How to Change ADV Motorcycle Tires Using the Baja No Pinch Tool (Gear and Beer Ep3)
Вставка
- Опубліковано 8 кві 2020
- Tools in this video:
Baja No Pinch Tire Tool - amzn.to/2PUezpH
Great Tire Inflator - amzn.to/2W4aDX9 or amzn.to/33bOFD7
Best Tire Lube!!- amzn.to/2W6IKOs
Light weight Tire Irons - amzn.to/3cQmPAX
Valve Stem Puller - amzn.to/3ec4uia
Tire Mat - amzn.to/2y4Ukzm
Instagram: / backcountryadvmotorsports
Facebook: / backcountryadvmoto
website- www.ridewithbam.com
Music from epidimicsound.com
**Do you want to support this channel? **
Check out the Store - backcountryadvmoto.com/store
Become a Producer - backcountryadvmoto.com/become...
SHOP Revzilla’s Top gear for your bike: imp.i104546.net/0ZQg2M
RPM- Membership - imp.i104546.net/c/3915092/112...
Want to send us something?
Send to : 524 E Sherman Rd Coeur d Alene ID 83814
Instagram: / backcountryadvmotorsports
Facebook: / backcountryadvmoto
website- www.ridewithbam.com
Music from epidimicsound.com
Links to some of my favorite gear:
Arclite ETHOS VLD Moto Sunglasses- amzn.to/38xwRDu
GoPro 11 - amzn.to/3oomq2V
Cardo Packtalk Edge - cardosystems.refr.cc/Ridewithbam
Nemo Sleeping Bag - motocampnerd.com/products/nem...
Nemo Fillow - motocampnerd.com/products/nem...
Camp Chair - amzn.to/32X8rCl
Sea to Summit Pocket Shower - motocampnerd.com/products/sea...
Sea to Summit Pillow - amzn.to/2TQZ7Mm
Sea to Summit stuff sack - amzn.to/2TKo9fN
Sea to Summit Cook Set - amzn.to/2uZF4CL
Nemo Fillo Stanley Coffee Press - amzn.to/3avFy2w
Sleeping Pad - motocampnerd.com/products/big...
Baja No Pinch Tire Tool - amzn.to/2PUezpH
Great Tire Inflator - imp.i104546.net/1rrXeg
Best Tire Lube!!-imp.i104546.net/XYYgy5
Light weight Tire Irons - imp.i104546.net/oqqxRg
Super Light Titanium wrenches - imp.i104546.net/EKKLbX
Bike Add Ons:
Outback Motortek Crashbar system and skid plate - OutbackMotortek.com
Denali Lights - imp.i104546.net/y22aqy
Ohlins Custom Front Forks - ohlinsusa.com
Ohlins Rear Shock - imp.i104546.net/OrrkBA
Akrapovic Exhaust - imp.i104546.net/R55AP7
Power Commander - imp.i104546.net/4PPz51
AltRider Radiator guard - imp.i104546.net/y22agD
AltRider Headlight Guard- imp.i104546.net/MmmPnP
AltRider Pillion and Luggage racks - imp.i104546.net/rQQ9nG
AltRider Regulator guard - imp.i104546.net/VmmJyR
AltRider Clutch arm guard - imp.i104546.net/VmmJyR
AltRider High Fender Kit - imp.i104546.net/VmmJyR
Bark Buster Storm hand guards - imp.i104546.net/zNNAam
IMS Foot pegs - imp.i104546.net/nLLq1x
Camel ADV Windshield Support camel-adv.com
Camel ADV Footpeg Bracket
Camel ADV Aux Fuel Tank
MOTOZ Tractionator - Front- Rear- amzn.to/3cDD0l6
Motoz Desert HT - amzn.to/3cGyd23
Double take ADV Mirrors - amzn.to/32XJUNq
Touratech luggage racks
Touratech Rear Brake Res Guard
RAM Phone Mount - imp.i104546.net/jrrNrn
20mm Bar risers - imp.i104546.net/5ggWgn
Scotts Performance Steering Stabilizer - imp.i104546.net/xkkekO
STEGPegz
Luggage: Moskomoto.com
Riding Gear
Helmet: Nexx x.wrl -imp.i104546.net/eKK3KZ
Klim Carlsbad Jacket and pants- imp.i104546.net/GmmxmB
Klim Inferno Fleece mid layer -imp.i104546.net/B00N04
Sidi Adventure Boots - imp.i104546.net/WqqZqn
Gloves - imp.i104546.net/6ee0e3 Summer
imp.i104546.net/4PPzGG Winter - Авто та транспорт
This is the only video that I've seen on how to actually put the tool together and use it... Not even on Baja's web page. Thank you for taking the time to make this video. I don't regret my purchase anymore LOL
I look forward to the videos you've been putting out. High quality. Keep up the good work. 👍
Thanks, will do! That means a lot
Just awesome my friend 👍. No hassles. Just what you need when off-road, no time to waste! Thanks mate.
Bead buddy is the premier frustration eliminator lol I’m sure a lot of people watching,that just found out about both of these tools had a huge sigh of relief ❤️
Best tire change video EVER! Thanks buddy.
very nice! made something "ish" like that a while ago consisting of nut I screwed onto my axel. I welded it to another nut that used a long piece of all-thread with a washer welded to the end to get the job done. This from your video looks like such an improvement from my old idea!
I have used the Baja No Pinch for years, the best tire tool ever. Great video, thanks
+DFW Moto Adventures thanks for watching 👍🏻
Fantastic video! I Just purchased a no pinch Baja to change my mx bike tires. My first tire change using only spoons kicked my butt, so bad that I got so frustrated I just took it to get it done at a shop. Hopefully this tool will help me get it done at home. Thank you for great video!
I am saving up for my 1st bike. A few of the bikes that are on the short list have spoked wheels and tube tires. I have been seeing a lot about pinched tubes, and my inexperience has been angling my choice in bike towards those with tubeless tires. This is a game changer and puts my top choices in bikes back in their top spots.
Thanks Kyle. I'm planning on using the Tractionator Adventure for my next rear tire.
Purchase one of them tools a couple years ago I got a chance to use it on the trail for myself. The thing is truly magical. Did the trans Wisconsin adventure trail with a bunch of guys on dual sports and had a chance to pull this out at the end of day to help to help a buddy out. Everybody was standing around me thinking that thing was a gimmick. It took one tire to change the minds of those 9 old school Moto boys. I think two or three of them have purchased it. The others just hope I bring the long every time we ride.
This is the best tyre changing video on UA-cam. Good job. I've liked and subscribed.
Well damn. Thats pretty slick.
Im really liking these gear and tool reviews.
Thanks they are fun to make and hopefully they help the viewer out :)
I"m a big fan of the BullSnot... I discovered it maybe 2 years ago and it was a game changer... no more cursing when changing tires... almost no cursing anyway.
Your videos are so easy to follow...you focus our attention on what matters...every bit of the videos are meaty instruction-wise. "Just the facts." Thanks!
This is one of the best channels if not the best I've seen. And the coolest part is that i have an AT. So all your advices ar very usefull for me. Greetings from Perú!
Damn it, now I have to buy something else lol. Great video as always buddy.
This is a great video! Wish I watched it before I used my Tool.
Thanks for sharing!
Wow, that valve stem puller / inserter is a great idea! I now may try replacing my popped tube again. Last time was a bear for the valve stem & pinching.
Don’t need it if you just put the valve stem in first when putting tube in the tire. Kinda weird how he does it at the end imo
Thanx dude that’s great.
Safe ride. 👍🤜
Yet another really helpful video …I actually have the Baja No Pinch tool, which is not such a common tool people have in their possession from what I've seen here in Australia. I was good to see that you used an extra sleeve to fit the Africa Twin, which is something that I don't presently have. Insightful and well presented. Cheers again
Thanks for the compliment and thanks for watching
I carried a BNPT on a trip with the Adventure Rider magazine crew. I ended up changing several tryes over the 3 week period, none of them mine. I think it makes 17 inch tyres a lot easier, especially with Motoz tyres. I carried a Bike Plier G clamp too to break the bead. That can a PIA job if you ride solo.
Really appreciate this video. Great instruction.
Great video! Thanks for sharing your great experience. 🖒
Thanks for watching! Hope it helps
I too have an Africa twin enjoy your videos are very informative
Another good informative video ! thanks man !!
Thank you sir 👍🏻
I got the baja no puncher after watching this video it is Awesome thanks bro
What an awesome little tool. It's the kind of thing you know someone thought of while stranded and frustrated in the middle of nowhere. I ride sport bikes but can see how this would be extremely helpful in ADV riding. I swear, motorcyclists are some of the most clever people.
It works on sportbike rims as well
So a tip I learned from the Dunlop guys is after you put in your baby power put the tube in the tire add a little air then mount the tire like you did starting with valve stem. This works very well for me and have been doing it for years now. Also I put my knees on tire where I started mounting it to push the bead into the center of the wheel, that allows the opposite end of the tire to be a little looser to help seat the final section of the tire.
Good tip!
I wish I've watched this before pinching the tube twice and wrestling with the tyre to get the valve stem out! Thanks for the video!
Good Job! Nice Demo!
Thanks! Glad you liked it. Thanks for watching
Very informative video. I broke a tube when putting mitas e07+ on. It was so frustrating. Nice tool.
+JoonasK 👍🏻
Baja no pinch works awesome. Even I can change a tire using that!
Yes it does! Don't short yourself Jeremy, you'll be a backyard mechanic before you know it. You are getting some good practice ;)
Thank you for a helpful video 👍
The valve stem puller is such a badass idea I hate trying to stuff my hands in trying to get the stem through thanks for the idea!!
Saves a ton of frustration. Especially on tires with stiff sidewalls
Good job. Good job. Good jooooob!!!
Man I want tubeless now..! Nice vid thx
Fantastic tool. I will use your link to buy my Baja No Pinch and, if possible, my beer.
Excellent and very informative video!
Glad it was helpful!
Thanks for posting this!!
You bet!
Great job.
Thanks always wondered if it was any good.
I knew more about beer when I lived in north Idaho too. The winters are indeed long.
Pretty slick!
yeah its a pretty handy tool. Thanks for watching!
Thats Fxxx genius 👍👌👍 I need this 👌👍👌👍
Pretty cool tool!
its handy for sure.
Great vid...!
I'm jealous of how easy that came off having done an Anakee Wild myself. That was a stiff one.
Anakee Wild is one stiff bastard of a tyre. I have felt your pain. I did mine with levers, tire spoons as you say in the US. I wish I'd had that magic little tool.
great video
Ahh a fellow CDA ADV rider, neat
Nice tool
Nice job
Thanks, wonderful info.
Glad it was helpful!
Thanks for the video I learned some thing new
Glad to help
Thanks buddy.
Nice job. Ty
Watchin!!! Thanks!
Thank you. I’ll be definitely ordering one the next time I need a rear tire. My motoz gos was a bear to mount with irons. I’ll be sticking with motoz but want more aggressive next time
+Sciberras Outdoors the MOTOZ ADV tire is a good balance. It’s a true 50/50 tire
I just bought a set of desert HT, the last tractionator set I bought was a beast to install as well...could've used a tool like this. Thanks for the review.
This thing is 19% off right now from the makers website. I’ve been eyeing it for a while. Getting my e07+ on is a bear in the best of circumstances at home. On the trail In the heat worn out, good luck.
Man, I wished I lived down the street from you so I could buy you a bunch of beers and have you teach me how to do all this stuff. But maybe with your videos I'll figure it out in my garage and not on the side of the road. I am still pretty much clueless. Wish you showed taking it off and putting it back on the bike as well.
+Dennis A sorry bout that Dennis. That part is honestly not too bad. Loosen the adjusters in the side, remove the rear axle, and remove the wheel. Maybe I’ll record it next time I get a flat 🤣. On a serious note though I’ll keep that in mind when I get around to changing another tire. Cheers
This is legit thanks for the video.
No problem! Thanks for watching
Nice tool! I will be buying one soon!
If you have every fought a tire on the side of the road/trail you know how it can suck. You should get one !
@@backcountryadvmoto Au contraire, my dear friend, I want to buy it because, luckily, I've never fought a tire before, not even at my garage, and sincerely I would like to stay virgin at that! :D
Man I pinched my tube last week after a flat on my Tenere 700. I totally wanted to throw the wheel through my front window of the house like that old discount tire commercial. Thanks a ton for the vid, I think I'll pick this thing up. 🍻
Digging your content, but you got the sub for being like “Steve’s Small Engine Saloon” who quotes repair jobs in beers. If you have not checked him out, you need to. That man is a miracle worker with small engines.
So much easier to put the tube on the rim first, then put rim and tub in center of tire, then put the beads on either side. Very important to make sure opposite side of tire bead is in the narrow portion of the rim so tire bead can form more of an ellipse . Remember a 1-inch peg will not fit in a 1-inch hole, you need some clearance room.
Beer and gear review😉👍👍👍
You know it!
American tools are the best!
great vid, nice tool, thx
+Zsolt Boda thanks for checking it out
Very usefull👍, thx and Cheers
Thanks for watching
That was a brilliant video, I think I shall puncture my tyre and try that😂
If you put the valve stem nut on the puller before you push it into the wheel, you can put the nut on before you remove it from the stem. I wouldn't step on the brake disk, but that's just me.. (:> Been thinking about getting a Baja, looks like a great tool. Thanks for the vid!
I have issues with the Baja No Pinch with 21" wheels. 18" wheels no problem. I didn't realize BNP instructs one to lift the hub so the red part is flush. I either overlooked that instruction and found that out on my own and yes it makes it easier. I might go back and try the lifting the hub on a 21" to see how it goes.
Thanks for the very good instructions. Have you thought about converting your rims into tubless? I did it with my MTB rims and it worked very good. Cheers Juergen
Better : ending the mounting at the - (valve ! - ( especially with narrow rims it is important ) - and if valve-position is marked on the tire, balancing will be correct again ! - ( if using the old tire )
I will be getting one soon. Thanks for sharing..you possibly could cut off some of that shaft so you can leave it flat on the ground..just a thought.
Very True, Ive considered it. It works ok if its not flush to the hub, but it just depend on how stiff the tire is.
Cheap tricks: Use a space blanket/ foil emergency blanket under the tyre when you put it in the sun to soften. For lube, add some Lux Flakes laundry soap to very hot water . when it solidifies it makes a very good tyre lube.
The list of things to have for my bike just gets longer and longer . At least you can buy a tool once and not have to get another one for each bike .
Definitely will watch this video again when it comes time to change my first motorcycle tire .
yep saw these along time ago and was going to get 1 but was WAY to dear for me🤔😖 sooo i now use a home made one (looks crap ) works well🤣👍 i dont ride without it 😁👍
oh made out of 20mm x 20mm rhs and old bike chain😁👌
keep well Sir and be safe😁🍺
Great vid, thanks! Love that towel/pad. Where’d you get that?
I'm surprised that no-one ragged you for not protecting the rotor when facing down. A pair of scrap 2 x 4's will do.
One tip I would like to pass along: I like to put the tube in the tire first, then inflate just enough to give it shape. Then it will stay out of the way when you put the top bead on.
Super jealous of your location, has to be one of the most beautiful places in the US.
“It’s like KY for your tires!” Naughty!! LOL!!
lol I knew someone would mention that in the comments ;)
Backcountry Adventure Motorsports, I’m that guy this time! I was waiting for that bead buddy to come out...such a lifesaver!!! This just tells me to use my BNP tool! I’ve just an old school tire iron guy! I’ve got one...I need to use the damned thing! LOL! ✌🏼
Biker Sasquatch haha no worries. I hear ya, I’ve always used spoons till about a year ago. The one thing that this tool does that I really like is give me the piece of mind that the tube isn’t going to get pinched when spooning the tire on. That just sucks especially when you only have one tube to work with
Backcountry Adventure Motorsports, I’ve got the rear wheeled taped, and have gone tubeless. Running a UHD up front. So far the tubeless set up out back has been great! I’ve been running Kenda Big Blocks, the price is so good, but I may give your tire suggestions a shot!
I am buying my first africa twin I am not the best at changing tires do you recommend replacing tubes everytime you put on a new tire barring no flats how many tire changes per tube and what type tube do you recommend I am going to try and order as much tire changing stuff through your affiliets I just got a 2021 africa twin do you know what size the axle nut is thank you for your answers I havent seen all your videos yet and you have probably answered these a hundred time thanks. The tire change newbie
Never... ever ever ever ever... 'just push it out' :))))) never ever. Ever. Ever.... with the shinko 705, i have to see that yet. You make it look easy
This was a motoz adv tire and it is by far the stiffest side wall of any tire I’ve changed. I’ve known guys to sawzall them off 😆. This tool works like a charm
Thanks for video. Is the purple sleeve used for the front tire too on the AT 1000L?
No, blue for the front purple for the rear 👍🏻
what color collar/shaft do you need for the front axle on the Africa twin for the No-pinch tool?
pinch the tire 180 away from the spoon, then lever. If you do it right the bead 180 degrees away from the spoon will pull into the lowest spot of the rim. Not always easy to do depending on sidewall stiffness etc...
Great video man, There cannot possibly be a better system and tool to get the job done that quickly and pinch trauma proof out in the wilds
Ordering one...... Cheers man, love your content, truly helpful across the board
Right on thanks for watching
What brand tube do you use? I find it hard finding the correct tube size for this wheel size
Great video...How many flats do you get a season? I got a 2017 AT and I'm looking at the 2020 mainly for the tubeless wheels. Do you know if they make that much of a difference? I demoed a new and wow soooo much more power it was awesome. So still going to buy one just wondering about the wheels?
Tubeless can be easier for sure. What I like about tubes is that if you bend a wheel you can still roll with it instead of trying to beat it and straighten it out. plus if you tear a side wall you can still be ok with a tube ( sometimes) Honestly, Ive never had a flat on my AT, but Im constantly changing tires for the people i ride with. when you are in a group we have the mentality that his flat is also yours so help out lol
Mmm get tool! Very clever!
However, 6-8 beer job🍺🍺🍺🍺🍺🍺🍺🍺😝🥳🥳🥳
+fuzimuf 😂 could be, depending on how slow you work and how fast you drink lol thanks for watching
what's is your consensus on balance beads for on the field replacement? I have been using them for years on my harley but i am pretty new to the ADV side of things
+SnowCityRider I actually run them now. My only beef with them is if you adjust your pressures often, they can sometimes get fought in the valve stem and not allow it to seal.
Great video - thanks. Do you carry the no pinch tool with you on your backcountry trips/trail rides?
Yes I do, It stays on the bike at all times. I have the parts stored in various places so they do not get in the way and are easy to carry
the bullsnot can't be found anywhere. what else have you use that works as good?
Great vid. Riding up from Western in Scottsdale with a 19 ATAS this weekend. Any recos on wrenches you use for wheel removal from the bike? Some versions (like I had for my Vstrom) are pretty flimsy.
These are great. Strong and really light weight. amzn.to/3cQmPAX
Could not put on tire without spoons, this tool helps sort of, but seems to be made for really flexiable knobbies. Works ok, but will not get get tires mounted without help from spoons for road tires. At 16:33 you can tell the tire is very flexiable and putting up very little resistance.
Hello. Subscribed and watch all your vids. Question: Do you prefer tube tires or would you rather the bike had come with tubeless? Thanks.
Thanks for the sub! I honestly do not care either way. They both have pros and cons
I possible use at new tyres am use g clamp to drop edge tyres from rims, pro bed does not work tyres to soft tubeless stack like glue to rim
With all that bull snort on it is there any chance of the tyre slipping out of the rim especially on a hot day ride where the tyre pressure gets to max plus?
My Super10 has tubeless tires, so I do carry plugs. However, I’ve heard guys say the carry a tube in case they cut a side wall, so they can at least get somewhere to replace the tire. Can you put your 2 cents in on the subject? Great videos by the way. And thanks for your service.
Yes I would recommend carrying a tube. If you slash a sidewall or dent the rim bad enough that the tire will not seat on the bead, you can use a tube to get you by.
Good stuff.... I will likely pick up a "no pinch".... I hate changing tires...
Its helpful for sure! make the job easier
I’m gonna have to order one of these. I put a Dunlop Trailmax Mission on a couple of days ago and was not having a good time.
Its a game changer for sure. I have a manual tire stand, and I dont even use it anymore
Me too! Did a month's worth of swearing over the course of about 90 minutes before giving up. The front was doable, the rear was impossible.
I'm sceptical that the Baja could mount a TMM on my CB500X though as the mechanic at my local shop took about 30 minutes using a machine. After he was done he said that he wouldn't recommend the TMMs for my bike.
I won't be buying another set of TMMs, although at least they are tubeless and have a very stiff sidewall so hopefully they won't puncture out in the middle of nowhere
MotionPro bead breaker would be a nice add to ease bead breaking + can be used as tire irons. I usually put my tube in before mounting the tire so valve stem puller not required. Outstanding demo on use of the No Pinch!
Good info. I’ve considered getting the bead breaker but I already have very light weight aluminum spoons and always use the bike on the trail to break the bead. I’ll probably pick some up eventually though