Сзади надо дополнительно сделать стопор ,чтоб колесо случайно не выскочило ,надо сделать специальный ролик натяжении цепи (цепь со временем растягивается и может соскочить ) и обязательно цепь накрыть защитным кожухом + тормоза . А идея класс !
Идея гавно, мотор жрёт 7 кВт, а едет 62 км/ч. Для сравнения мотоцикл на моторе с постоянными магнитами и таким же потреблением едет 130 км/ч и разгоняется гораздо шустрее
@@rubenhayastan4854 не имеет значения) Можно поставить на этот самокат мотор 3 киловатта и он не будет выглядеть как - то не так, и занимать много места. При этом развивать скорость можно будет в районе 85 км/ч
the default cooling is just not enough. I use 75100 on my scooter too, and I 3d printed a new case just to stick some cooling fins on the mosfets. Planning to add water cooling in my next build.
I LEARNED HOW TO BUILD THIS PACK AND HAVE BUILT 350 PLUS OF THEM IT GETS EASIER WITH THE NEW SPOT WELDER THEY HAD ME SOLDERING BY HAND 3 weeks straight.
Was searching for how to build an electric scooter from scratch for my channel and came across this. Great video bro. Well done. maybe next time you can use plastic spacers between the batteries to prevent possible shorts if the rubber on them fails.
Can you give us an update? These RC motors tends to heat up a lot without proper cooling, how is yours? Okay about the controller temperature, but i am also worried about motor's. Especially in hillclimbs?
boss tanong ko lng kaya ba nang controller yung motor hub na 60v/72v 3500watts?.balak ko kasi ilagay sa fiido q1s ko boss para less space...at sakay last question boss..saan ka nakakabili nang lithium battery?salamat sa pag sagot..
Bro u need a chain tensioner maybe spring loaded at the back because the wear and tear after a while the chain could miss a cock and BOOM dangerous at any speed also I'd of gone for slightly larger motor considering the amount of batteries... also I'd have it water cooled also I'd have another motor as an alternator pumping electricity as a dynamo and solar panels on it while it sits in the sun recharging also...good luck oh also I would of used the batteries inside the tubing of the frame itself also...
Hi also I'm testing the 75100, I noticed that by running the hub motor with the battery cables disconnected, the controller still turns on and gives power from the 5v and 3v outputs, can you check if this happens to you too?
@@albertnario4877 Thanks for the reply, i hadn't thought about it, i have to try to disable the regeneration, it's not a great thing anyway, it would take a system to really leave it off, as it is now my tft display turns on and off every time i move.
IT'S FUNNY THE COMPANY I WORK FOR TOOK THEIR IDEA FROM THIS VIDEO I LITTERLY BUILD THE SAME THING FOR THAILAND SHIPMENT WERE PREPARING. THEY SELL FOR $499.00 us currency.
Incredible build mate! It's incredible how much power those little motors can put out, I'm looking into getting one for a scooter myself
if you still want to build something like this Id highly recommend a QS 90 mid drive about 2,76 times m,ore power than this and as cheap
The compact homemade car is very powerful. You made it very well. Thanks for sharing.
Glad you like it 😁
Assalomu Alaykum Uzbekistondan ota onanggizga rahmat boshqalar ham ulashganinggiz uchun rahmat ixtirolar va yangiliklarda charchamang omad
Small reverse spoiler over the controller directing airflow onto it perhaps. Great build.
Сзади надо дополнительно сделать стопор ,чтоб колесо случайно не выскочило ,надо сделать специальный ролик натяжении цепи (цепь со временем растягивается и может соскочить ) и обязательно цепь накрыть защитным кожухом + тормоза . А идея класс !
В чём идея, что первый раз электросамокат видишь?
@@hiwe4ka503 Человек сделал и на этом молодец .А ты дальше в космос летай ,может лет через 100 может придумаешь ,как на Марсе помидоры выращивать ?😀
Идея гавно, мотор жрёт 7 кВт, а едет 62 км/ч.
Для сравнения мотоцикл на моторе с постоянными магнитами и таким же потреблением едет 130 км/ч и разгоняется гораздо шустрее
@@ravedjmixes6495 согласен ,но мотоцикл это же не самоделка совсем другая категория .
@@rubenhayastan4854 не имеет значения) Можно поставить на этот самокат мотор 3 киловатта и он не будет выглядеть как - то не так, и занимать много места. При этом развивать скорость можно будет в районе 85 км/ч
the default cooling is just not enough. I use 75100 on my scooter too, and I 3d printed a new case just to stick some cooling fins on the mosfets. Planning to add water cooling in my next build.
nice job you manage everything from cutting, boring, electrical, and power using individual batteries
Ни
Has always been an excellent video to show how to diy an electric scooter! Thanks for review our fsesc 75100 foc , motor 6384 and spot welder!
Tt6
Funciona con una batería de coche?
@@antoniocano9473 It is ok for the battery voltage not to exceed 20s, please use it within the specification
@@FlipskyTech gracias
Galing! Pede ka na magtayo ng tindahan ng custom-made e-scooters!
Udah ku perhatikan beberapa rancangan mu
Hasilnya emang keren
Mantap
Request dong
Scooter 3 roda
Rear 2
Front 1
Biar lebih safety
English please 😅
@@albertnario4877
Indonesia please
😀😀
@Hariyanto
Biuuhh
Mehong juga
I LEARNED HOW TO BUILD THIS PACK AND HAVE BUILT 350 PLUS OF THEM IT GETS EASIER WITH THE NEW SPOT WELDER THEY HAD ME SOLDERING BY HAND 3 weeks straight.
We can work something together. How do we get in touch
the 48v was already in 5’s in parallel which means you could’ve just did 4 of the 5 parallels and made 72v (20s)
Wow, that contraption is genius ❤
The handlebar stem shouldn't be straight vertical.. try to bend it into a slight angle more like a bike, it'll be more stable and better for turning.
It was very good congratulations... I wanted one of these for real, it was better than the ones sold
Was searching for how to build an electric scooter from scratch for my channel and came across this. Great video bro.
Well done. maybe next time you can use plastic spacers between the batteries to prevent possible shorts if the rubber on them fails.
😢Привет 😢😅😂у 🎉😮🎉😅
😂🎉 😮😢😂😅😅
😂
Can you give us an update? These RC motors tends to heat up a lot without proper cooling, how is yours? Okay about the controller temperature, but i am also worried about motor's. Especially in hillclimbs?
Yes after a long time you are building e scooter again 😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀😀
I hope you enjoyed it.. 😁
4:52 simpleng motor mount, gagayahin ko~
So if i don't have all those materials just laying around, how much would this build run me?
Excellent! Where Should I get the Motor and the Battery? Thank you
Sir your video much helpful ,I like how you name also what materials you are using, thank u so much
Mahusay kuya Albert! Galing penge flipsky motor hehe😆
dalawa lang yn, hehe wala nako extra.😅
Então foi daqui que o Letra Jota copiou o projeto do patinete dele kkkkkk
You are a genius 👍🏻
I need one Do you sell online
nope.. 😅
Yes i need too
SO SICK MAN make more videos of scooters and yes
Você é um gênio, parabéns 👏👏👏
Buna ziua vreau și eu o Patinete cît costă Sint interesat
Оцинковку варит похеру ему ) был у меня печальный опыт думал сдохну температура как пизданула не пожелаешь врагу будьте аккуратны ребята
That's the beauty of Bataan. Nobody cares that 36v is the street legal limit
Hello, Flipsky 75100 has the erpm setting. What if you don't know the exact erpm of the engine? And is it necessary to provide the exact ERPM value?
Wow. Nice battery build.
Hey you think it's possible to put a drive chain motor in back and a hub motor in front, for dual action?
Idol another great... Turuan mo nako more power and god bless!
boss tanong ko lng kaya ba nang controller yung motor hub na 60v/72v 3500watts?.balak ko kasi ilagay sa fiido q1s ko boss para less space...at sakay last question boss..saan ka nakakabili nang lithium battery?salamat sa pag sagot..
Very nice, am gonna make one too 😃
Did you make it?
@@kingWisemon nope, my wife got surgery i had to take care of her, until now trying to get back up on my feet finacialy
that little motor had alot of power
Would be nice more detail setup on the settings on the computer can’t get the throttle to work right need help
Nice work. Can you help me to put the biggest motor for this vesc please?
Mag wowork sya sa BLDC na scooter hub motor? Saka may auto sensing pa din ba sya?
Panalo yung size ng 75100 ah
uo ok yung size nya, pero kelangan pa ng mas magandang cooling mabilis uminit yung controller
Need to add a chain tensioner
Nice build Sir!
Battery 72v. 26 000 mAh??
If my calculations are correct.
What bout range?
Bro u need a chain tensioner maybe spring loaded at the back because the wear and tear after a while the chain could miss a cock and BOOM dangerous at any speed also I'd of gone for slightly larger motor considering the amount of batteries... also I'd have it water cooled also I'd have another motor as an alternator pumping electricity as a dynamo and solar panels on it while it sits in the sun recharging also...good luck oh also I would of used the batteries inside the tubing of the frame itself also...
Why didn't you install the bms? Do you have any issues without it?
👍💪🔥👏
Угол наклона вилки маленький , больше трейл надо делать,
13:51 натяжитель цепи нужен .
good build...good choice of parts too xx
Sir your talented in electrical motors but first of all always stay safe in all of your work and rides
Sir.gdmorning, kung mag papagawa aku sayu Yan sir!Ilan ba Yung gasto lahat2x na sir?
Here can't I use 7070 Flipsky BLDC 4200w motor instead of 6384?
Can you please note the materials you Used all the details please
Please description (detail) part/part thanks
Please what is the name of the motor you use, how can I get it?
Hi where do you get the motor from? Im building an electric scooter as well. Thank you.
Hi also I'm testing the 75100, I noticed that by running the hub motor with the battery cables disconnected, the controller still turns on and gives power from the 5v and 3v outputs, can you check if this happens to you too?
when your regen is activated it will power it self from motor.. it bypass the SS switch..
@@albertnario4877 Thanks for the reply, i hadn't thought about it, i have to try to disable the regeneration, it's not a great thing anyway, it would take a system to really leave it off, as it is now my tft display turns on and off every time i move.
Will you sell one?
How you can recharge the battery sir ?
If I want to know the percentage of the battery what I can do?
how much ung total cost for the battery and motor? not including the metal parts?
Can not change sprocket tubed tryer there are some needed improvments
Exelente job .. no only...the millionar Elon musk.... can make electric vehicles....🤝👏👏👏👍
Galing nman Sir! Pwdi ba mag work sa inyo?hehehe👌👌
pwede nmn.. haha pano?
my mans did not reach 63 km/h sweet jesus i want one
can you please tell which material you used here for the base
and chassis
1.5mm 2x3 tube
Speedometer on karke record karke dikhana jara iska speed.
Lo que no se le vio es que anduviera en el ????????
Thanks for information about this idea 👍👍
really great! kudos sir
Thatcher motor is only 4000w peak? 12s so 48v max?
I'm wondering how long those welds will last.
This is a fucking bomb
The battery 🔋 if they be so hard it's gonna bombing 💥🔥
Never seen a motor that spinned, before.
It turns out very cool man
hi sir where did you order that flipsky complete set? thank you
description
Amazing Work. ❤❤❤❤ Super Speed 🎉🎉🎉🎉🎉🎉
I’d love to master your set of skills
It's awesome bro new generation scooter
Amigo onde eu compro esa ferramenta que vc usa pra escoadreja
NICE! just fixed the chain slackness.
I wanna build something similar that has 3x 72v motors with bigger wheels....
why would you use 3 motors.. you're just over-complicating things. you gonna use 3x ESC?
This model what company
you need a bigger stronger tires to handle the shaking
that chain looking like spongebob inflatable arms
ممكن لي أن اشتري منك وحدة مثلها إذا ممكن ارجو الرد
Can I run motor with heavy battery of vehicle??
IT'S FUNNY THE COMPANY I WORK FOR TOOK THEIR IDEA FROM THIS VIDEO I LITTERLY BUILD THE SAME THING FOR THAILAND SHIPMENT WERE PREPARING. THEY SELL FOR $499.00 us currency.
Oh really? What did you tell them? 🤣
Can you integrate in a generator to recharge?
motor it self is the generator you want, it has 600w of regen braking.
I think It overheated because no balance of energy; too much voltage and not enough current 🤔
Sir, ipapacostomize ko po sana kick scooter ko, magkano po
Seria possivel instalar um sensor de cadência?
next, can u make a 240V 150AH SCOOTER THAT CAN HIT 200 MPH AND HAVE A RANGE OF 300 KM?
Yaaaaasssss
El motor se puede comprar en Aliexpress?
Brilliant work
Magkano inabot ang gastos mo dyan idol?
Что это за софт для конфигурирования прошивки?
what is the maximum speed?
+1 inscrito no canal 😉👍 👏👏👏
Top demais. Parabéns
give me the link to buy motor
Boss magkano nagastos mo lahat jan project mo na yan?
The ZERO TORQUE mobile 😂
Add in a rear suspension!
Bisakah menggunakan motor selain flipsky????
Can you make wheelchair hand cycle for me