezone2320 Start by replacing the stock fuel filter.
Know where to get replacement tracks for it ?
@@kyledall957 I do not. On one of "The J Bro's" videos, they bought new tracks, but theirs is the triangulated, high drive motor style. The track source may be in their video description.
@@kyledall957 You might try K & R equipment in Oklahoma. Google them. They sell Kymron minis.