How to fixed, un jammed, first aid or repairs your Hasselblads, you may needs to know this
Вставка
- Опубліковано 3 лют 2021
- www.hassypb.com/category/serv...
Step by step how to first aids your Hasselblads that jammed by yourself
Repair or fixed cost to un jammed your son just with the $5 Screwdrivers is possible, just following this video
#Hasselbladjammed
#fixedhasselblad
#กล้องแ - Навчання та стиль
good video, but if people want the Third level fix shown a bit slower, and two or three goes, try a channel ANNIE7B she does this very slowly, so you get the mechanics of it, and gain some confidence!!
Dear Andy ❤️❤️ Thank you so much for your comments and sharing, The territorial try to explain to newbies or first camera jammed accidentally, To understand how they’re going to do with their cameras, It’s not exactly fix tutorial, So I tried to explain slower as you are mentioned, Anyway I hope this video is helpful for someone or somebody who can’t be found anyone can help them at that time when the camera is jammed 😃😃 Many thanks again dearest ❤️❤️
@@hasselbladexpert yes, a timely video, and a fantastic "fix it" solution, esp if you have never known about how they work before, but it does intimidate some, if you just read it in a manual, or on a blog, and that "parts" piece to show without the low light of the camera innards; shows exactly what is going on; but one suggestion, to put a plastic sheive on the screwdrivers, to minimise any damage to the internal parts from accidental contact. one thing you didn't cover, though was how to tackle a non or miss feed ( a mag that won't advance-by the BIG crank), as I have come up against this too, and also mention, the MAG won't allow use of the SMALLER winding crank/spindle until the first shot is advanced to number 2, then the "wind_off" feature works!! ( this differs from the H-system, there it is via a button which commands a "CONFIRMATION" dialogue box, the rest is done with the onboard motor drive; the V-system, however can wind_off at any time after shot 1, but by manual advance), the ARC and Flexbodies can also wind off any time, as they have NO coupling to the shutter or other bodily functions, just a safety lever to stop jarring the crank accidentally.
@@andyvan5692 ❤️❤️Wow Andy, Thank you so much for making this video complete for everyone who starting to fix or unnamed the camera by themselves to understand, I think it’s very useful to everyone who have been reading your advice or mentioned carefully before they fixing them ❤️❤️ Thank you so much for your time and have a wonderful moments with your photography dearest ❤️❤️
this video saved me!! you just earned a subscriber with your calm explanation, no fuss. absolute miracle. thank you
Oh dear..!! So glad to hear this video is can help you sir, your feedback and kind words most appreciate, thank you so much enjoy your days with photography and family dear friend 😍😍❤️❤️
Dear John, thank you so much for this video. Please may I show my humble appreciation, it greatly helped me and got my camera working
Hey Tich!! great to here you can continued to capture your wonderful moment with your loves and beloved Hassy dear!! Thank you for feedback and good news make me happy to be a small part of your favorite and works, photography!! Have a great shot and great time, Tich, cheers!!
I just wanna say: I had a really important project and the 500c/m’s lens got stuck and I followed this tutorial the morning of my shoot (as a last resort) and it worked!! I was able to use the camera after all. I’m so happy How-To videos exist - thank you for making this!
Oh dear..!! You’re the raining storms that pouring to the driest desert ❤️❤️ Thank you so much for your kind and encouraging words, Glad to hear this video help a lot, Keep up the greatest work friend❤️❤️🙏🙏
Worked for me after I sent it to a technician and they told me it may be $200 to fix I removed the lens with your helpful instruction thank you!!
Oh.. wow..!! ❤️❤️ Nice to hear my video can help you dear friend 😍😍 Thank you for sharing your experiences that this video still works and helpful ❤️❤️😃😃🙏🙏
...wie schön doch eine hasselblad mit ihrer Technik ist einfach super...
Hallo, Adam, vielen Dank für Ihren Kommentar. Ja, die Hasselblad-Kamera ist so intelligent und schön
Ho pagato 230 Euro da un tecnico Hasselblad.. Perche' Mi si era bloccata la macchinari fotografica come nel tuo Video.. Grazie di averlo spiegato👍
Oh dear!! Now you no need to pay him for the second time again, I think
Enjoy your shooting Cladio, Have a wonderful time dear friend
😁
Thanks so much for this video.... after it jamming on Victoria Peak in Hong Kong I was able to watch this video and fix the jam on the spot.... Thanks!!!
Dear friend, Your feedback most powerful to me, Cause I have this problem before, so I’m make decision to do this video to help friends who have the same problem and still on the job, so they can fix it and can continue and enjoy theirs photo shootings, Thank you so much for your kindly comments and sharing your experience that can really fix it friend, lol ❤️❤️🙏🙏
A little help with some asmr mixed in hahaha great video!
Yes, 😆😆😆 loved to heat you enjoyed the video, thank you so much ❤️❤️😃😃
Thank you Khun John for this other important first aid video. It shows the way and
, on top of all , gives confidence that our beloved gear still has a good chance to be fixed … even if sometimes it means a visit to a technician 🙏
❤️❤️ I’m so appreciate your kind words, And feel great that this video is good instructive for the first aired, Many things again for your comment and have a wonderful time dear friend ❤️❤️❤️
Thank you my husband works now
Wow!! so glad to hear that either your Hasselblad or Husband works!! lol,
Thank you so much for your feedback friend, appreciates a lot, John
ทำตามขั้นตอนที่สอน แก้ปัญหาเลนส์ติดได้เลยครับ ขอบคุณครับสำหรับคลิปนี้มากๆครับ
ดีใจที่วิดีโอมีประโยชน์และค่าช่วยแก้ปัญหาเบื้องต้นได้ครับผม ขอบพระคุณที่ช่วยแบ่งปันและยืนยันว่าคลิปมีประโยชน์จริงนะครับ 😁😁❤️❤️ และขอบคุณที่ติดตามรับชมครับผม
i hope that will never happens to me
but now i am not completely helpless
thanks for showing
Dear Charly, Many thanks for your stop bye and always left a nice comment, Wishing it’s will be never been happen to you friend, Staying safe and healthy dear ❤️❤️
Beautiful film and production. I need to check this channel more often. Happy New Year, good health to you and your family. Regards, Rafał.
Hi Rafal, Thank you so much for your kind words wishing you have a great Health and your family as well, Thank you again for your nice comments, best regards ,John ❤️❤️
Good video. Love your work Sir. Salam.
Dear Sallam, Many thanks for your kind words and encourage, Have a wonderful time dearest, cheers..!! lol 😎😎❤️❤️
Thank you for sharing, it’s very useful for every one who love hasselblad.😍👍
Thank you so much for your nice support and cheerful ❤️❤️
Thank you!! So much
Loved to hear your comment and feedback, thank you so much too friend, ❤️❤️❤️
I bought a special tool for this after I bought my first Hasselblad recently, but I'm not sure how it works and feel a little bit hesitant to do this. Now after watching your video, I'm pretty confident now. Thank you!
Oh dear friend! your comment most powerful and encourage me a lot, thank you so much, I'm pay attention to do this clip cause I want any friends who have this issue as same as me, so they can primary first aid themselves, I'm quite sure it's work! I'm so sad the see someone dislike this clip, but hopefully they are best luck and never been found this problem forever :D Thank you so much again dear friend, John
@@hasselbladexpert Sadly I'm the unlucky one. Just practicing this technic at home and the auxiliary shutter doesn't return properly, I'm sending it for a repairment. But I think it's good to notice this problem now rather than during a photography trip!
Thank you!
You are most welcome ❤️❤️
So glad to hear this video a bit helps sir 😍
Great Vlog, thanks for sharing
Hi Tony, thank you for your comment ❤️❤️
Thank you for tecahing!!! Best wishes !!!
Hi friend, Nice to hear your comment, thank you so much, have a nice and wonderful weekend,
Excellent information! Thank you!
Thank you so much for your comment friend, ❤️❤️🙏🙏
You're welcome!🙂
Great video! Alway worry about this happen to me.
Hi, worry free dear nice, there is one video for protection before its jammed
ua-cam.com/video/SMAZjIwlpJ8/v-deo.html
Thank you for your sharing :D
love story
❤️❤️❤️ Yes sir, it’s all about our Hasselblad loved stories 😁😁😘😘 Thank you for your comment
Very nice video! I followed this method to remove a stuck lens, but one of those two little screws just wont turn at all. Not sure what else can be done in this case.
Hi, thank you so much for your feedback, looks like you need the technician to help in the next step, I don’t know why the baffles doesn’t turn down too ✌️
So are the first aids doesn’t help
Hope you find the best technician to assist you dear friend ❤️❤️
if I have some problem may I sent you to fix it for me please.
For the Hasselblad specialist and serious user like you, I m welcome 28 hours a day please..!! ❤️❤️
Hello, thanks for this good video, I want to know the size of the the scew diver.
Thanks
Oh dear..!! Such a nice question..!! Thank you but I’m sorry for no any idea about the screw drivers size
Anyway, please buy the multiple sizes that they sales in one box, So you’ll be know which one will be fit that Hassy gears, by the way you can be use these screwdrivers for other fixing purposes, Thank you so much for your sharing support and back up, I’m appreciate a lot ❤️❤️
@@hasselbladexpert
Thanks for quick answer, I wonder if you have a video about reparing Hasselblad magazine that not stop at nr 1 automatically.
Thanks for answer.
@@fluddakia786 dear nice, l’ll do the video about your inquiry soon dear 😍😍 will let you know through this video chatting ❤️❤️ Thank you so much again, Have a wonderful day ❤️❤️
Very nice video. Can you help me with a problem? My 500CM and I cannot turn the film roller key in my magazine A 12. It also means I can't add a new roll of film.
Oh! dear, so sad to hear this, it's looks like some parts stuck inside your film back! you can't pull off the insert out from the shell back right? if it's sound like this? remove your dark slide out from the film back, then use your fingers depressing the inset and try to separate the film insert out from the film shell, then try to winding the film winding crank in clockwise, if it turn smoothly that's mean the shell is okay and working well, the checking the film insert, finding the abnormal part that made it's stuck and doesn't pull off smoothly, looking to hear from you friend, cheers!
What do I do when it opens abnormally 😬 it’s opens really slow and won’t click into place unless I poke them
😃😃 Nice to hear that it’s click into place by your finger tip 😍😍
Thank you for sharing dear nice guy 🥰🥰❤️❤️
😎👍👍
Thank you so much son 💕💕❤️❤️ Love to see your comment 😘😘
Can you help me how to fix it,, my hasseblad 500cm doesn’t want to record (exposed), the film always blank no captured at all.
It’s looks like the problem may be with your lens..??!! The speed doesn’t work at all duration time, Do you live in Thailand or in somewhere else, If you live in Thailand I can help you my fixing your issues 😍😍
Hello, I need your help) I have a Hasselblad 500, the problem is this: the curtain opens very slowly (about 2-5 minutes) and closes just as slowly, I can’t understand what the problem is.
Hi my friend
Thank you so much for your question and inquiry to know what’s happening with your shutter curtains, from my experience I think it’s needed lubrication
The main spring to control this auxiliary shutters need to be reset, please taking your local service if it’s higher than US$150 please let me know
This cost is including return shipping to you
Many thanks again
Happy new year to you and family, my friend, John
HELLO
Last week one lens got stuck, but instead of pushing the curtain manually to access the screw and wind it to loose the lens(as you did in the video), I stupidly push the mirror lock up button to get it out of the way.......as you can guess, now I'm really stuck.
I wonder if you have any advice on how to get out of this? I can handle a mid level repair
THANKS IN ADVANCE FOR ANY HELP.
Oh dear!! so sad to hear this, I'm not sure what's your camera model that got stuck. it's 500 series? or 200 or 2000 series
However in this video quite good explains and demonstrates
anyway for faster assist please add my WhatsApp +66825669562
we can sharing some video for how to fixing it
Thank you for asking, John
@@hasselbladexpert THANKS SO MUCH FOR YOUR ANSWER....The Model is the 500 c/m (exactly as the one you show in your video-same winding knib) I'm going to add you to the whatsaap contacts. thks so much. Ricardo
@@harlhequim My pleasure Ricardo, so glad to assisting, Cheers!!
Hi, I have got a Hasselblad 2000 with the shutter plane missing or still inside the camera, can you give me an good address that you know that can fix it ? Budget for that would be around 250-280 $
Best regards
Olivier
Hi Oliver, so sad to hear you’re got an issued, but don’t worry yes, I can fixing your gear,
For replacing and tuning the shutter curtains, it’s cost about 180 to 220 US$ return shipping and customs tax doesn’t included
Here is my contact and address
Hasselblad repairs and services (John Kasawa)
48/284 M4 Sereethai alley 41, Sereethai Road
Klongkoom Bungkoom
Bangkok
10240
Phone +66825669562
My WhatsApp +66825669562
Thank you again and please keep in touch Oliver
John
Recommended this shop for fixing with confidence >> Fast >> Cheap >> > Cheap >> facebook.com/groups/1055347605674608
230€ 😂😂😂