Just did one on my 2014 F150. Funny thing is text a couple of buddies the same thing..."10-15mins to install". Good video. Went with a different one that had a handle welded to a nut for the ball joint on the tailgate itself, but same concept.
Where did you find it I am looking did one for my 2013 f150 due to the comments, I've seen that state that because the hole on the truck is too big the but vends over time due to the weight of the tailgate.
I ordered a similar one but the cable binds on it with the strut. Not enough room. They are all pretty much the same, regardless of brand. I think my damn truck has beefier cables. The shrink wrap near the loop on mine looks like it’s twice as big as yours. Oh well. I have a 2013 FX4. I put one on a 2019 F150 with zero issues. But my 13 sucks lol.
@freakfiveoh my truck is like yours. It's a 13'. There is a bar that runs through the bottom of the tailgate and it twists as you raise or lower the tailgate, it takes the weight out of it forsure. Sometimes they break also.
I was wondering if you had any problems with the cable? I put one on my truck and the cable seems to get in the way. I have to put it between the strut and the bed and make sure it doesn't pop out when I shut the gate.
I bought one from Ronin Factory. Installs the exact same way. But mine moves sooooo slooooow.... Does yours lower at any different rate of speed when it’s cold outside?
And what components exactly are different between the win the standard F154 by 4 and the FX4 package and then I saw another one the other day that was a sport 4 by 4 pack
What ones did you see. That maybe the issue I am having. I ordered one and I think my cables are beefier than the this truck. I have an FX4 and the cable is too thick to give the strut and the Mount room to move with out hanging up on each other.
I'm not satisfied with any tailgate "assist" that only does HALF the job. Looking for one that will let the tailgate down slowly AND assist to lift it back up to close it! Are you aware of any such thing?
@@freakfiveoh why isnt it identical? I tried a putting it on a long time ago, and had the nursert strip or something, and the round head would freely spin and not hold on. I want give a second try but I need another nursert. Do u know where I can get one?
Broke the bolt because I torqued it don’t torque it lol not necessary now I have to find order another ball joint and the thing that goes in the tailgate fml
@@freakfiveoh mine is pinching between the ball of the cylinder and the bed door. I had to force it shut. Every video I've seen so far, no one shows the initial closing of the tailgate... They just cut to it being closed.
I'm 5 years late to the party, but your instructions were very easy to follow. Thanks, now my 2011 feels like a 2024...lol
Wow, didn’t know this could be done. Just ordered one. Was looking up videos as to why my cooking fan was LOUD, and this came up. Thanks!
Lol, sorry I couldn't help fix your fan.
I just installed mine on my 09 F150 and love it. Took less than 15 minutes
it was super simple indeed. Thanks for the video, it helped watching it before I started.
That’s awesome, I’m glad it helped.
It’s a little different on a 2020. Great video
Just installed mine, took about 10 min total time!
Just did one on my 2014 F150. Funny thing is text a couple of buddies the same thing..."10-15mins to install". Good video. Went with a different one that had a handle welded to a nut for the ball joint on the tailgate itself, but same concept.
Where did you find it I am looking did one for my 2013 f150 due to the comments, I've seen that state that because the hole on the truck is too big the but vends over time due to the weight of the tailgate.
@@nonotouchtv Got mine on Amazon. Here is a link to it.
Winunite for 2004-2014 F150(NOT... www.amazon.com/dp/B07WJKGN16?ref=ppx_pop_mob_ap_share
I just installed mine. Really like the function of it.
Yeah it’s nice, sometimes I forget it’s there and I still try to drop it by hand
Excellent video thanks.
I ordered a similar one but the cable binds on it with the strut. Not enough room. They are all pretty much the same, regardless of brand. I think my damn truck has beefier cables. The shrink wrap near the loop on mine looks like it’s twice as big as yours.
Oh well. I have a 2013 FX4. I put one on a 2019 F150 with zero issues. But my 13 sucks lol.
Got me squared away!!😊
Good Job 👍
Just installed mine 10 minutes! $14.00 from Amazon. No lock stuff needed!
I use the tailgate to build my biceps ;)
As you should
My Ram’s tailgate is getting too heavy for me to lift at 67. I want an up assist.
Now on to the jockey box assistance shock.
Never heard of it, is that a different brand?
There is a torsion bar there for that on the fx4.
Does this mean it won't work for fx4?
My truck was an FX4, maybe he's talking about the new trucks that have it as a factory option.
@freakfiveoh my truck is like yours. It's a 13'.
There is a bar that runs through the bottom of the tailgate and it twists as you raise or lower the tailgate, it takes the weight out of it forsure.
Sometimes they break also.
This a game changer!! Thank you for this video!!
I was wondering if you had any problems with the cable? I put one on my truck and the cable seems to get in the way. I have to put it between the strut and the bed and make sure it doesn't pop out when I shut the gate.
Mine never had problems with the cable, but the strut attachment eventually failed.
Thanks. Help[ed a lot.
Nicely done...thank you
Also if the newer bumper will fit my truck
I'm assuming this helps deter stealing the tailgate too right?
Not so much, the dampener comes off pretty easy. The only real security is keeping your tailgate locked.
I'm trying to determine if the newer tailgate engage with the backup camera in the handle will fit my 2010 truck
Probably not but they sell conversion kits
When it cold it takes my tailgate 2 weeks to fully open..
.how's yours?
Mine didn't have that issue, but the tailgate assist eventually broke.
Thanks, I can do it
I bought one from Ronin Factory. Installs the exact same way. But mine moves sooooo slooooow....
Does yours lower at any different rate of speed when it’s cold outside?
I’ve never noticed it moving faster or slower based on temperature
And what components exactly are different between the win the standard F154 by 4 and the FX4 package and then I saw another one the other day that was a sport 4 by 4 pack
What ones did you see. That maybe the issue I am having. I ordered one and I think my cables are beefier than the this truck. I have an FX4 and the cable is too thick to give the strut and the Mount room to move with out hanging up on each other.
It’s a tail gate lowering assist... does it help with the weight of the tail gate while you lift up though? Thanks!
I wouldn’t say it helps lift the tailgate, but the shock doesn’t make it any harder to lift, it just softens the opening.
That sucks had me excited for about 30 seconds
How did it hold up?
What kind of ratchet were you using?
I just have a basic Craftsman set, and I think I might have used one of their ratcheting wrenches as well if I remember correcty.
Good stuff
Thanks!
Just installed mine, but it goes down extremely slow. Nothing like yours in the video.
Is your tailgate aluminum? Just speculating, but if it doesn't weigh as much, that could explain a slower fall.
If the star seems stuck any remedies
Not sure what you mean, it's been a while since I made this video.
I'm not satisfied with any tailgate "assist" that only does HALF the job. Looking for one that will let the tailgate down slowly AND assist to lift it back up to close it! Are you aware of any such thing?
As of right now, I haven’t seen anything like that. Some newer trucks have that option, but it uses an electric motor to lift the tailgate.
@@freakfiveoh ty
Flip the shock around the other way, and it will assist in closing the tailgate. That's what I did on mine.
Can you install two of them ?
Not to my knowledge. This kit I used states it can only be used on the drivers side of the truck.
@@freakfiveoh why isnt it identical? I tried a putting it on a long time ago, and had the nursert strip or something, and the round head would freely spin and not hold on. I want give a second try but I need another nursert. Do u know where I can get one?
Why just one?
Seems to be all it needs honestly
Awesome, thanks for the response
@@sst6555 Always use two, don’t want any more children !!!
Having hard time with snapping it together
Broke the bolt because I torqued it don’t torque it lol not necessary now
I have to find order another ball joint and the thing that goes in the tailgate fml
Ugga duggas are dangerous
Lies. This pinches the cable on my 2013. I took it off immediately. I'd rather have my safety cable intact.
I dunno what to tell ya, I never had any problems with the cable on mine.
@@freakfiveoh mine is pinching between the ball of the cylinder and the bed door. I had to force it shut. Every video I've seen so far, no one shows the initial closing of the tailgate... They just cut to it being closed.