How to Reset the Service Indicator Light - KTM 1290 Superduke R
Вставка
- Опубліковано 6 вер 2024
- A quick video showing you how to access the service interval menu on your KTM 1290, 1190 or any KTM with the same dash.
Please Like and Subscribe!
@MaximusVR46 - Instagram & Twitter
What’s with the black tape over the speed?
Had done a track day on it. It can be a distraction. Just hadn't removed it.
ahhhhh ok, the more you know LoL.. is that a common thing to do on the track?
@@maximusvr46
@@MrDeville84 Yes quite a few people do it
Extremely helpful info .... thank you , I was ready to buy something I really didn't need in order to clear the service reminder . 👍🏍
No probs, thanks for the support!
Great tip as I like to service my own bike, unlike Ducati who do everything possible to stop the owner modding or servicing his/her own bike.
I have a general failure error on my 1290 qdr 2014
Service 6954km on the clock I have currrently 23560km odo so... meybe general failure error gonna lost after this what you do on the video , meybe thats gonna help!
General Failure can be a number of things, e.g broken or loose wire, faulty switch, low / weak battery, water where it shouldn't be, might be worth getting it diagnosed at dealer. I doubt this will clear it. Thanks for watching
Thanks for the helpful video. I can confirm this works on the 2017 1090 Adventure R.
No problem glad i can help! Thanks for watching :)
Excellent Thanks !!!!! Big help - I know I didn't need a service as my KTM dealer told me its programmed by calendar - even if you don't ride it the service engine light will come on
Thanks! Glad I can help :)
Fine! It worked on my GT 2017 as well. Thank you!
Glad to help you! 👍
My dealer ''P&H at Crawley'' refused to re-set it as they didnt do the service.. Pffff typical, so thank you. :)
Your very welcome
Just question i now have about 620 kilometers on my 2020 1290 SDR,today i did were you slightly hold front brake and gas her in first gear for about 5 meter's, when i stop at the bottom of my dash yellow light said abs failure, then mtc failure everything works as it should,but now i have picture of engine,anyway of getting that car motor picture gone or reset,thanks if can help me out. Never had v-twin my last bike ZX14R,i love this damm thing,i just turned 56 years old,am smoking the young boys on there 1000 superbikes in the corners. So comfortable can't wait someone makes aftermarket fly screen,that works.
disconnect your battery, clean the ABS sensors and rings with a good cleaner. Works on 2015 after i give it a thrashing. If you're trying to do rolling burnouts you need everything turned off. It will throw up lights when the ABS and TC is kicking in....Exiting corners full tap or coming in too hot you'll see them flash. That's means they are working.
Just done it , fixed. Thanks. Love to send You a photo of my bike. I have changed it tastefully.
Thanks, worked on my 2017 KTM 129 SA-T.
Awesome, thanks for watching 👍
Works for 2016 KTM Super Duke GT 1290 as well. Thanks!
No probs! Thanks for the comment 👍
Thanks. Can confirm this also works on the 2014 1190 Adventure.
No probs! Yes my mate has the 1190 and it was the same.
I am doing this same procedure on my 2015 1290. I keep holding those and it just flashes and does not get to that service area you got to.
Thank you. I will try that now on my Super Duke GT
Thanks! 2015 SDR - works!
Your Welcome!
Thnks Max!! Great explanation, high video quality and straight to the point - it helped me out on my 2017 1290SA-t. Liked and subscribed..:-)
Thank you very much for the positive feedback and support! Cheers!
Thanks for the video wish I could have seen which buttons you are pressing
Cheers no problem. Yes i agree i should have made it clear which buttons sorry. Will take that on board for future vids. Cheers, take it easy!
So it doesn't really reset, just extends the time you have until it comes on. Once it comes on, dealer must reset, is that correct?
no dealer doesn't need to reset, when it comes on you reset the interval which clears the service light on the dash
Tnx mate! Cheers!
Thanks for sharing. Appreciate the tip.
No probs, thanks for watching.
Liked and subscribed. Thank you for sharing!!
Thank you! 👍
Bravo...grazie
Thank you for sharing!!!!
Great!
Thanks!
Can you please advise where to obtain a copy of the service manual. Thank you
Go to Austin exhaust systems
Thanks! Appreciate it.
No Worries! Cheers!
Thank you Maestro... :-)
No problem! Thanks for the comment 😀
❤
Utilissimo! Grazie
thank you
Welcome!
Doesn't this just postpone the oil service light til 15k.. not actually reset it 🤪
well it resets the internal timer to whatever you choose up to 15k
Anybody else lose their TPMS screen after doing this? Dropped the code but also dropped the TPMS screen! 😂
Never had TPMS on the gen 1 sdr
@@maximusvr46 Ah ok, I was thinking 1st gen 1290SA and SDR both had it. Did this same sequence on a 2015 1290SA and lost the TPMS, oddly.
@@wretchedrider2157 ah not sure about the SA
@@maximusvr46 Same instrument cluster (pre-iPad/TFT) but I guess slightly different info! 😂