BMW 1200 All Models ATLAS Throttle Lock Installation

Here are some tips for installing the ATLAS Throttle Lock on your BMW 1200 (All Models).
www.atlasthrot...
As always, feel free to contact us if you have any questions at all.

[@__Yannick__]

I am struggling with my F800GS. I have attached the throttle lock to the higher lip that is closest to the throttle grip, which feels like what was explained here - further away from the tube, but the lock has slipped off it a few times now also while riding which caused some issues. I imagine I am doing something wrong, as many people are using it and it works.
Have you got any advice to ensure the lock stays attached to the lip it's tightened to without slipping off - towards the centre if the handlebar and down into the lower part of the tube? I've tried tightening it more, but at some points it starts locking the throttle tube in place. When too tight..

[@ATLASMoto]

Hey! Reach out to us directly at [e-mail] with some detailed pictures of your specific grip and the gap in between it and the throttle housing. We'll take a look at this and get you helped out!

[@crazzei]

So I struggled with this as well, what I ended up doing was using the extra friction pads as a wedge keeping the throttle lock snug to the grip flange while I was securing it.

[@brendy7152]

Which friction pad do you use?

[@ATLASMoto]

Friction pad need will vary, but often with these grips you will need the thinnest or medium pad.

[@brendy7152]

@@ATLASMoto Thanks David. I put in the thinnest but I think I’m going to replace it with the medium one. The thinnest doesn’t hold it well enough.