Great video. I installed my 1st airdog yesterday on my 12v cummins. Super easy and great quality! ...although I will admit I installed my mounting bracket upside-down. Ooops rookie mistake lol
Awesome video guys , good explanation of the lines and what to hook up , my truck is different than any video I can find online and the instruction manual isn’t very thorough . I call air dog to order some more quick connects and in my conversation I mention I hooked up to the cooler and of corse the guy on the other end never said I’m not suppose to be on the cooler , go figure , gives me the impression customer service doesn’t want to be bothered and everybody to them is stupid . Thanks for the video
Wouldn’t it make more sense to flip the pump 180 degrees specifically for the 4g because the fuel pressure test port on the air-dawg is facing the frame and instead of having 2 lines loop around 180 degrees you only have one line doing that which would have the right angle fitting on it and the other two can utilize the straight 😅 just a little silly to do it this way but what do i know im no flow engineer
Could you just leave the factory line from top of tank but just plug it into the airdog instead of the fuel cooler. Woudk not need to fight on top of the tank that way.
I recently bought the FP 150. I specifically asked the vendor if the draw straw was optional. He said I did not need to install it unless I was running extreme tunes. If I am running mild tunes do I still have install the straw? Also do I need to delete or bypass the factory fuel filter head?
For the trucks that have the internal vent line, you will have to remove the whole filler neck, cut the outer hose only, and slide the vent hose though the center of the return tee upon reassembly.
Me too cause I'm confused on how the lines all go. If the lines are unhooked from the factory pump it would be pumping fuel everywhere. So I'm confused on it lol. Wish if just got the 165 but I got this brand new pump from a buddy for a decent price.
Great video. I installed my 1st airdog yesterday on my 12v cummins. Super easy and great quality! ...although I will admit I installed my mounting bracket upside-down. Ooops rookie mistake lol
Hey it happens to the best of us! Thank you for your support!
Awesome video guys , good explanation of the lines and what to hook up , my truck is different than any video I can find online and the instruction manual isn’t very thorough . I call air dog to order some more quick connects and in my conversation I mention I hooked up to the cooler and of corse the guy on the other end never said I’m not suppose to be on the cooler , go figure , gives me the impression customer service doesn’t want to be bothered and everybody to them is stupid .
Thanks for the video
And if I do install the draw straw how do the lines hook up on it?
Wouldn’t it make more sense to flip the pump 180 degrees specifically for the 4g because the fuel pressure test port on the air-dawg is facing the frame and instead of having 2 lines loop around 180 degrees you only have one line doing that which would have the right angle fitting on it and the other two can utilize the straight 😅 just a little silly to do it this way but what do i know im no flow engineer
Are you guys going to do a install video on the FP-100-FP-150 ? Duramax?
Nice video, did not catch the electrical hookup for the relay. how is that done and is it only for the low fuel psi light?
2009 lmm Duramax has red plastic clip at the fuel line. Any help with this would be great 👍
Much better install. More factory type to put on inside of frame in front of fuel cooler.
Would I need a sump or anything for my 2008 lmm?
Can you put a link to where you got those auto lifts?
Excellent product and great video!
What kind of oil are you using on everything? Just simple motor oil?
Could you just leave the factory line from top of tank but just plug it into the airdog instead of the fuel cooler. Woudk not need to fight on top of the tank that way.
Notice the break in the video when he disconnects the tank portion of the %*^&&&$&$ fuel line.
No hose clamps?
Will this lift pump make it more smoky? (roll coal)
I recently bought the FP 150. I specifically asked the vendor if the draw straw was optional. He said I did not need to install it unless I was running extreme tunes. If I am running mild tunes do I still have install the straw? Also do I need to delete or bypass the factory fuel filter head?
I am having problems removing the fuel line. I have sprayed pb blaster in there to loosen up the line but it will not move. Any idea's?
What does it cost
Hi, when you cut the fuel fill hose to install the return adapter, what happens to the inner plastic pipe?
For the trucks that have the internal vent line, you will have to remove the whole filler neck, cut the outer hose only, and slide the vent hose though the center of the return tee upon reassembly.
What's the difference between the 100 and 165 gph please
I have the airdog fp150 for my lmm, do I need to install the draw straw or can I do it without it?
Wish we had a supplier in Ontario
What kinda oil did you use?
Hello how much pressure do I put on my bomb for lb7 2003?
8-10 psi
I only got it to 15. You got a good trick for me to get it lower?
You are at 15 with the screw all the way backed out?? What truck do you have?
Great video guys!
Alrighty
I need the install video for the 150 with the drawstraw for duramax
Me too cause I'm confused on how the lines all go. If the lines are unhooked from the factory pump it would be pumping fuel everywhere. So I'm confused on it lol. Wish if just got the 165 but I got this brand new pump from a buddy for a decent price.
Same
Great video without the dumb music