I'm riding an electric scooter in Japan. The law is strict in Japan, so it's hard to play! The video was very interesting :) I'll come back again! With love from Japan :)
This guy is straight up making his own scooter. I thought he would just take a scooter and put a motor on it but he straight up makes his own. Impressive
Nick, if you like this project, you should check out my Kickstarter campaign... www.kickstarter.com/projects/walterteele/the-monster-scooter-full-diy-manual-videos-and-lin?ref=pbuild_dashboard#project-preview
- No breaks; - Exposed wheels; - Exposed batteries on the underside of the scooter. I've never seen an electric scooter this fast. This is the quicked diy way to meet God.
Nice tidy efficient work. Electric scooters here cost £1000's. Need to get welder & grinder. I like those thread making drill bits you used.. must get some. Thought you might have needed waterproof protection underneath to prevent rain splashing into the electrics. Insects too. Like to give this a whirl, got many parts & tools. Steel plate..? expensive! maybe aluminum. Got some motors, but trying out different configurations to cancel back emf, even use back emf to double the torque, even at low speeds. A drum motor attached to the back wheel is another option maybe. Am building a pure sine wave inverter, hopefully build a voltage-frequency motor controller using the 555 timer & an attenuator wave shaping circuit to get close to pure sine wave. Maybe you could rig up a dynamo-battery charger to recharge the batteries as you go. I built a small disc with magnets on it, connected to a motor, powering a light bulb one time. No batteries needed, just held another magnet close by & it went whizzing round to power the light bulb at 9v dc.
Jon, if you liked this project, you should check out my campaign... www.kickstarter.com/projects/walterteele/the-monster-scooter-full-diy-manual-videos-and-lin?ref=pbuild_dashboard#project-preview
Hello, I was wondering what are the Ah of the batteries you used, I am trying to build a scooter for myself but am having trouble finding the correct batteries
Before i checked the comments below, i was thinking "Wtf how to make a electric scooter AT HOME let me check the comments if there is someone else that is thinking the way i do!"
Why do you need brakes your not going fast you left off the throttle and put your foot down. The motor this uses is the same motor that they use on the electric scooters you can buy in a store for a couple hundred bucks it'll do about 5 to 7 miles an hour
Thanks for your tip! Very useful! How often do you charge it? My VehiGo just requires 15 mins quick charging time, and then I can fully charge my E-scooter while getting up and prepare myself for an awesome day.
With these motor if you switch the wiring you can get reverse I alway modify my little nieces and nephews electric scooters lol just a basic switch and also put lights from Wal-Mart , AWESOME SAUCE
What kind of metal did you make the frame out of? I thought aluminum until I saw the stick welding. Speaking of which, what's the filler rod you're using for the stick welding? Nice video, thanks for uploading :)
Hey, Karthikeyan... If you like DIY projects and electric scooters, check this out. It's a Kickstarter campaign I'm doing ... www.kickstarter.com/projects/walterteele/the-monster-scooter-full-diy-manual-videos-and-lin?ref=pbuild_dashboard#project-preview
Ramon Vieira Tomaz Pelo visto ele não responde comentários. Uma pena... Tbm tive essa dúvida e outras mais. Sobre o comprimento, imagino que tenha uns 80 a 90 cm. Me baseei pelo tamanho da bateria (Aprox 15 cm de comprimento cada). A largura deve ter ficado em torno de uns 10 a 12 cm.
@@eduardoxavier6352 E aí blz!? Então, se for o que estou pensando, é parafuso mesmo. Eu sugiro vc tirar um print com o celular e mostrar a imagem numa loja de parafusos da sua cidade, daí o vendedor vai te recomendar algo mais certo.
You can add bicycle breaks and depending on the speed controller it can get back some of the energy turning momentum into electricity and charge batteries back. Of course this conversion loses energy, but max operating distance increases.
Hey Leona, if you like DIY and electric scooters, check my Kickstarter campaign... www.kickstarter.com/projects/walterteele/the-monster-scooter-full-diy-manual-videos-and-lin?ref=pbuild_dashboard#project-preview
Cool but your construction is to weak ( your welds , screw who maintain the sprocket and the fork. ) But you are logic and it's well finished ! That's cool !
I'm riding an electric scooter in Japan. The law is strict in Japan, so it's hard to play! The video was very interesting :) I'll come back again! With love from Japan :)
@@-light9811 wtf
This guy is straight up making his own scooter. I thought he would just take a scooter and put a motor on it but he straight up makes his own. Impressive
Sadly I Don't own fancy tools as he does. Even Putting a Motor in a scooter is hard for me
Straight up right
I think he is a proffessional maker of scooters, he has all skills, necesary tools, devices, wires and equipment
Your straight up saying straight up too much
Awesome. Fun to watch. I love how you've used only basic tools. You have great talent and a great set of odds and ends in your workshop.
Creation is the key of humanity is amazing how by sharing ideas and concepts we develop amazing things thank you for sharing your cool projects.
De cuantos voltios es la bateria
Best soldering iron ever.....................:)
The expertise and the mechanics of details that are exceptionally balanced as well as configured for one's profound purpose(s) Congratulations.
Wow even his soldering iron is a home made !!! Bravo !!! 18:29 on !! Damn this guy is good lol
this guy got all thr tools and thr items he needs, what an amazing guy
Nick, if you like this project, you should check out my Kickstarter campaign...
www.kickstarter.com/projects/walterteele/the-monster-scooter-full-diy-manual-videos-and-lin?ref=pbuild_dashboard#project-preview
Great build. A lithium upgrade would make this unit awesome!
Thx for posting a great diy vid.
Cheers
Must put then also a charger controller
你是当前我在油管上见过动手能力最强的亚洲人. 滑板车做得不错，若把刹车考虑进去就更好了.
- No breaks;
- Exposed wheels;
- Exposed batteries on the underside of the scooter.
I've never seen an electric scooter this fast. This is the quicked diy way to meet God.
🤣😂🤣😂🤣😂
That is rather a simple concept - there is no wow factor in your invention.
very inocative, please request a picture of the scheme, hopefully shared images can make science and add charity
Thank you. I was wondering how to attach a sprocket to a wheel. Now I know.
Very great job mate definitely wonderful job. Thank you.
You have a lot of useful stuff lying around at home!
18:29 Dat badass soldering gun!
Legend bro you actually made your own frame for it! AWESOME I LIKE IT!
Great job, though I'd fit brakes even before thinking of fitting an electric motor. But I love the souldering device, is that your creation ?
Nice tidy efficient work. Electric scooters here cost £1000's. Need to get welder & grinder. I like those thread making drill bits you used.. must get some. Thought you might have needed waterproof protection underneath to prevent rain splashing into the electrics. Insects too.
Like to give this a whirl, got many parts & tools. Steel plate..? expensive! maybe aluminum. Got some motors, but trying out different configurations to cancel back emf, even use back emf to double the torque, even at low speeds. A drum motor attached to the back wheel is another option maybe. Am building a pure sine wave inverter, hopefully build a voltage-frequency motor controller using the 555 timer & an attenuator wave shaping circuit to get close to pure sine wave. Maybe you could rig up a dynamo-battery charger to recharge the batteries as you go. I built a small disc with magnets on it, connected to a motor, powering a light bulb one time. No batteries needed, just held another magnet close by & it went whizzing round to power the light bulb at 9v dc.
where's the brakes? that's a cool project, can you make auto swing for baby rocker please
why do you need brakes? 😂
Skateboard grip tape would be a nice addition. Nice build!
Jon, if you liked this project, you should check out my campaign...
www.kickstarter.com/projects/walterteele/the-monster-scooter-full-diy-manual-videos-and-lin?ref=pbuild_dashboard#project-preview
Seus projetos são os melhores,eu amo!!
hi i burhan I salute you for what you do is really like I live in turkey
Amazing!Seriously brother i am very impressed👍🏻
A guy who have too much free time :D grat good job
Hello, I was wondering what are the Ah of the batteries you used, I am trying to build a scooter for myself but am having trouble finding the correct batteries
Build a lithium battery pack out of recycled 18650's
I believe that they are 7Ah batteries
Very nice, well done it could all be made in alluminium it would be much lighter. How do you break???????
"How To Make A Electric Scooter At Home"... Yes, of course. I've got all this stuff at home...
Before i checked the comments below, i was thinking "Wtf how to make a electric scooter AT HOME let me check the comments if there is someone else that is thinking the way i do!"
even if you have all those stuff i doubt you can make it. Lol....
Well ur dumb
You can buy one wheel with a disc brake for $24 on Aliexpress.
@@SekFuny is that your description? Thanks for letting me know.
I love how he just shortened the bolt, I don't have a shorter bolt...I'll just make one! nice.
I am watching last video but you're not a break system this project please next time brake system thanks bro
Yeah break must be
Why do you need brakes your not going fast you left off the throttle and put your foot down. The motor this uses is the same motor that they use on the electric scooters you can buy in a store for a couple hundred bucks it'll do about 5 to 7 miles an hour
Hi
Naic bro
Indian Create sir Meri Bana Do scooter scooter
Great work!! can you add a brake in another video?
You need to cut that long nail mate! Great builds though!
Thanks for your tip! Very useful! How often do you charge it? My VehiGo just requires 15 mins quick charging time, and then I can fully charge my E-scooter while getting up and prepare myself for an awesome day.
Хорошо когда ты китаец и у тебя куча запчастей от самокатов ))
Амортизации ему не хватает, только для ровных дорог..
согласен лол я собирался чтото делать по этому видосу
Дно негерметичное и тормоза нужны) А ещё сурово он со всякими штекерами, явно их недолюбливает)
У меня точно такой же движок только на 48в. Собираюсь зделать что-то подобное
With these motor if you switch the wiring you can get reverse I alway modify my little nieces and nephews electric scooters lol just a basic switch and also put lights from Wal-Mart , AWESOME SAUCE
No break you should put break also than that will be great
*brakes
You're a very crafty person. Very creative. Impressive
Молодец ! Уважаю таких людей !
Eu queria ter um desse
Михаил Александрович ១
Михаил Александрович мне одному показалось, что это делает женщина?
И М да!
И М вы не видели как он в канце каталься на нём? Это он и делал
This is the most amazing scooter tutorials I have seen.
Congrats for one million subscribers
very nice
gOooooooooooooooooooooooooooooooooooooooooooood
Bravo l'Artiste merci pour cette belle vidéo
Opps ! Forgot to include any brakes.
Your a failed abortion opps !
@Mitchell Broderick your lost dad
I honestly just thought you would just put a motor on a normal board... not build one from scratch
That's sick man
Great vídeo, thanks for sharing!
I praise your hard work bro
where we give excileter in nepal
Peralatannya lengkap banget ya, bengkel kali rumahnya..
You know this is some Asian dude when he is doing it in his sandals
So what's the big deal?? Can you make your own as he did?? 🤭😏😏
What kind of metal did you make the frame out of? I thought aluminum until I saw the stick welding. Speaking of which, what's the filler rod you're using for the stick welding? Nice video, thanks for uploading :)
How To Make *An* Electric Scooter At Home
Hey!! Look at content. You will forget about grammar.
You are very talented...Congratulations...
Bro what's with the finger nails?💅
im your biggest fan :) u made a nice job! :) i want to make my own just the items is very expensive here in hungary :(
GREAT JOB MAN 😀🖒🖒
Aovcgf
!)(5474
You brilliant and greatest man in the world !!!!!!!!!
Hey, Karthikeyan... If you like DIY projects and electric scooters, check this out. It's a Kickstarter campaign I'm doing ... www.kickstarter.com/projects/walterteele/the-monster-scooter-full-diy-manual-videos-and-lin?ref=pbuild_dashboard#project-preview
Are you from Vietnam
he is
I get it
Day ??? of quarantine: watching someone make an electric scooter from scratch.
to make an electric scooter from scratch, first you have to create the universe
21:27 what’s up with that pinkie nail my man
How do you know that is a dude ?
Because at the end it appears to be a man
24:10
Guess LMAO
it's for sniffing powder , but i guess that was a retorical question ;)
@@SekFuny if my mom wouldve fit on a fingernail
You are hard working , hat s up to you
Boa. Qual.comprimento dos ferros. E qual bitola
Ramon Vieira Tomaz Pelo visto ele não responde comentários. Uma pena... Tbm tive essa dúvida e outras mais. Sobre o comprimento, imagino que tenha uns 80 a 90 cm. Me baseei pelo tamanho da bateria (Aprox 15 cm de comprimento cada). A largura deve ter ficado em torno de uns 10 a 12 cm.
RAPPBUENO isso. Deve ser isso mesmo. Valeu
@@rappbueno você sabe qual o nome daquele parafuso grande com uma porca na ponta ?
@@eduardoxavier6352 E aí blz!?
Então, se for o que estou pensando, é parafuso mesmo. Eu sugiro vc tirar um print com o celular e mostrar a imagem numa loja de parafusos da sua cidade, daí o vendedor vai te recomendar algo mais certo.
Se cara vendesse por encomenda eu ia comprar.
nice work...nice slippers ...breaks system a pending issue
Where are the breaks
You can add bicycle breaks and depending on the speed controller it can get back some of the energy turning momentum into electricity and charge batteries back. Of course this conversion loses energy, but max operating distance increases.
Thanks for your response
Levi Hollister That’s racist
@@Hellsong89 that battery rechargement system is really insignificant though..
@@jandajanda2242 no it's not
Awesome but simple to make escooter.. 😊👍
do you sell scooter how much to Las Vegas?
Nice work, may i ask how many watts are that motor u have used
But it has no breaks? 🤔
That's the beauty: NO BRAKES !Show me a store that sell a scooter without the brakes!
Grat job. what distances can you pick up in km with a full charge and how long it takes to charge the batteries.
How much did you spent on this project?
Wow this guy good with his hands.
Good Video 👍👍👍 the Drakes👍👍👍😘
Fak
je .. you are a genius this great Electric Scooter
Can u make a power full small trouch
nice
Venu Gopal
Good night, congratulations on your good work, I'm from Brazil, and I always follow your channel. Your scooter looks lovely.
Front fork not to good. its easy bend by crash
He wears flip flops while welding and bare feet right next to holes he’s drilling through metal.
I don’t think he cares about safety.
Also no waterproofing or brakes.
This is awesome !! Whats the max speed and actieradius ?
Great work
anuvind chingapuram ramavihar naynn
:
While testing time taht was a superb location
Lol i did the same thing with a fan motor😂🤣🤣😂
How fast did it go
You are very skilled, well done.
Hey Leona, if you like DIY and electric scooters, check my Kickstarter campaign... www.kickstarter.com/projects/walterteele/the-monster-scooter-full-diy-manual-videos-and-lin?ref=pbuild_dashboard#project-preview
Dude, not digging the long pinky nail... wouldn't be surprised if you could dig with it
It’s good luck
عنرزليصر
ناستةثتلمانبتالباتننتبصمنفب
Pinky nails for coke?
Impressive skills. Actually looks almost like a store bought one. Really good job
I liked
nice job bro just tell us what's the max speed with you on it and thx
LOL. I live a 600-lb Life, can you make me one of those. but with monster truck wheels, on it! LOL.
Hello dear friends sir you know to make a nice scooter looks pretty good 😊😅
Please make an go kart
Game Tutorials
love from Bangladesh. ✌✌✌✌👏👏
Oh WOW its a woman who makes this!
no its a man with one very long finger nail
are you blind?
Nice electric scooter build...
Welding with sandals
Amazing craftsmanship 👍👍👍👍👍👍
ทำเป็นโปรอาร์มได้ไหม?
07718354937
Hi
You are the real hero
wao keren banget 👍👍👍👍👍
Very best
I was gonna say put some work boots on but then I saw you bare foot lol , your a beast
Stopped watching when I realized the platform wasn't all 18650 cells
Check out my Kickstarter, it has 18650!
www.kickstarter.com/projects/walterteele/the-monster-scooter-full-diy-manual-videos-and-lin?ref=project_build
Cool but your construction is to weak ( your welds , screw who maintain the sprocket and the fork. ) But you are logic and it's well finished ! That's cool !
Estou montando um patinete com roda de bicicleta aro vinte.Edvandro do Rio de Janeiro Brasil
You should cover it with bottom panel. Debris and rock will damage battery and electronics and cover the motor on top.