FMS - F7F Tigercat - 1700mm - Unbox, Build, & Radio Setup
Вставка
- Опубліковано 27 вер 2023
- bprc.me/FMS_F7F
bprc.me/6S_5000
bprc.me/AR8020T
bprc.me/NX10
SUPPORT US | This box contains affiliate links.
www.BrianPhillipsRC.com
bprc.me/Patreon
bprc.me/PayPal - brianphillipsrc@gmail.com
bprc.me/UA-camMembership
bprc.me/HorizonHobby
bprc.me/HorizonHobbyEU
bprc.me/TowerHobbies
bprc.me/ArrowsRC
bprc.me/BitgoHobby
bprc.me/FMS
bprc.me/FMSCanada
bprc.me/AMainHobbies
bprc.me/Banggood
bprc.me/Amazon
bprc.me/BuddyRC
bprc.me/Redcat
bprc.me/RTLFasteners
bprc.me/RCHackers
bprc.me/RCGoing
bprc.me/FairRC
bprc.me/TopRC
bprc.me/Creality
bprc.me/Titan
bprc.me/EBike
bprc.me/Furniture
bprc.me/Clothing
bprc.me/Solar
TX & RX
bprc.me/Tx
bprc.me/Rx
bprc.me/AR631
bprc.me/AR637T
bprc.me/AR8360T
bprc.me/LemonRX | amzn.to/34Zehs9
bprc.me/A3LRX | amzn.to/3yX2Mww
bprc.me/SkyID
SMART
bprc.me/SmartCharger
bprc.me/SmartBattery
GLUE | CA | KICKER | FOAM2FOAM | SUPPLIES
www.brianphillipsrc.com/supplies
bprc.me/FMS_Glue
bprc.me/VoltageAlarm
bprc.me/Servo
bprc.me/Forceps
bprc.me/LED_Kit
bprc.me/Iron
bprc.me/Mics
HORIZON
bprc.me/RealFlight
bprc.me/PlaneStand
bprc.me/150FX
bprc.me/150S
bprc.me/230S
bprc.me/330S
bprc.me/Fusion360
bprc.me/InFusion180
bprc.me/A10
bprc.me/AeroScout
bprc.me/AirTractor
bprc.me/Apprentice
bprc.me/Beechcraft
bprc.me/CarbonCubS2
bprc.me/CZ_Cessna150
bprc.me/CZ_Cub
bprc.me/Cherokee
bprc.me/CirrusSR22T
bprc.me/CitationLongitude
bprc.me/Commander
bprc.me/Conscendo
bprc.me/Draco
bprc.me/Duet
bprc.me/EC1500
bprc.me/Eratix
bprc.me/Extra300
bprc.me/F14
bprc.me/F15
bprc.me/F16
bprc.me/F18
bprc.me/F4U_Corsair
bprc.me/Fw190
bprc.me/Habu
bprc.me/Maule
bprc.me/Opterra
bprc.me/P39
bprc.me/P47
bprc.me/P51
bprc.me/PT19
bprc.me/Pitts
bprc.me/Radian
bprc.me/RV7
bprc.me/SportCub
bprc.me/SR71
bprc.me/SU30
bprc.me/T28
bprc.me/Timber
bprc.me/TwinOtter
bprc.me/Ultimate3D
bprc.me/UltraStick
bprc.me/Ultrix
bprc.me/V900
bprc.me/V1200
bprc.me/Valiant
bprc.me/Vapor
bprc.me/Viper
FMS
bprc.me/FMS_A10
bprc.me/FMS_ASW17 | bprc.me/HH_FMS_ASW17
bprc.me/FMS_Avanti
bprc.me/FMS_BAE_Hawk
bprc.me/FMS_Beaver | bprc.me/HH_FMS_Beaver
bprc.me/FMS_EasyTrainer
bprc.me/FMS_F15
bprc.me/FMS_F18
bprc.me/FMS_F4U_Corsair | bprc.me/HH_FMS_F4U_Corsair
bprc.me/FMS_F7F
bprc.me/FMS_Flash
bprc.me/FMS_Fox | bprc.me/HH_FMS_Fox
bprc.me/FMS_Futura
bprc.me/FMS_Maule
bprc.me/FMS_Moa | bprc.me/HH_FMS_Moa
bprc.me/FMS_P39
bprc.me/FMS_P40
bprc.me/FMS_P47
bprc.me/FMS_P51
bprc.me/FMS_PA18
bprc.me/FMS_PC21_Pilatus | bprc.me/HH_FMS_PC21_Pilatus
bprc.me/FMS_Pitts | bprc.me/Pitts
bprc.me/FMS_Rafale | bprc.me/HH_FMS_Rafale
bprc.me/FMS_Ranger | bprc.me/HH_FMS_Ranger
bprc.me/FMS_SkyTrainer | bprc.me/HH_FMS_SkyTrainer
bprc.me/FMS_SU27_J11
bprc.me/FMS_T28
bprc.me/FMS_Viper
bprc.me/FMS_Yak130 | bprc.me/HH_FMS_Yak130
bprc.me/FMS_Zero
TOWER
bprc.me/TH_ASW28
OMP
bprc.me/OMP_Bushmaster
bprc.me/OMP_Challenger
ARROWS | HOBBY ZONE www.brianphillipsrc.com/arrowsrc
DANCING WINGS | DYNAM | XFLY www.brianphillipsrc.com/bitgo
E110 bit.ly/3yVniit
E120 bit.ly/3OOmlOi
E150 bit.ly/3vHM7Le
E160 bit.ly/2DXmEGU
E180 bit.ly/30RKwE8
E200 bit.ly/3RemwEd
K123 amzn.to/2EerkpG | bit.ly/3PKg5r6
K124 amzn.to/3bqGF9F | bit.ly/34BaZXP
FW200 bit.ly/3LVXu9Q
VTOL amzn.to/2zwNvaV | bit.ly/2TTq4Qn
ASW28 amzn.to/3A8D5bS | bit.ly/2VlLtBm
Phoenix Evo amzn.to/3nX4okg
Spitfire bit.ly/3smaEWE
BF109 bit.ly/3rlrUen
T28 bit.ly/3398xse
F4U bit.ly/3h3OhNI
P40 bit.ly/3OTlUSK
P47 bit.ly/30hZiqN
P51 bit.ly/2JQDtDj
F22 bit.ly/39Zvf6r
F16 bit.ly/2YTmTKg
F16 50mm bit.ly/3Kga0Av
F18 50mm bit.ly/3mm9xSY
#rc #airplane #f7f
The panel line and ridge detail on that thing is really done well.
It is even better in person. Rare that a foam plane gets so dang detailed, and this one is one of our best looking planes! It's like Draco detailed, in my opinion!
Hey Megan... Some of us are dieing to have you give us a tour of your beautiful home!
I may not ever have this plane. But, i watch all of these for the great detail in setups, that i can use on a plane i DO have. These videos are chocked full of amazing ideas!!! 👍
Thanks Al - Glad you did, and glad you're finding value from these tid-bits. The F7F is excellent, but it's heavy, and NEEDS good gear...which is why it's so nice that the gear are AMAZING!!! ;)
Another excellent real life, been there done that walk thru. I've watched you for years. It's safe to say you are the goto for modern rc. Hands down best team on the net. But I have to say theirs something special about this video! What's different? Really nothing. Oh i get it! Love & marriage. It's the banter. A Legit handsome (if thats your thing, lol) talented, smart nerd man, working his a$$ off to be a good provider while living the american dream paired with a smoking HOT camera crew that is absolutely brilliant at showcasing her dedication, thru her filming, and acceptance of "foam friggin everywhere" in all seriousness thank you guys for all you do
Well said. Thank you for noticing ;)
They say flattery doesn't work - they lie - LOL!!!
Ha!!! I just asked about this plane last week. Thought it was an older demo and wondered why I couldn't find it on the website. Turns out I was a week early. Awesome. Thanks, Team Phillips!
For water tranfer decal you should use microset and microsol. It soften and draws the decal and improve addesion over highly irregular surface detail like rivets and panel lines , it also protect them
I heard this from another, and sounds like a great idea!!! I could have saved my other side nose art ;(...
could also use a HIQParts SQZ-1070 Decal Squeegee@@BrianPhillipsRC
that green "paint" is zinc chromate. its used on aluminum because it forms a chemical bond. you see it a lot on inside areas of aluminum airframes.
That BEC discussion threw you for a loop! You did the right thing by checking the voltage, I'm curious what It looks like under the heat shrink, I suspect that red wire is just laying in there not connected to anything. Reminds me of the old 4.8v NiCd RX packs back in the glow days. Some manufacturers used the same 3 conductor servo wires for their batteries, the "signal" wire wasn't connected to anything, and other batteries just had the red and black and only 2 pins in the connector. The FMS Tigercat used to be available in silver, when they re-released it they only offered it in blue. The La Patrona graphics are for the silver version, it was popular at the Reno Air Races years ago.
Love the battery anti slip mod. Never thought to do it that way. Now is my new thing. Also that power supply to the receiver I've never thought of. And could have saved three from esc failures. Yes you are educational. This is also my second build video that the M4 was the first. Got hooked from that one. I'm seeing a whole new side of your channel. Whi h has always been there I know. I've been enjoying the builds same as the maidens. Loving it.
I just got into rc flying at age 82 and have been watching your videos. One comment while watching the set up on the F7F. What would be helpful would be for the camera to be closer to the
tx when you do the set up.
Hello Brian, Just watched this video, very good job, getting some snow in Iowa. When I'm ready I will order the Tigercat through you, Thanks
You two should start filming in 3D if you're going to keep thrusting your rods in our faces like that!! (See time stamp 25:55) LOL!! What a beautiful bird you have their folks!! Keep up the amazing content and best of luck on you DAM adventures. I mean that in a nicest possible way. ;)
Thank you for your vote of confidence. Our dam adventures are going on RIGHT NOW!!! Just got some preliminary drawings back from the engineer tonight, and we're going to probably start breaking ground in a week or so, if permitting comes back successful. It's gonna be deep huge and wet - LOL ;)
Love this plane. I bought 2 of them. Yes its a little pricey but the detail and quality is just amazing. I fly off a grass field and its not as rough as yours but handles it with no problem. On youre decals go to Callie graphics. The wet decals are the worst i have ever tried to apply. On youre receiver i ripped out the reflex and just put a 8360T. The green is a anti corrosion that was applied back in the day. This plane is NOT new and its been around for a while but its almost always out of stock cause its so popular. I also just put a 6s 7000mah battery. Take off and land without flaps. Just bring her in on a nice flat approach and about 2 to 3 feet off the ground just cut motors and she will just glide right in and just touch so beautifully. Overall its a beautiful plane and always gets ALOT of attention at the field. BTW on the F4U Cosair just put a Hobbywing 120amp esc and set it to high and just wow its a whole new plane (8S).
Yes, yes, and yes! Thanks ;)
I have the same plane but with the bever motors and prop , whhhheeeee, hums
Very very cool guys! I’m going back to heli school!!
31,33. Answer- my apartment living room !! Great
VIDEO!
I have bought a used Tigercat got it all programed. My one problem is the left motor has the break on. I have read the directions and followed them. I can not get break turned off. Please help. I was able to program differential thrust even. With SAFE. you do the best video instructions ever.
In the wheel wells and alot of recessed areas had the green zinc chromate "paint". Used mostly for corrosion control.
Tu et un champion beau clip
Micro Sol and Micro Set for water slides. Decals that large will be problematic regardless. But those solutions will help conform to the rivets and panel lines, and promote adhesion.
Good idea, I just looked up how to do this, and seems it would have helped! Thanks for the tip!
You can soften already applied decals this these solutions and attempt to smooth them out. Several UA-cams on the subject. Plastic model guys are geniuses with it.
Excellent video, thanks. Add in a quick test of the Reflex 2. I know they are pretty solid, as are the Spektrum Rx when all set up... but I always check which way stabilization is moving. Cheers.
If we didn't, my apologies, we usually do that...I think our camera was dying - maybe that was what was going on.
I did not know that this is a contest , congrats
Not sure what you're talking about...
Answer of “ hey I m no 1 again” , do awk…..
Why the differential thrust mix?? You using that instead of just using rudder like when flying real aircraft? Why not just mix in rudder?
Hey Brian, is there any way to get ahold of you and ask you a couple of questions? Like an email or something? Having an issue with my umx timber evo that seemingly no one can figure out.
We have email in the ABOUT tab, but we don't usually encourage communication for questions like that there, it's more for business inquiries.
Ask away
Do you have a plan in case of a battery fire ? ... i like all the work and efforts you make to show all beautiful model ... for my part i buy a arrows edge 540 because of tou . 😂. But take care ... and i suggest a more secure place for recharge your battery... 😉... scuse for my poor english... im a french canadian.
Thanks, and sure, we have a few (3X) fire extinguishers hidden from all three directions toward the batteries, but to be honest, the best plan is to charge and discharge them carefully, but if there were ever a questionable pack, we would take them out back and deal with them...which we have done many times.
See you at Bigfoot!!
Can you explain why Horizon stopped making the ix12 and just release a 7 channel receiver? Leaving a GAPING hole from 10-14? Are they stupid?
Interesting point - but if you love COWS, you're set!!! ;) moooooooooooooooooooooooooooooooo ;)
1:06:05 My wife is smarter than me too Brian. It sucks. 😆🤣👊👊
Hey I'm #1 Again! 😜😜😁😎
just like Revell models... its so darn easy, i cant believe you dont know about "decals". Not stickers....
sorry you have way to many rc plans please send me one do you ever sell them when you get to many i would love to own a brianphilipsrc plane
you really need to slow down when you do the radio set up on all your air craft instead of rushing thru it.
There's a way to slow down the playback. Click on the GEAR ICON, then you can choose a slower playback speed to suit your needs. I understand we can sometimes go pretty quick, but if you want it slower, you gotta keep in mind, there's people who want it faster...we can only do one speed and try to strike a balance between too fast, and too slow.
@@thomasedwards629
Then, Brian sounds like he's been partaking in "grass ops" once you slow the video to Normal speed again. 😊
Why can't you just go thru the basic setup as set forth from the factory. All this rambling is unnecessary. What I am watching is an advance video. This video should be talored to basic setup if you are addressing an individual thats going to twin for there first time
Don’t listen to him with the differential thrust mix. Thats asking for a problem. If you want to add that kind of mix, just mix in rudder input.
"Green" zinc chromate primer used on aircraft aluminum. en.m.wikipedia.org/wiki/Zinc_chromate