I wasn't saying anything bad or negative to your setup . I ran the s 10 blazer setup up the spindle themselves are a M.F. I was trying to say it could other modifications to come cause I did run into more when I dropped the car down . Not trying to put no negative or salt on your Name my G. My bad I had run the stock calipers much love to you and yours God Bless keep coming with Info your much Inspiring 2✌✌✌👍👍👍👌👌👌
Damm Bro....forgot....iam building a Iroc z....iam personally building a 454 for it....taking out the 305....love ur vids....dont work 2 hard and keep the vids coming....love ya enjoy
Did you say you need gbody hubs for it to work? Or can you use s10 hubs? I’m trying to put c7 brakes on my Monte Carlo how do I order a some brackets from you?
Well if i can do this swap with the stock spindle and hub im game i dont mind the bigger center cap .. my thingbis the rotors i have on stand by the rotor is 13.5 from a 03 - 13 zo6 not 14 in
I adapted the blazer spindles to my 69 cutlass I had to reem the lower balljoint larger everything else bolted right up I have the stock blazer calipers and rotors for now til I can upgrade to the big brakes Only thing stopping me is I have the Oldsmobile “O” rear end with bolt in axles so I have no idea what brackets to get for the rear calipers
😳😳 first I've heard of the blazer spindles on that car nice !!!I'm working on a c5 corvette rear bracket for the BOP rearend with the bolt in axles I keep u updated on it
MR_getinthere for sure keep me updated on that bop setup that’s the only things holding me back right now from doing the swap I’m pretty sure I’m the only one that’s done the blazer spindle on the A body platform. But it was easy. I’d gladly show you what I did so u can add to your range of swaps
Where can I order the brackets from you. I need the front and rear bracket for a C7 on a gbody. I want to get the front and rear big brakes done from a c7
And your going to have to grind some of you A Arms to cause it hit against the brake caliper which well effect your turn ratios . Definitely gone need a wheel alignment and it a different ride height it lower my front so I gotta get different springs when it on the car and the weight it's on it you notice alot of modifications you run into
Thanks. I am replacing the upper and lower A arms and wanting the larger brakes to go with the update. I also purchased 18 inch gta rims so larger brakes are needed. Thanks again
@@Mr_getinthere I want you to build me a rear axle I pay you for it...... Hit my email... I emailed you... William74.wl@gmail.com... I shot you my phone number
I wasn't saying anything bad or negative to your setup . I ran the s 10 blazer setup up the spindle themselves are a M.F. I was trying to say it could other modifications to come cause I did run into more when I dropped the car down . Not trying to put no negative or salt on your Name my G. My bad I had run the stock calipers much love to you and yours God Bless keep coming with Info your much Inspiring 2✌✌✌👍👍👍👌👌👌
Good work man you explain it to the T!!! Keep up the A1 work!
Thanks bro
Yes ziiirrr I see you over there working bruh
The Ls Swap Guru yall twii helping me get thru my gbody build shout out to u for pointing out that derale trans cooler
Hey Mr. Getinthere
Instead of grinding the bracket down can you a thinner bracket that looks like 1/2" maybe something like 1/4"- 3/16.???
Damm Family making it happen...lot of Love 2 ya from Columbus ohio..
Thanks alot fam
Damm Bro....forgot....iam building a Iroc z....iam personally building a 454 for it....taking out the 305....love ur vids....dont work 2 hard and keep the vids coming....love ya enjoy
Need some for 88 cutlass front and back have anything set rest to bolt on
Did you say you need gbody hubs for it to work? Or can you use s10 hubs? I’m trying to put c7 brakes on my Monte Carlo how do I order a some brackets from you?
How would this work if your using the
wilwood 2 Piston calipers on a 73 impala?
Thanks man 😊JR 🇨🇦
Let me know if you need brackets
Can’t remember if you said it in the video or not but where can I get those brackets?
I sell the brackets
Well if i can do this swap with the stock spindle and hub im game i dont mind the bigger center cap ..
my thingbis the rotors i have on stand by the rotor is 13.5 from a 03 - 13 zo6 not 14 in
Rotors to wide .need c7 rotors yea I have a bracket for stock spindles
@@Mr_getinthere how do I get the brackets from you
Love these info videos, keep them (yawn) coming.
Thanks alot
@@ls87gbody 😂😂ik where it came from
will they work with the rear backing from the camaros on a gbody
I have 2012 SS Camaro Brembo brakes & blazer spindles & backing plates, I need all 4 brackets for an 87 SS Monte carlo, can u assist me?
good shyt,valuble info
Thanks i tired
Mr. Get in There when grinding do you use just a regular grinding disc or do you use
“Carbide Bits”
Grinding disc fam
I adapted the blazer spindles to my 69 cutlass
I had to reem the lower balljoint larger everything else bolted right up
I have the stock blazer calipers and rotors for now til I can upgrade to the big brakes
Only thing stopping me is I have the Oldsmobile “O” rear end with bolt in axles so I have no idea what brackets to get for the rear calipers
😳😳 first I've heard of the blazer spindles on that car nice !!!I'm working on a c5 corvette rear bracket for the BOP rearend with the bolt in axles I keep u updated on it
MR_getinthere for sure keep me updated on that bop setup that’s the only things holding me back right now from doing the swap I’m pretty sure I’m the only one that’s done the blazer spindle on the A body platform. But it was easy. I’d gladly show you what I did so u can add to your range of swaps
Where can I order the brackets from you. I need the front and rear bracket for a C7 on a gbody. I want to get the front and rear big brakes done from a c7
Front 145 rear 150 ,I sale the brackets fam
@@Mr_getinthere what’s your site? How do we order?
@@donkrida4sho you have PayPal??
And your going to have to grind some of you A Arms to cause it hit against the brake caliper which well effect your turn ratios . Definitely gone need a wheel alignment and it a different ride height it lower my front so I gotta get different springs when it on the car and the weight it's on it you notice alot of modifications you run into
Are u running theses calipers ??
Will this bracket work on the 2010 camaro ss brembo calipers
No i have a bracket for that camaro its 125 shjpped check my channel out i have a vid for that brake setup
You have these brackets for 96 caprice
Yea hubs 325 bracket 275
Are these the brackets that work on c4,c5, and c7 calipers?
Where do i order the brackets?
@@ChrisTheMobileMechanic are you using blazer spindles on a gbody ??
@MR_getinthere yes on my 83 wagon. Will this setup work with 17" wheels?
Have you tried the 2013 zr1 14” rotors
Opps spoke to soon lol
What about b body 5x5
If so how do we get in contact with
Getinthere.boys@gmail.com
Did you use tall ball joints or the factory size one? Want to do this to my Buick Gn . Thanks again
Factory but tall will work tho home equity better
Thanks. I am replacing the upper and lower A arms and wanting the larger brakes to go with the update. I also purchased 18 inch gta rims so larger brakes are needed. Thanks again
What year blazer spindals will I need I have 83 regal to covert to disc all the way around
98-02
Ok cool what you use for the rear.
@@mcredable custom bracket i make 125 ..or rear blaxer kit work too
Is there a number to reach you
@@mcredable email me @getinthere.boys@gmail.com or message me on ig getinthere_boy
That's alot to make this work
Its really not i just showed the good bad and the f ups lol dont run it then 🤷🏽♂️
What's good fam I emailed you... Could you put me together some of the vet rotors & caliber for my 85 Monte Carlo?
I dont sale rotors I only sale hardware ..wat u mean ??
@@Mr_getinthere I want you to build me a rear axle I pay you for it...... Hit my email... I emailed you... William74.wl@gmail.com... I shot you my phone number
I need them brackets and what brake lines do yoy recommend?
130 shipped for the brackets
MR_getinthere i need shipped to Chicago bro
@@Mr_getinthere I need the brackets bro ASAP
@@darnellsmith1140 they 145 now , got paypal ?
@@Mr_getinthere yes I do n do you have the back
Does this work for front and rear brakes?
I posted a vid on the rear a few weeks ago
@@Mr_getinthere that's what I need you know the name of your rear break video.?? Your work is awesome and very informative. Thanks so much. 👍👍