How To Connect An FTDI Adapter To A UART Port
Вставка
- Опубліковано 23 жов 2017
- FTDI Adapter: bit.ly/1SjlENF
Drivers: www.ftdichip.com/FTDrivers.htm
Mini USB To USB cable: bit.ly/2yIiApW
My FPV GEAR:
Goggles - FatShark HD3 - bit.ly/2eX6izM
RX Module - Furious True-D: bit.ly/2uH4Gzj
Radio - Taranis X9D- bit.ly/2mfFmQn
Battery Charger - ISDT D2: bit.ly/2vcDZoN
Geekcreit® FT232RL FTDI USB To TTL Serial Converter Adapter Module For Arduino
Description (From Banggood):
Chip: FT232RL
Draw out all signal port of FT232RL chip
RXD / TXD transceiver communication indicator
USB power supply, can choose 5V or 3.3V, set by jumper
With over current protection, using 500mA self-restore fuse
Pin definition: DTR, RXD, TX, VCC, CTS, GND
Pitch: 2.54mm
Size: 36 x 18mm (L x W)
Interface: Mini USB
Package included:
1 x FT232RL USB to serial converter module - Наука та технологія
May use this for my Carbonstar build. Thanks!
Thanks Gal... Never knew something like that existed. I have a couple of boards I want to try that on... Rock on..
My pleasure mate.
Simple, precise and very helpful video
I am glad I could help you out.
Hi. Can I connect the FTDI adapter to a PC only to confirm the correct operation of the mini usb port and the driver, without the FTDI adapter being connected to another equipment?
Really good...!
Thanks for video, will this also work on my f405 wing thats already flashed with inav but now broken usb port?
Yes, there is a way to use it in order to repair your FC as far as I can remember, though I haven't tested it myself.
Good one M8 !!
+Tobacco eXtreme Thanks buddy
I have exactly the same FTDI for minimOSD, but it is totally faulty I think ...
I tried to install a lot of FTDI official drivers, but not any of them are working, the adapter is not recognised
Hi! Do you knoe how can i connect the 3 pins (Ground, V+, Signal) of a PWM receiver to this adapter? I don't know where i have to connect the signal pin of the receiver. To Rx or Tx or both?
What is white color cable?
GND / VCC / RX / TX ...
But is it possible to do with already torn off USB ? If UART wasnt set to MSP before it fell off?
As far as I know, you will need to build a custom version that has the MSP enabled on tge desired UART port.
Well I guess this one goes into the garbage then :D
It happens. I have a full bag of dead FCs and ESCs...
Kremer FPV got the replacement from airbot, surprised how esc can be three times more heavy and FC twice lol. I'm afraid to use cheap parts now
Thank u so mich for this Video , i have a question and need your answer , i am trying to connect my Cash register to my Laptop but it does not work , i have bought rs232 Cable usb bevause the cash register habe only Rs232 , the question is , do i need for my Laptop this FTDI ? do i need other Connection tools to can see my register cash and to connect it with my Laptop ? or what u think is the problem ? thanks für an answer
You're welcome.
I am sorry but the question is too broad and depends on the interface of the cash register. Maybe it's better to contact the manufacturer and see if they can help.
is dis possible to be used on GSM module to be connected on my pc?
Sorry but I don't know.
In the 2:14 you connect FC to betaflyght without adapter,to switch on n'3 port... How could I do that if my usb doesn't work. I brought the adapter because that.
I'm currently searching for that answer too 🤷🏼♂️
@@d1i2m3 tanck you, because my usb doesn't connect at all 😁😁
sir iam running with problem. i connect ftdi232 board then it doesnt show me port in device manager?
Lol I knew I bought this thing for a reason!
:-)
Hello, good video. I bought an ftdi adapter to save the fc (hglrc f4 flame) after usb error. Now I have again usb connection, but betaflight don't recognize. I used a free uart (6).
Should I change the connection on board to uart1 or can I enable msp on uart6 somehow?
Thank You for help.
I tried it, I use with port 1, 3, 6 but it doesn't work
ok but if you didn't use the usb port at first (which actually happens, your case never happens!), you can't connect to the ftdi anymore because it's impossible (I don't know. . but if the usb is not here), and change the msp port .. so useful this video! lol .. or you have to do that when you get the FC you sacrifice an uart port in anticipation of the possibility that you have an msp port to use maybe a day ?? all this for in case one day the fc no longer has a usb port you can connect it but it is not really a solution in the end, the solution is to be able to connect without usb, with an ftdi c adapter when the usb is better there, not before! that would be useful ..
My betaflight says serial port successfully opened with id 4 then closes 10 sec later
Would Betaflight connect to the board? Maybe it's a driver issue.