How to Replace Rack and Pinion Assembly 1996-2002 Toyota 4Runner
Вставка
- Опубліковано 25 тра 2023
- Buy Now!
New Rack & Pinion Assembly from 1AAuto.com 1aau.to/ia/1AST...
This video shows you how to install a rack and pinion assembly on your 1996-2002 Toyota 4Runner. The rack and pinion assembly transforms the turning motion of your steering wheel to the push and pull motions that turn the front wheels of your vehicle, as well as adding the power assistance. If the steering rack on your vehicle is leaking, or damaged in some way, you might need to replace it entirely.
This process should be similar on the following vehicles:
1996 Toyota 4Runner
1997 Toyota 4Runner
1998 Toyota 4Runner
1999 Toyota 4Runner
2000 Toyota 4Runner
2001 Toyota 4Runner
2002 Toyota 4Runner
Tools you will need:
• Pry Bar 1aau.to/oR5/1AX...
• 17mm Flare Wrench
• 17mm Wrench 1aau.to/oUu/1AX...
• 12mm Socket 1aau.to/obpZ/1A...
• 19mm Socket 1aau.to/oaeu/1A...
• 21mm Socket 1aau.to/oaeu/1A...
• 22mm Socket 1aau.to/onU/1AX...
• Adjustable Wrench
• 1/2 Inch Ratchet 1aau.to/oaeu/1A...
• 1/4 Inch Ratchet 1aau.to/oa6v/1A...
• 3/8 Inch Drive Ratchet 1aau.to/obpZ/1A...
• Socket Extensions 1aau.to/obpZ/1A...
• Swivel
• Torque Wrench 1aau.to/oaBk/1A...
• Gloves 1aau.to/oYy/1AX...
• Safety Glasses 1aau.to/oRH/1AX...
• Drain Pan 1aau.to/oyt/1AX...
• Floor Jack 1aau.to/o2K/1AX...
• Hammer 1aau.to/oSL/1AX...
• Pick 1aau.to/oMU/1AX...
• Reciprocating Saw
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Thank you very much for this great video! I called the local dealership and their estimate for this job was $1800 which meant it probaly would have been closer to $2000. After watching your video a few times, I decided to replace it myself. With some patience and many references back to the video, I was able to complete the Rack and Pinion replacement on my 1998 Toyota 4Runner over the weekend. The part and tools needed cost me about $600. The alignment afterwards cost me $120. Thank you very much for the knowledge and the huge savings!
Well I did it. I replaced the rack and pinion on my 4Runner as mentioned here in your comments section about 3 or 4 weeks ago.
I literally had my laptop next to me as I replayed your video. Your torque specs call outs as you reassemble everything was indispensable and worked like a charm for me. My 4Runner came out great.
Thank you, thank you , thank you.
You are amazingly AWESOME.
+Florentino Rebuilding Co. Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
I'll be replacing the rack n pinion on my 2001 4Runner in 2 weeks.
I will use your video as my step by step.
Very enjoyable video. Very thorough....so I subscribed to your channel.
Being a mechanic and never doing one of these on a Toyota, your video is very detailed and instructive! Helped me do the job in about three hrs. Thanks for the video, and keep it up man!
Thank you for this series, it’s great to see a Toyota comparable to my northeast 02 Tacoma. The rust is strong w this one
Great video.
I just replaced mine, and I'd like to leave a few notes other DIYers.
Buy a return line end adaptor. I didn't because I excreted to reuse the old one. That mistake made the project take an extra day.
Go ahead and take both skid plates off. This simple move makes the powersteering lines more easily accessible.
Nice grips on the line
This was a good crash course for me. A few yrs ago I had my old ‘99 RR body mated to a younger, rust free ‘01 rolling frame. Bought a new rack & pinion, in the quote my shop claimed I should get new outer tie rods. From this video, I’m really not seeing why. But I see I can pick them up much cheaper than what they tried to charge!
The line is flexible
My steering wheel locks when i try to turn it
Great video! Very detailed. Excellent lighting and camera placement. One of the best I have seen. Thanks!
Thank you for your great video!
Is this for a 2wd or 4wd, is there any difference in the two?
Great video! A simple but very effective tutorial. Thanks!
All I can say is buy OEM on this one. Aftermarket ones don’t last. Think I paid around 600.00 for steering gear. Along with OEM tie rods. Got 265,000 on my 2002. I plan on keeping this Houston beauty a longtime.
Awesome video. Very very detailed on every step-by-step. We were stuck on the installation and you helped us through. For sure subscribing to your channel!! 👍👍
How did you know it needed replacement?
Are the torque specs the same for a Toyota Tacoma this year as well?
Excellent video. Thanks!
I also bought the VNSH holster. Looking forward to trying it out.
Can someone who has never done this do this?
Gracias ,thank you
Outstanding video thanku!
Excellent video...How may hour would you say it took you to complete the entire job I understand this is a video so an estimated time to do it? If an experienced mechanic were to do it, labor time? Thank you.. I am in the Houston area for any of you mechanic who knows how to do this and want to make extra money.
Im shopping for a Toyota tool kit to do this. Any recommentations?
Great video. Thanks for sharing it!
Do you guys do 2003 4runner or 4th gen 4runner rack and pinions? I would love to see you guys show us how to replace them too.
+@hmongBoYz We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-TRQ
Do y’all have a video on how to replace the charcoal canister on this model
+Daniel Martinez We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-TRQ
Don't need the wood wood
Good gob, thank
+@JoseGomez-tv4bb Thanks for the feedback! 1aau.to/m/Shop-TRQ
2:17. ... WHAT!? Are you doing Here??
Este man el mismo que saco dise que es nuevo solo le paso el espray cromado ahi semira clarito talbez el ule nedro le cambio
✌️☝️👍
Watching this made me cringe. So many things were done wrong it's pathetic. It would take me a half hour to explain everything. Do not try and do it his way!