Ender 3 V3 KE: Step-By-Step Unboxing and Build / Assembly - Creality Klipper 3D Printer
Вставка
- Опубліковано 3 жов 2024
- Unboxing Full Build of Creality Ender 3 V3 KE 3D Printer - THE most Advanced Creality Bed Slinger
Setting up this machine, is the same as in this video: • CR-10 SE: Setup, Confi...
Get Stuff:
Ender 3 V3 KE: shrsl.com/4d5zr
Nebula Camera: shrsl.com/4d7g4
Help this Channel continue to exist: Use my Links:
Amazon: amzn.to/2miGQq9
Creality: shrsl.com/424l2
Bambu Lab: shrsl.com/46lky
Sovol: sovol3d.com?sca_ref=2756755.r8WNQiJdNf
Sunlu: www.sunlu.com?sca_ref=4022320.F0sV6y4ht9
Send a TIP: Click the "💗THANKS" button, or Venmo.com/gregg-cerenzio
Become a Member, by clicking "JOIN", or this link:
/ @3drundown
Learn with me!
My 3D Printing Udemy Course:
3DRUNDOWN.COM
CURARUNDOWN.COM
BAMBURUNDOWN.COM
Support me via Patreon: patreon.com/3drundown
My "Must Haves" Amazon 3D Printer List: a.co/5RxTkYl
Upgrade your FDM Printers:
Get The Smart Kit Here: amzn.to/328eBDr
Get Cloud box, here: amzn.to/33fePJd
Get a Logitech Webcam Here: amzn.to/3JUpFFI
Get a CR-TOUCH Here: amzn.to/3oWhrnK
Capricorn Boden Tube: amzn.to/3FABHBp
Creality Official Metal Extruder: amzn.to/3JBeguj
Nozzle Cleaning Kit: amzn.to/3JsK307
Razor Tool, for easy Stubborn Print Removal: amzn.to/3pQ7Jnr
Find me on Facebook: / 3drundown
Find me on Instagram: / 3drundown
Find me on Etsy: GAETSY.COM
Have I helped you? Help ME continue this channel with some support:
TIP: Click the "💗THANKS" button
Become a UA-cam Member, by clicking "JOIN"
Support my Patreon: patreon.com/3drundown
Use my Affiliate Links when Shopping:
Amazon Link: amzn.to/2miGQq9
Creality: shrsl.com/424l2
Bambu Lab: shrsl.com/46lky
Sunlu: sovol3d.com?sca_ref=2756755.r8WNQiJdNf
Sovol: www.sunlu.com?sca_ref=4022320.F0sV6y4ht9
Support me via my Course: 3DRUNDOWN.COM
Clear instructions and always nice to see a video of an assembly, before doing it myself. Also, good to see someone taking care during unboxing and installation... many others who received the printer from Creality really don't care and yank it out of the packaging. Anyways, thanks for this. Good content. Just subscribed!
Once your all built, set her up with me also: ua-cam.com/video/akxZZ_spKOQ/v-deo.htmlsi=VaEqvrUDbjYwm5MT
I have this and its so good i printed a good quality benchy in 23 minutes. amazing printer very beginner friendly
printed in 14mins
Outstanding and very clear walk through of the complete unboxing and setup instructions. Love your style and humor throughout - getting my KE later this week and I can't wait to put it together!
Truth be told, I blew these machines off... I didn't believe in them. But, I started throwing stuff at them, and, they are really surprising me. The KE, is indeed, a great machine.
Don't miss my 2nd video, for Setup! :)
@@3DRundown I've already watched the entire playlist! Super super helpful and easy to follow. I feel quite well prepared to get started this weekend!
Thanks, Getting mine delivered today!!!
Thank you. Thank you. Thank you. I love that you are so precise. My Ender 3 V3 KE, the Creality camera, and 7 kg of filament are unopened and ready to be opened and installed. This will be my first 3-D printer. Thank you again for a clear, concise, precise, and well done video.
Catch my KE Setup video also! Welcome to the party. Thanks so much for the kind words. Means allot... ua-cam.com/video/akxZZ_spKOQ/v-deo.html
What we need, Thank you so much for the exact science on tune assembly 10stars😊
Have I helped you? Help ME continue this channel with some support:
TIP: Click the "💗THANKS" button
Become a UA-cam Member, by clicking "JOIN"
Support my Patreon: patreon.com/3drundown
Use my Affiliate Links when Shopping:
Amazon Link: amzn.to/2miGQq9
Creality: shrsl.com/424l2
Bambu Lab: shrsl.com/46lky
Sunlu: sovol3d.com?sca_ref=2756755.r8WNQiJdNf
Sovol: www.sunlu.com?sca_ref=4022320.F0sV6y4ht9
Support me via my Course: 3DRUNDOWN.COM
this is full of incredibly useful tips. i would have definitely bent the z rods when unboxing and wouldve never understood why it was so wonky. gonna be even more careful than i usually am when assembling. thank you for the video!
You mounted the run out sensor and filament mount bracket in reverse. The spool holder collar should sit in the negative space of the mount and the run out sensor should be on right if you are facing the printer.
There is no wrong way. It's mounted? Filament passes through? Cable connected? Done. I could mount the run out sensor on my ceiling, if I had an extension cable.
@@3DRundown I'm sure it works fine I was just pointing out its installed in the opposite configuration in the manual/set up guide. Seems to have a little more range of motion to move with the filament when installed on the right
I think you put the top spool holder frame backwards. The instructions are the other way around than yours... 😮
This is the way. All Creality official imagery has it forward, and the photo on the box itself has it forward. I also built their machines for them, at ERRF.... Forward. Even if they wanted back (they don't), I would overrule.
@@3DRundown I need to push on this comment. The picture as well as Creality's own online videos, manual, etc has it showing the screws facing the top belts. In other words, the screws are hidden when looking at it from the front.
Does the orientation actually matter?
I am returning one from Amazon due to defects, but it was running up until when I'm disassembling it for return. I had it oriented the way the manual shows without issue (issue was a bent extruder plate causing it to cant outwards. I bent it back but....don't want a new item to be askew).
I'm wondering what the different even is since the spool is facing same direction either way. Seems like it may be a moot point.
Thoughts?
May I ask what the reason is you advise to not use the USB but to buy your own?
They are cheap junk and FAIL.
Thanks for this video!
Have I helped you? Help ME continue this channel with some support:
TIP: Click the "💗THANKS" button
Become a UA-cam Member, by clicking "JOIN"
Support my Patreon: patreon.com/3drundown
Use my Affiliate Links when Shopping:
Amazon Link: amzn.to/2miGQq9
Creality: shrsl.com/424l2
Bambu Lab: shrsl.com/46lky
Sunlu: sovol3d.com?sca_ref=2756755.r8WNQiJdNf
Sovol: www.sunlu.com?sca_ref=4022320.F0sV6y4ht9
Support me via my Course: 3DRUNDOWN.COM
Why won't my printer complete the self test process? When I start the process it goes as far as moving the plate and extruder then stops and does nothing else. Help please
At this point, it would be preheating the nozzle and bed. Is that happening?
I had to rebox my printer. Thank you for this video.
My third print failed hard, and resulted in so much PLA globbed around the nozzle assembly that the whole thing is going back instead of waiting for replacement parts.
Removing the cover screws is three on the right, one on the left. Worth inspecting in there regularly.
Your nozzle was loose at the heartbreak. I would fix it myself, rather than return it. This happened to my CR10-SE (1st printer I have ever had this happen with). I know it's my fault, as I didn't inspect it after assembly, so, I will fix it myself.
@3DRundown Ouch. This one seemed more like it was stuck on prints that pulled up in my case, but I suppose I should check these things better.
When I return this printer and get a new one I will definitely do more disassembly and reassembly before using it. Apparently the build plate needs alcohol cleaning, too.
That could happen..... if the model leaves the print bed, and then sticks to the hotend, and the filament has nowhere to go, so it just builds up all around the hot end. Don't hate me, but.... that's also user error, and our fault. I almost did this on my V3 KE yesterday! Sometimes I get lazy, and forget to peak at the print. I just assume all is well, and..... DISASTER! Lol. Never trust your machines TOO much. :P Do IPA clean your bed. Being clean is the most important part. I am also not a fan of textured PEI. Smooth PEI holds so much better.
@3DRundown I was using black filament on my third print. I filled the bed with small pieces. It worked perfectly for about 6 or 7 layers, so I let it be. I came back a few hours later and it was destroyed.
You can call the print failure user error, but the printer eating itself to death as a result is definitely a design flaw.
I have 40 machines, THOUSANDS of prints. Never had this happen. It's 100% you. Why FILL THE BED WITH SMALL PRINTS? Sounds like a disaster waiting to happen. Especially if you used Textured PEI for loads of small prints.
Outstanding intro my friend
Thank you brother. These unboxings are so tedius. I always pray they don't bomb. (I'm looking at you CR10-SE)
Newbie here. Thanks for the very detailed instructions -- I needed that. Question: Is there any way to set up the KE so that it doesn't auto tram the bed at the start of EVERY print? (I would need specific steps to follow) Thanks again!
Yes, uncheck "Calibrate" when sending the print
Does the KE have an eccentric nut that should be adjusted? I assembled the SE for my nephew and it was there.
But now i am setting up my KE and it is not visible. Is it a different system?
THE KE and SE share the same base. However, the HOT END is on Linear Rails on the KE and won't have an Eccentric
I don’t get it I have a ender 3 v3 ke and I can’t get good prints at all so far the problem right now is that it doesn’t level good
KE is a nice machine. What's exactly happening? Is your bed good? Does it wiggle if you grab and jiggle it?
Really clear thanks
Welcome friend. Catch my SETUP video next. :)
yeah got that, was great also.
Hello! Do you have have a prusaSlicer profile for this printer or have any video explain advanced settings for this one? I look your courses, but no found.... Thanks : )
Hi. Sorry, I do not. And yes, I have no content on Prusa Slicer. I really want to cover all the slicers, allot more, but, I'm only one person, and it's very very hard, to find the time. I will try. You can give this a try for your KE. I have not tried it myself: github.com/eb2292/enderv3ke-prusaslicer
@@3DRundown Thanks a again.... 🙏
At 4 min and 30 seconds, I've gotten tired tossing around. Realy tired
just a question, according to the instructions, the run out sensor bracket is installed the other way around... I double checked after the cable wouldn't reach with the orientation you have it :)
Should be facing front, arrow down. It comes pre attached. Mine reaches easily. Official photo's show it on the other side, but that's an error, it comes mounted as seen here, and there are no mounting holes on the opposite side
Hello! I have an ender 3 v2 Neo, since i have a lot of problems leveling the v2 neo I want to replace the v2 neo with an ender 3 v3 Se or Ke. Any recommendations on which one sould i buy?
Definitely the KE. It ships with the Nebula pad, which runs Klipper, and in 2024, Klipper is what you want.
The peace of plastic with 2 holes that holds the cable , you flip it
Which one?
You installed the L shaped wrong, It should be installed facing the other side😅
But it doesn't matter much, it works that way too
Spool Holder faces the FRONT of the machine. It literally shows that on the packing Box. 😜
@@3DRundown Yeah😅
I just finished assembling my KE by following your video. It was not the first time that I was watching it but because I was actually doing it myself I figured out that.
Thank you for this detailed video. Following the video was much easier than following the written instructions.
And thank you for some tips like using the edge of the table for fastening the gantry's screws, it was helpful and made the process easier and safer👍
I have the k3
Arriving today. How
Do
I connect it
To my computer, what software should I use?
Creality Print, it's available from their website. So long as you connected the printer to your wifi the software will find it on your network.
I will be shooting the full setup over the next few days. You wil print via Creality Clour, or direct from Creality Print. If using Orca Slicer, you will upload to Creality Cloud manually. If using Creality Print, you can upload to Creality Cloud, directly from Creality Print. You can also print via the Klipper Interface, but, I would use Creality Cloud. You can follow this video, the process will be virtually identical:
ua-cam.com/video/24m_OaXyCBc/v-deo.html
Excellent video. I've been having some problems with Z rod binding. Are those "grub screws" at 10:46 what I would try to adjust to help with binding?
Oh boy. Z-Binding is not good. Possibly the left and right Z-Rod are missaligned. I hate to give you wrong advice. It IS a grub, but, the fitting is unusual. On the CR-10 SE, it has the more commen fitting, with the 2 grubs, due to it having TWO Steppers, where the KE has only one. I would have to look into the best way to address that on the KE. For now, email CS@CREALITY.COM, and explain in very plain english, what is happened, and ask them to tell you the correct way to resolve.
Thank you so much
Welcome. Feel free to join my group and post a video (it's new and has no members yet...) facebook.com/groups/ender3v3ke
hi.. so... I just bought mine
ender 3 v3 KE and I'm facing a problem... the BLtTouch (that Zoffset sensor) is hitting the part... it's a few millimeters below the nozzle, how do I solve this? I already took it apart and put it back together again and nothing, has anyone ever experienced this?
Weird. I have not heard this one yet. I'd wager a guess that the Nozzle is somehow too high. I have not taken the hot end apart on the KE yet, but I'd see if there is a way to lower it a touch
@@3DRundown
I just discovered that this Cr touch (I found the correct name) was mounted about 1.5~2mm after the nozzle, how do I solve this? Is the hotend mounted incorrectly or cr touch?
I am not sure the mount for the touch allows for a height change, so, I question the hot end... I will try to have a look at mine
Updates... I went through a level and square and the printhead bracket is actually bent, and the hotend is mounted crooked (because of the bracket pushing forward, making it crooked), I've spoken to the bracket and they will send me the new parts... I had another resonance problem because the structure is a little crooked and wobbly (despite having tightened everything correctly) using a square, the ends of the supports were cut crooked.... fortunately the support will fix this, for those who have the same problems, check these parts, it is very likely that they are crooked or cut incorrectly.
Just got mine setup. First prints have not been good lol. Very stringy and not layering properly. I also can’t figure out why my print speed is stuck on 100% I want to slow it down some. Is this not possible through the creality app or on the nebula pad itself?
Sounds like you need to spend some time learning to slice. 100% is not a speed. It's 100% of the speed YOU set, when slicing your model.
Slicing your first STL with Creality Print - Let's print a Test Dog on HYPER PLA!
ua-cam.com/video/X_6AmIQMvzU/v-deo.html
@@3DRundown you’re right. I was downloading models specifically made for my printer and just shooting them over wirelessly. Only “slicing” I did was to rescale them to a smaller size for a couple of them! I just finished a print in place articulated dragon and it came out good! I’m getting the hang of it
@@3DRundown this is perfect. Thanks
Yea, strongly suggest avoiding GCODES made by other pepople, as tempting as that sounds. BE IN CONTROL. Learning to be a skilled slicer user, is the best thing you will ever do. Better than getting a new printer. :)
Why are you setting all the tools and stuff on the bedplate??? You need to keep that plate surface clean and free of scratches.
And as i type this you start saying not to put anything on it..haha
I'm reading this going, DIDN'T HE WATCH THE FU*&^..... there it is! 😂😂🤣👍🏼
@@3DRundown
Good video. I literally set my KE up an hour before watching this video. I did a good benchy boat print too.
Next i gotta order an enclosure but how do i extend the control pad outside the enclosure? Is there a wire extension I can buy?
Ah, missed you by an Hour. Ironically, I started the upload. Setup all the details, then...... CLOSED MY BROWSER and went to the Gym. Lol. The upload stopped.... And I had to do it all over again later. My bad. Solid question. This was easy, when using USB for Sonic Pad. We'll need a serial extension. I'm not sure if it's something standard or propriatary. I am going to ask the engineers at Creality.
@@3DRundown thanks man. And i dont see any enclosures that specify compatibility for the KE either...would probably just have to go by measurements.
Also the sonic pad doesnt list as being compatible with the KE either.
I just ordered a dual filament dryer, a role of PETG filament and the creality nebula webcamera. I had bought a Mintion Beagle camera thinking it would work with the KE but it doesn't.
Most of the enclosures are generic. They tend to be sizes on purpose to fit the 220x200, 300x300, etc, bed slingers. I have 2 here to test, but have been dragging my feet. I'll do it this week
man.. that is a 3d printer... no a basket of eggs... if a grown person dont know how to take a piece of metal out of box should not be assembling a 3d printer.. :)
Ok Grandpa. Back to your Bingo