What idiot gives this a thumbs down. This guy takes what most would consider trash and make cool stuff with it. No $10,000 milling machine, no fancy tools. Just fun stuff with basic hand tools. I salute what your doing.
I have a few gas trimmers and old bikes that I don’t use them no more. I would donate them to this guy. I like the way he turns junk stuffs into a pierce of art. I’m always fascinating about building an electric scooter. After watching this video I have an idea of using the 58volt lithium ion battery echo trimmer to power the scooter, it stronger than many gas trimmers. You are awesome! Love to see another video from you.
You guys are brilliant really, with hardly no special tools you come up with this beautiful scooter and made from recycled bits and pieces well done excellent work again you guys are brilliant
This was too cool. It entertained my inner child. When I was a kid, I wondered what it would be like to put a chainsaw motor on a bicycle,, a 10 speed. Put the motor where the peddle crank is, keeping the back sprocket gear set for the drive chain to have the gear shift.
I rather liked it. Shows a good construction method. I like to go fast and all that but sometimes a gentle cruise to the corner shop would be nice :) Well done to this guy I say!
Bác chế cho tay lái gậ xuống khi không chay ghi đông thì để rời thế là gọncho vào túi để lên tàu xe gọn lúc nào đến nơi lại lăps vào chạy trong phố . Kha kha đỡ tốn tiền thuê xe máy mà lại là đồ mình làm. Quá hay em sẽ học bác
Makes it look so simple! People that have the skills to do this dont realize how amazing it actually is... or how cool it is... Building my tools up and skill level cant wait till i can look at a build like this and think " i can it in 2 hrs" lol
Dios los vendiga lo que me impresionó más que la patineta a motor, fue el corazón ❣ tan precioso y lleno de amor 💕 que an tenido estos maravillosos seres humanos al no solo compartir sy no en seńarle al mundo algo tan útil mil vendisiones los amo en cristo Jesús., saludos desde Tampa florida 🏖
What gear/sprocket did you use on the engine side. Building one of these now. And can't find a gear to fit over the weed sacked clutch shaft. If anyone know it would be greatly appreciated. Thanks
What idiot gives this a thumbs down. This guy takes what most would consider trash and make cool stuff with it. No $10,000 milling machine, no fancy tools. Just fun stuff with basic hand tools. I salute what your doing.
I love your comment ^_^
Dân cơ khí có khác, làm rất kỹ và chắc chắn.
Mấy kênh kia toàn làm cho có chạy đc 3 bữa. 😀
Thanks for the time you spent on the build ! and putting the video up .Your a master !
I have a few gas trimmers and old bikes that I don’t use them no more. I would donate them to this guy. I like the way he turns junk stuffs into a pierce of art. I’m always fascinating about building an electric scooter. After watching this video I have an idea of using the 58volt lithium ion battery echo trimmer to power the scooter, it stronger than many gas trimmers. You are awesome! Love to see another video from you.
nhỏ gọn, đẹp... đi học hay đi chơi lượn là bằng con này thì quá tuyệt vời
I find it cool that you are so good at welding thin stuff with a stick welder.
You guys are brilliant really, with hardly no special tools you come up with this beautiful scooter and made from recycled bits and pieces well done excellent work again you guys are brilliant
Молодец 👍хорошо придумал.Не хватает только защиты на цепь и шестерню двигателя ну и брызговики поставить.
Ý tưởng sáng tạo hay. 👍 cho dân cơ khí Việt Nam. Làm clip hay từ đầu lúc chế tạo cho đến sản phẩm .
Pro mechanic man, great job, nice idea👌
Còn khúc chạy test thì không hay. heee.....
We got us a young thomas edison here....outstanding job!!!!
This was too cool. It entertained my inner child.
When I was a kid, I wondered what it would be like to put a chainsaw motor on a bicycle,, a 10 speed. Put the motor where the peddle crank is, keeping the back sprocket gear set for the drive chain to have the gear shift.
Definitely the best build I've seen so far.
Very intelligent guy 👏🏾👏🏾
Sáng chế rất hay. Rất thẩm mỹ đẹp mắt
Super scooter. You are the best!
не смотря на китайские тапки я ставлю жирный лайк. умеет! могет!
Meski ku terlambat untuk menonton video mu
Tapi ku salut dengan inovasi mu
Semoga sukses selalu sobat
Terus berkarya
I rather liked it. Shows a good construction method. I like to go fast and all that but sometimes a gentle cruise to the corner shop would be nice :)
Well done to this guy I say!
Tuyệt vời.
7:30 nếu taro gai trong rồi vặn bù lon sẽ chắc chắn hơn.
Con bulon nhỏ không chắc bằng cây chốt đó đâu. Nếu mà tìm được cái phe gài thay cho sợi dây kẽm cột thì pro hơn ^_^
Ребята , вы просто МОДЦЫ...........👌👌👌
Чём тебе русский, не смотришь на ютубе.
Wow really good job compared to other diy channels!!
this is dope, waiting the electric version... wait, let me check your other videos 🥴thanks for watching ? nahhh thank you for sharing!
хорошо получилось, как фабричный. только под седенье пружину поставить чтобы помягче было. лайк
Супер! Приятно смотреть на такие вещи!
١
امجد Amjed
لم افهمك ماذا كنت تقصد؟
I love this guy's PPE, one left child's snow mitten and flip flops.
Another great project for my everlast welder. Thumbs up.
Your ingenuity and creativity astound me! Keep it up!!!
DENTRO DE LOS QUE HASTA HORA VI ERES EL MEJOR POR LA PROLIJIDAD DEL TRABAJO Y LA TERMINACIÓN QUE ESTA MUY BIEN TE FELICITO
🎶🎧😊😊Enjoy the making of the video, and music is very nice.
Sên với đĩa a mua ở đâu
Excellent build... WELL DONE!!! 10/10
Amazing...
What type of rim you used it?
Is that wheel barrow...
Bác chế cho tay lái gậ xuống khi không chay ghi đông thì để rời thế là gọncho vào túi để lên tàu xe gọn lúc nào đến nơi lại lăps vào chạy trong phố . Kha kha đỡ tốn tiền thuê xe máy mà lại là đồ mình làm. Quá hay em sẽ học bác
your diy gas skooter is my favorite out of all the others on youtube
Хорошая самоделка. Молодец автор видеоролика. Удачи тебе в творчестве! 👍
Great job.
Молодец! зачетная техника получилась!
Good job. Congratulations from Brazil
Bravo belle réalisation je vais prendre modèle pour en fabriquer une pour mon petit fils
The best homemade scooter build so far. Great work, you make it look easy.
Makes it look so simple!
People that have the skills to do this dont realize how amazing it actually is... or how cool it is...
Building my tools up and skill level cant wait till i can look at a build like this and think " i can it in 2 hrs" lol
Nice build, you don't want to go too fast on those tires whatsoever. Stay safe!
Very cool, I like and remind me of my childhood👍👍
Dios los vendiga lo que me impresionó más que la patineta a motor, fue el corazón ❣ tan precioso y lleno de amor 💕 que an tenido estos maravillosos seres humanos al no solo compartir sy no en seńarle al mundo algo tan útil mil vendisiones los amo en cristo Jesús., saludos desde Tampa florida 🏖
Wow, great job! This was built very well.
0903877125 mình muốn đặc mua
Просто браво рукастому. Молоток!
Sen bir sanatkarsın dostum eline sağlık çok güzel oldu süper
gracias por el video 📹 y la verdad es que es una buena idea y me alegro mucho por la gente creativa. gracias
Me.gusto.
Very nice.... love from Pakistan 🇵🇰
Thanks....
Cool scooter! I like it.
Nice recycling of other parts.Good work.
Great fabrication! Re purposing material on hand. Enjoyed watching full video.
Well done. Stay safe, Joe Z
Super cool best video I seen so far you guys make it look so easy ima try it
Fantastic job!
U r doing good job
What gear/sprocket did you use on the engine side. Building one of these now. And can't find a gear to fit over the weed sacked clutch shaft. If anyone know it would be greatly appreciated. Thanks
Настоящий,видно,йог-в сланцах варит,респект и уважуха!
тож прикололся ))
Trop bien ta trotinette 👍👍👍👍👍👌👌
We're did you get the sprocket at please let me know
SantaMuerte Mas Fuerte try your local bike shop and show them the picture of the size sprocket you need
your son just loves it great job great job what's next???
Very professional and neatly done....👌
finally, a decent chinese made product!
Exelent job guys making my own with the same engine
Galing!
2 thumbs up!
skillful work considering the limited materials. I hope you do an upgrade and add suspensions to it.
Nice build. check your chain tension, looks loose.
What whelee you use ?
Very ,very Good !! Like !!
What your engine use it?
is the disc brake is still works? even it is installed in the right?
What did you use for the shaft to attach the chain
Incredible work! I feel inspired & not afraid to do this myself! :)
1-st comment from is Russia 🙂
You are great!
very nice idea guys
отличная работа ! просто супер .хочется у автора спросить сколько времени ушло на создание такого самоката?
Just need to mass produce and your on to a winner with them welding skills and recycling 10/10.
Sao bạn chủ clip ko tận dụng cái tay gas zin của động cơ luôn, sẵn nút tắt nguồn nằm trên tay luôn, lắp bên phải vẫn ok
lúc đầu cũng định làm vậy nhưng khi lắp thì không được. Vì 1 lí do nào đó mà lâu quá mình không nhớ
Nice a job, looks like a scooter, it would be better with an adjustable angle and a rudder height
Very inspiring. Great video.thumbs up from me. Keep it up. :)
Đỉnh vãi nồi ra ông ơi🥰
Brazilian´s call it a WalkMachine, it made a huge success here in the 90´s .
I like your style 😎😎😎😎😎😎😎😎😎😎😎😎😎😎👍😀🤜🤛🤘🤘🤙
Cho mình hỏi bộ nhông xích đó của máy gì vậy, đamg rất cần câu trả lời của add, cám ơn nhé
Nhông nhỏ và xích là của đề xe máy, còn nhông lớn mình cũng không biết
Very good idea and job , thank you very much.
En nombre de República Dominicana felicidades muy buen invento mi respeto para usted.
Fantastique ! bravo .
Awesome build bro 👍👍👍👍👍👍👍👍👍👍👍👍
Where did you find your sprocket? i need something like that one
Động cơ cắt cỏ 2 thì chế máy băm chuối đc ko pro
Cái đó mình không biết
Nice Scooter!!! I like your safety shoes ; )
Đã quá à, thích !
I love this!
Any chance you can do a materials list and the dimensions of the various components?
Muy buen trabajo, te felicito
Brother, total respect for your ingenuity and craftsmanship.
Amazing and cool project.
Subcribed :)
Thank's bro! ^_^
Muy buen trabajo... Saludos desde perú 🇵🇪
Khéo tay quá chú ơi.
Good job ! Congratulations !
Супер!!! Молодец!!!
Если немного увеличить диаметр задней звезды на колесе, то будет лучшее сцепление цепи с грунтом
kkkk
Wow very good