For sure, this is the best revolver in the world. I'm a French policeman and I used it (4 inches) at the World Police and Fire Games in Barcelona in 2003. I got the gold medal in Police Action Pistol with this gun. My French friend David got the same medal with the same gun at the 2001 WPGF in Indianapolis. At this date, US competitors used only Colt or S&W revolvers and laugh about us... but since this competitions, this revolver changed the rules ;-)
The MR73 was issued to French anti-gang / organised crime forces back in the 70's. The bad guys at the time were carrying plenty of 45 ACP equivalent and 9mmP was rejected as at the time AP's did not digest diverse loads other than fmj. The police needed stopping power and special forces but not over penetration which was inherent to the fmj 9mmP of the time. 357, high accuracy and robustness was selected over ease of use (obviously the guys using had serious levels of training). Current manufacturer is by Chapuis Arms (still French which make top of the line hunting guns) which bought out as all the tooling in the mid 1990's. Chapuis guns are better finished contrary to pupular belief. The GIGN guy actually took down 3 guys in that plane in 1994. Hope that's useful to a few revolver fans.
If anything the chapuis guns should be higher quality, they have some of the best gunsmith into he world, making some of the finest custom firearms ever
Also, from what I've read they were issued revolvers to ram home the point they were special ops guys, i.e. precision instruments and they wanted super accurate fire, as in many hostage situations they may only get that one shot, instead of dudes just rolling in and spraying everything with hi cap semi autos they know they can reload in a flash. At least that's what I've read in at least 2 sources concerning the legendary MR73 and the GIGN chads.
The fact is that the GIGN has a real "conservative" way to think. "Why change something which still works perfectly fine ?" kind of reasoning. However, GIGN operators carry two handguns. Their "service" MR73, and a "high" capacity pistol of their choice (generally a P228 or a Glock 19).
FYI: Manurhin MR 73 357 is one of the few firearms that withstood the russian weapon tests with flying colours (russian test is far far harsher than the worst real world neglect and abuse of weapon). To me that alone speaks volumes about this gun.
The Manurhin MR73 differs from other .357 Magnum revolvers that it was built to shoot A LOT of magnum rounds. Many .357 revolvers are guilty of not being able to withstand the pressure of continuous magnum shooting, since most gun makers assume that people will shoot more .38 Special rounds instead of .357 Magnum in their handguns. In the GIGN's case, they need the power of .357 Magnum for stopping terrorists quickly, so the MR73 fits their needs perfectly.
@@exothermal.sprocket Ruger revolvers are very tough to the point of withstanding very hot handloads, but they lack the smooth DA/SA trigger pull, high accuracy, and beautiful finish of Smith & Wesson revolvers. The MR73 has ALL of these traits, and that's why its considered the best .357 revolver by many folks.
@@diegos2594 Smith & Wessons are smoother than Rugers in terms of trigger pull (DA & SA). Both are accurate guns, though a smooth or rough trigger pull can affect user accuracy. Rugers are much more rugged than Smiths, being able to withstand higher cartridge pressures and rough field usage. The Manurhin MR73 combines the smoothness of S&W, and the ruggedness of Ruger. GIGN operatives are required to fire 150 rounds of full house .357 Magnum in their revolvers everyday. During the Air France Flight 8969 kidnapping, a lone GIGN operator was able to take out three terrorists armed with AKs & Uzis using his MR73. He shot two in the head, and critcally wounded the other.
If you like this revolver, I highly encourage you to take a look at the main scene of the movie "L'assaut", which can be found on UA-cam. The movie recreates the hijacking of an Air France flight that happened in 1994. All terrorists were taken down by the GIGN using this particular Manurhin.
I watched "Wages of Fear" just the other night. He did a lot of his own driving in "Grand Prix" as well and was said to be best actor driver after James Garner. Also, he fucced Marilyn Monroe.
I truly appreciate your time and effort in making these videos. I've certainly learned a tremendous amount of info re: rare firearms. ~thanks and take care
Nice to see an american fellow doing a review on a french revolver. I have on of these too and compete with in what we call TAR tournaments (combat shooting). It's doing great! Nice video you made there. I'd like to see you using it at the range tho. Oh and an advice: never dry shoot a revolver like you do. I'm pretty sure your hammer's pin is not loving it. If you want to dry shoot the weapon, load ammo casings into the chambers so that the pin can hit something on trigger release.
Classically good-looking shooter. I shoot target pistol in .22LR at 50m in the UK (our gun laws are well-known to be very restrictive) and the trigger action in SA on that Manhurin looks perfect for precision shooting. Love the review and you’re rightly proud of it
I really enjoy seeing the reviews of some of these high end guns that most of us will never own, kinda nice to geta peek at em. I may never own a Ferrarri, but that dont mean I dont enjoy looking at em and learning a thing or two bout em. Nice review, MIKE.
It's too late man. The craftsmen that built those things by hand are all dead now or almost dead. There just ain't enough talent to build those on a big scale again, since all the guys from the era of hand fitting most guns are all gone now. The era of amazingly tuned hand built revolvers is over sadly.
Pal, if you ever had a Colt Python Elite, you wouldn't want any other 357 in your life.. These European revolvers are not mass produced revolvers, they are manufactured like Swiss watch and in terms of value for money, Colt, Smith and Ruger beat them hands down.. 4000$ for a revolver ??? ( the price of a new Korth ) you godda be kidding me.. The US still makes the best revolvers in the World by a long shot .. The comments in the video represent nothing but personal opinions of whoever downloaded this and believe me his opinion is not shared by vast majority of revolver owners..
10 years on , LifeSizePotato - videos still hold up , correct information , good shooting , high quality video standards. i dont know what hes doing today (june 2024) but i'm stil rewatching his videos.
I owned 2 Mr73 and they were the best shooting revolvers I ever owned , I also owned a Korth 357 sport and that was also for single action shooting perfect but for double action shooting I hated the thing , their the unique double action system in the Mr73 revolvers worked out perfectly they have a system that even when you pull the trigger back the tension says the same and for double action shooting this is awasome.
Thanks for doing this review, it's rare to see Americans or Canadians on the internet paying attention to the guns produced in by our nation. (Probably because we made so few of them) This revolver has a great history since it was the first high-quality revolver produced in here since the black powder era. It used to be standard issue to the police, before the Beretta 92 FS produced under licence as the MAS G1, and latter the SIG Pro. I know old police officers who used to trust their lives on this thing and never got disappointed with it. Special forces and anti terror units such as the GIGN, the RAID, the 1st RIMA, the Navy Commandos, or the Aerial Commandos still use it and it has seen action in the Paris shooting, both in the kosher shop attacked by the RAID, and the warehouse attacked by the GIGN. You'd expect such units to have moved on to more modern systems, but as I have been told by people from the Gendarmerie (not the GIGN, since their identities are classified) it is rugged, reliable and accurate enough to be still used un close quarter combat to this day, and it backs a hell of a punch. (Some speculate that the bullet prof vests the Kuachi brothers wore were ripped to pieces by this gun).
As an American, I love my Colts and S&W's but will buy an MR73 the first chance I get because of the sheer accuracy and quality of the gun. Check out "Forbidden Weapons" on youtube..Ian, aka Gun Jesus, loves French weapons and knows a lot about them and collects them. You may enjoy it very much.
@@MW-bi1pi Love Ian channel too! But I am a bit jealous about the number of weapons he tests and how easy it is for you in US to do it (PAK try was a very good one ^^).
Yes the Manurhin is a excellent revolver, this model in the vid is a sport version, the police/special forces as a rounded sign to not lock in the holster. Important detail: the Manurhin is high accurate and as a high precision assembly: this need high quality ammo, not to heawy loaded to avoid primer rear deformation who can lock the barel rotation
My original colt python i purchased decades ago came with almost that black chrome bluing...yes I did finally get enough savings to finally purchase this beauty..its outstanding thru and thru..thx for posting
God,wish I could afford one, surplus would be fine. Read where one had fired one million rounds and was still performing fine. Saw a you tube video where they were being sold for 600.00 bucks. Wish in one hand ..
That is some deep bluing. Looks great. I would never own one unless it was one of those beat up ones. I do not like keeping weapons around here that would break my heart if I scratch it.
9:38 the hammer looks just like a little man. LOL There's a lot less haters on this vid than on the Korth video. Every other comment on the Korth was some nasty vitriolic comments. Congrats again on another fine acquisition. Also, when are you going to do a review on the rabbits?
I saw that movie and remember thinking "they musta ran short of semi autos when making this film", love that they made an insanely tough .357 as a combat pistol!
Congratulation from France for being the pride owner of that jewel !! You can't go wrong with a MR 73 :) They are now produced by the company Chapuis armes
@@diegos2594 Hi Diego ! The very first Manurhin made by Chapuis were not exactly as as perfect as the original ones. Since Chapuis usually produces very high quality hunting guns they needed a bit of time to adapt to handguns making. Since then, the Chapuis made Manurhin are just as good as the original ones. They have the same features, durability and quality standards ... But also the same problem (this are very expensive guns - every penny worth but still expensive). The best thing to do is to order one directly from France avoiding the importer and dealer margins.
@@tonyffessm233 Thanks for the info! Can I ask when the 2020-2021 model's production started? I didn't find anything on the web. Also, no info about tests and feedbacks.
@@diegos2594 Chapuis took over the Manurhin production in 1998. They never stopped their production since then. Some people say that the Chapuis made revolver are even better finished than the old Manurhin made.
Very informative video. The endurance test was amazing & you explained very well what makes it a real premium revolver. I'm curious to know how a Ruger GP100 would compare in terms of endurance ( I always thought they were stronger than Smiths or Colts).
for those with netflix, there's a french film (The Assault in English) about the 1994 Air France hostage rescue. GIGN consulted on it, and you get some exposure to the MR73.
I Bought a chapuis made MR73 in Nov 2017. By feb 2019 I had put 3,500 rounds of Geco 357 158 gr SJHP and 500 "soft" professionally reloaded 38spl LRN . The cylinder release catch broke. A gunsmith removed the catch which had split in two and pointed out the forcing cone was cracked and flame damaged. The frame above the forcing cone also had slight flame damage. There were "ghost" marks from the cartridges and ejector star on the recoil plate. The gunsmith attributed this damage to the gun not "liking" magnum loads.I returned the gun to the vendor who informed me I'd clearly been dangerously overloading my re-loads. Therefore my warranty is void. In an act of good will he informed the Police I was unsafe with fire arms and should have my licence revoked. I took the gun to a second gunsmith for another assessment, his conclusion was, the barrel was made of poor quality steel and the gun is fit for use with magnum loads. I have read only favourable reviews of the Manurhin made MR 73s. My theory is Chapuis have dropped the quality control ball. I deeply regret this purchase. Mainly due to abysmal customer service.
These are some great videos here. Keep making these, they are extremely entertaining and educational. On a separate note stop the video at 9:39....look at the hammer and tell me you dont see a face hahaha, looks like a character out of a Gumby movie.
Je rappelle que la France faisait des armes d'excellence et que notre politique nous a condamné a abandonner nos manufacture. J'ai honte de nos dirigeants !!!! Vive les citoyens armes et libre!!
I understand French SWAT teams still use this revolver. My only question is why? There are so many excellent semi-auto pistols made in Europe such as Glock, Sig-Sauer etc. etc. Do they use this gun for the reliability, stopping power? Also what type of ammo do the French use as a duty load? Please explain if you know!
I would like to correct something: It wasn't designed for the GIGN, but it was designed during the year the GIGN was created, and the team (that was composed of 19 men at its beginning) chose it because it was far more reliable than their old duty MAC50 and the .357 Mag cartridge was the best compromise to shoot down the enemy without killing him: in the GIGN, a mission where somebody die (team member or enemy) is a failed mission! But the 6 rounds gun has never been a problem. The GIGN member has an incredible training (one drill asks to a gendarme to shoot on one of his mates with a live .357 round at 10 meters, the "target" wears a kevlar vest with a balltrap plate on it). So, during the late-70's, a GIGN member managed to shoot (at 6 meters) a hostage keeper in the hand that held the gun and, when he tried to catch his weapon with his other hand, the gendarme shot him a second time in the other hand! The best of this story is that during his lawsuit, the hostage keeper publicly thanked the shooter and the team leader, who were in the court, to kept him alive!
"Shoot down the enemy without killing him" What exactly does this mean? Are you employing that this gun was not meant to be used as a lethal weapon? That doesn't make much sense to me.
D5quared91 GIGN operators try to not kill who they shoot as much as they can. They believe weapons made to be unlethal are not reliable/efficient enough and think that a well placed powerful round (in the shoulder, the arm, the leg or something) is the best way to incapacitate a guy without actually killing him. When you see documentaries on the GIGN it's kind of funny because they train on human size targets but seem to never go for the center mass or the head. They typically aim for the armed hand.
With Ruger single actions, a common thing to do is a "poor man's trigger job". This entails removing the grips and removing one side of the 6lb trigger return spring. It cuts the pull almost in half. I mention this only because you don't deal with Ruger much and it seems unlikely you'd find much interesting in most Rugers. It also explains how their adjustable trigger may work; it may simply compress or decompress the trigger return spring to increase/decrease trigger pull.
I'd like to see a video on the MR-96, to be honest. There's absolutely nothing on youtube about the MR-96; a few vids about the MR-93. Back in the days, when the 96 was new, it got pretty good ratings in gun-magazines (here in Europe, at least).
Under the grips along the front grip strap there is an allen head screw for the trigger pull and a regular screw for the hammer. Real pain setting them.
Yes, they are still produced, but not by "Manurhin". Chapuis (another french enterprise) took the revolver manufacture as Manurhin wanted to develop its industries in another specialization (than fire arms). But Manurhin is still producing ammunitions.
And if you'd like to know , Chapuis makes very good weapons too ; they're more into hunting rifles but whatever firearm they craft is a fine piece of weaponry , fore sure :)
Are you concerned or have you had any issues with moisture being trapped under the tape on the cylinder? Also, could you do a side-by-side with this and the Korth or possibly the Python showing the locks (with side plates off)?
I change it pretty frequently. It only lasts about 2 range trips, and then I take it off, wipe it down with some oil and clean it, and put new tape on.
It's an age old dilemma: AP rounds defeat the armour, but have less stopping power as their needle-like form cause little tissue damage, on the other hand auto ammunition that is able to cause shock is usually not AP. You can try to reinvent ammo, like russians did with 9x39 SP6 and 9x21 SP10/11, or you can have a high power revolver rounds that solve both problems at the same time. And with that kind of accuracy it only makes sense to use it as a pocket sniper pistol.
Silurus 1988 Modern MR73's are just as good as older ones. But modern MR73 have a .357 barel where the older ones had a .355 barel to be able to shoot surplus 9mm cartridges for training.
Well ... you can always install a 9 mm cylinder in a modern Manurhin but your bullet will tumbel and the accuracy would be rather poor. But I've seen .357 9mm bullet in some reloading stores in france so ... maybe you could install a 9 mm cylinder and shoot 9 mm cartridges reloaded with .357 bullets but that's a lote of work just for shooting a pistol cartridge in a revolver ... i would just shoot a nice .38 sp. if I were you ^^
I can't find Manurhin MR 73 anywhere for sale. I noticed the firing pin is on the hammer. I can see the firing pin breaking at some point. How or Is there any support on this revolver here in the USA ?
Question, I am interested in the 4 inch police model of this gun. Beretta is importing a very limited quantity of some of these pistols in the United States this year, they are very rare and very limited at this point, I need to know if the police model has adjustable sights! The 4 inch model! From the websites I’ve seen so far it does not list very much if anything about the sites
Hi, Are there tell tale signs that identify a real Mulhouse made MR73 vs. from Chapuis? For instance on the right side of the MR73 there are two screws, one near the hammer and one down at the bottom below the cylinder and to the front of the frame, but on some MR73's I don't see the top screw near hammer like in yours. How about box color, ie., green vs. light blue? Any info you could provide would be much appreciated. Im considering one that doesn't have the screw near the hammer and it comes in a light blue box (where I usually see a green box). Thanks!
If it has the top screw it's one of the first produced. So made by Manurhin. The wood handle shown here was only made by Manurhin (but some have bought it for their new MR73). The new ones are exactly like the ones made by Manurhin, same quality, same characteristics.
A little late to help you, probably, but maybe someone else will see it: An MR73 will have a serial number beginning with the prefix "HA" if and only if it was produced by Chapuis. All Mulhouse-produced MR73s have one of 16 other single- or double-letter prefixes, depending upon barrel length, caliber, and sight configuration.
Hi there, I was wondering if you could help me out with a question I have about MR73. I have an older production, never fired one and the cylinder when unloaded can move back and forth about half a millimeter or maybe less. Is this normal?
+LifeSizePotato Hmmmm .... so if you swing the cylinder out, it can't move back and forth slightly at all? If so that concerns me about my MR73. Maybe I should show it to a smith.
+KingKiavash Oh, I didn't think you meant with the cylinder out. It does move back and forth just a hair. With the cylinder in the frame, it doesn't. I'd imagine your gun is fine, they weren't mass produced without quality checks and it sounds like it was barely used if at all.
+LifeSizePotato Phew ... thanks a lot for your response! Finding another Manurhin owner up here in Canada is next to impossible. The MR73 I have has never been shot as far as I can tell and is partly the reason why I can't bring myself to shoot it. I'm hoping to find one someday that has been shot but it seems like that's nothing but a pipe dream. Also I noticed you were quite fond of the Delta pistols, if so, then check out marstar .ca. They have a few of them up for grabs :)
+KingKiavash I actually got my Top Gun from Marstar. The gun is amazing but I can't encourage people to give them money after my experience with their CEO.
Dear Sir, in your opinion S&W revolvers pre model 27 are good. What about the model 27 itself? Why do you prefer older S&W pre model 27? I have just bought a 27-2 5" barrel. What do you think about it?
The Model 27-2 is one of the best revolver ever made. I owned a few Manurhin MR73, believe me, I highly prefer the S&W. And I'm French ! One good thing at least : the bluing of the MR73 is gorgeous.
It's cool. I love to hear the durability factor. I however wont shoot that much ever and prefer my occasional shooter puthon for looks and trigger. I can only go by the reviews to judge trigger as I've never seen one let alone shot one
Do you have a Dan Wesson by any chance? I know they are a more common gun than what I have seen you review, but I'd like to know your take on them. I have a Model 15-2 that needs some serious work done to get it fixed and money is too tight to get it up and running again yet.
The amazing is that MR-73 was born and used like service gun and not like a millionaires caprice like Korth's..... I remember the double single and double action separated adjustment. Adjusted like high-end luxury watch... Remember that Manurhin produces on past times the best Walthers PP/PPK pistols ver made.
Good video. If I can advice on one thing: never dry shoot a revolver. Use dummy rounds or fired casings, anything you want provided the hammer hits something on trigger pull.
Ruger knows their product better than any of us. The hammer is hitting a transfer bar and, the firing pin is spring loaded, so I don't think there would be an issue. As for not being fine, it's not cheap, or low class either. It's a solid revolver and, quite reliable. It's up to the job it's made for.
Hello, just wondering if you can do a quick review on the recently imported century mr73 revolvers, you do a GREAT job on these reviews and I really enjoy them. Thanks
Do a video of you reading the part of the gun dealer from the movie Taxi Driver. You have a similar manner of speaking, so it would be an interesting exercise.
I started collecting 357's and this one I really would like to find, maybe at an auction. How much are they today... used one, or with box and documents.
The most desirable versions are the original Mulhouse-produced guns, manufactured before Chapuis Armes took over production. The actual Manurhin company no longer produces the MR73, but Chapuis has produced the MR73 since 1998, using the Manurhin name. You can buy one directly from the U.S. company that imports them if you're willing to wait several months (maybe close to a year). These run around $3,000 to $3,200, I believe. They also pop up on Gunbroker from time to time. A 99+% Mulhouse specimen with complete box and papers will generally go for more than $4,000 these days (and more still if it's a 5.25" gun with the optional 9mm cylinder). You can generally find Mulhouse MR73s in very good condition, often without box and papers, for $3,000 to $3,500. Thanks to one volume gray-market importer (TheAttic), they are much more common on Gunbroker than they used to be. There's actually one for sale right now on GB that looks to be possibly a pretty nice deal. It's a 5.25" Mulhouse MR73 with 9mm cylinder in apparent very good condition (need more photos), but with no box or papers, for under $3,000. The easiest way to tell if you're looking at a Mulhouse or Chapuis MR73 is by the serial number prefix. "HA" designates a Chapuis MR73 of any barrel length. The Mulhouse guns used a specific letter prefix for each barrel length and sight configuration.
@@jasonrogers6454 You seem to know all about that gun :) interesting when someone goes into details like you. I only collect 357's so the 9mm chamber is out of th question to me. I'm looking for one in better condition, close to brand new. If it has box + papers is not that important. I have some very rare 357s, first batch Python, a Boa and the titanium Anaconda are the more expensive one's I have and this one is missing in that collection (at least to me). Do you know any other very rare modern day manufacture 357s? Only serial production, I'm not interested in "jubilation" or engraved guns or anything like that, only regular production
@@vabbe71 I should have been more clear on the 9mm cylinders -- the guns are all chambered in .357 Mag., but some come with an additional 9mm cylinder. The cylinder is very easily removed on the MR73, so some folks like to have the option of shooting both calibers. Nice .357 collection you have. I'd definitely agree that none is complete without an MR73. It's simply the best double-action service revolver of all time, in my opinion. (Be certain that you're not buying an MR88. This is a completely different gun that Manurhin built in a collaboration with Ruger, and it was designed to be much cheaper. It's not remotely in the same class as the MR73.) Have you looked at Korths? While the Manurhin is the finest combat revolver ever, Korths made in Ratzeburg in the 1970s and 1980s are the finest sporting revolvers ever. Both the MR73 and Korth revolvers are exceptionally durable and accurate, but the Korths are unmatched in refinement. Korths have clearances that are probably too tight to be ideal for a service weapon, which needs to be able to function when filthy, but the precision with which they were built is like nothing else. The revived Korth company in Lollar currently makes some outstanding revolvers, which are imported by Nighthawk. They vary from the originals in aesthetics (DLC/PVD finish versus bluing; some of the more expensive models have some hideous rails) and a bit in design as well, but they are also highly refined and accurate guns.
how much did you pay for it? was it new? i ll get mine as soon as i ve got my permit. it retails for about 1400euros in france. nice guns you have! like the python too.
Enjoy your videos....tempting me to start a hunt for the Korth and or the '73. One question, how do you avoid possible chemical damage from the electrical tape, you are using?
I noticed that there are some recent century imports of this gun, I am not sure if they are from austria like the other ones but do you/anyone you know have experience with them? They seem pretty beat up.
I have one, and had another. Some are in better shape than others. The ones in decent shape are actually pretty good, with nice bluing and they aren't too loose. They aren't as tight as a new gun, of course, but they're 95% of it. Another I had, though, was pretty beat up and a little too sloppy for my taste. It still shot fine and was accurate, but most of the finish was gone and the grips were in bad shape. If I were to buy another Century import, I'd be sure it was one of the better condition guns. Those are good buys.
Thank you very much, do you have any sort of information on the MR88? I haven't been able to find out much information on it other than them being more cosmetically like rugers.
They are essentially Rugers (I think Ruger actually worked with them on the gun) with an extra lock point in front of the cylinder. I've never had much interest in the 88s because they're a bit too Ruger-y looking (never been a fan of those) but I imagine they will perform almost identically to a GP100. They are definitely not related to the 73 in any way and won't be as accurate nor as strong, and I presume the trigger won't be as great, either. Still, certainly an uncommon gun and probably worth picking up if the price is good for the uniqueness alone.
MNHJTY I'm a french sport shooter and I shoot the mr73. MR88 are not "like" Rugers they are rugers. It's basically a gp100 made in france ^^. The history behind it is that MR73 were too expensives and took too long to make for a large scale deployment to all police and gendarmerie forces so the MR 88 was intended as a poorman MR73. They are better than modern smiths (in my opinion) but not as good and robust as the MR73. A used MR88 is not worth much compared to modern smiths because they do experience stretching.
Nice collection, did you have to import this on a form 6 or was it already stateside ? I am looking into importing one of these, and a Korth, but the paperwork is a pain.
It hurts nothing. It can handle 170,000 rounds worth of full house .357 loads. Every military in the world trains with dry firing included. The only firearms that may suffer from dry firing are rimfires due to the design of the firing pin hitting the breech face.
+David Cortez Ah. I see someone else just came from Aim Surplus. :) Just checked, and I'm mistaken. It's Classic Firearms who has them for sale. My bad.
Yes Classic, and they always seem to have good surplus....however, $250 more and get a brand new 686 S&W? Or is this Apples and Oranges? Ever since I saw this video, last couple weeks, I've been checking Classic site- and what do you know!:)
+David Cortez The MR73 is a totally different level. As LSP mentions in the video, these revolvers have been tested for up to 170,000 rounds of .357 without breaking the pistol. Show me a S&W that's been tested for 100,000+ .357s and I'll get that instead. xD
New, in France, the MR73 costs today (july 2020) 2 500 euros at most (US $ 2940). Used Colt Pythons cost in France the same price. Look for the mistake...
Looking at this video makes my heart hurt because I own a MR 73 but heavily modifiyed for 1500 Shooting. Wish I could revert the modifications someday.
For sure, this is the best revolver in the world. I'm a French policeman and I used it (4 inches) at the World Police and Fire Games in Barcelona in 2003. I got the gold medal in Police Action Pistol with this gun. My French friend David got the same medal with the same gun at the 2001 WPGF in Indianapolis. At this date, US competitors used only Colt or S&W revolvers and laugh about us... but since this competitions, this revolver changed the rules ;-)
The MR73 was issued to French anti-gang / organised crime forces back in the 70's. The bad guys at the time were carrying plenty of 45 ACP equivalent and 9mmP was rejected as at the time AP's did not digest diverse loads other than fmj. The police needed stopping power and special forces but not over penetration which was inherent to the fmj 9mmP of the time. 357, high accuracy and robustness was selected over ease of use (obviously the guys using had serious levels of training). Current manufacturer is by Chapuis Arms (still French which make top of the line hunting guns) which bought out as all the tooling in the mid 1990's. Chapuis guns are better finished contrary to pupular belief. The GIGN guy actually took down 3 guys in that plane in 1994. Hope that's useful to a few revolver fans.
If anything the chapuis guns should be higher quality, they have some of the best gunsmith into he world, making some of the finest custom firearms ever
Also, from what I've read they were issued revolvers to ram home the point they were special ops guys, i.e. precision instruments and they wanted super accurate fire, as in many hostage situations they may only get that one shot, instead of dudes just rolling in and spraying everything with hi cap semi autos they know they can reload in a flash. At least that's what I've read in at least 2 sources concerning the legendary MR73 and the GIGN chads.
What. A. Beauty. This classic design. The ARCHETYPE of a good revolver.
The fact is that the GIGN has a real "conservative" way to think. "Why change something which still works perfectly fine ?" kind of reasoning.
However, GIGN operators carry two handguns. Their "service" MR73, and a "high" capacity pistol of their choice (generally a P228 or a Glock 19).
FYI:
Manurhin MR 73 357 is one of the few firearms that withstood the russian weapon tests with flying colours (russian test is far far harsher than the worst real world neglect and abuse of weapon).
To me that alone speaks volumes about this gun.
@Uksi o What is the Russian firearms test named? Thanks.
@@diegos2594 Good luck getting an answer, Uksi posted that comment 8 years ago… heck for all we know, he could be on the front lines of the Ukraine.
@@RevolverOcelot79 haha shame I would love a source on that
Genuinely interested about it!
@@diegos2594 they shoot cans of caviar while being drunk on vodka.
That single action. Wow. I had to rewatch a couple times, can't get enough of it.
MR73, I was so impressed with your video that I bought one! And I love it!
Good choice ! I am shooting with one in 5 inches 1/4 (GIGN model) for more than 20 years with no issue. Fantastic gun !!!
@@TheRobertSt good for you !
The Manurhin MR73 differs from other .357 Magnum revolvers that it was built to shoot A LOT of magnum rounds. Many .357 revolvers are guilty of not being able to withstand the pressure of continuous magnum shooting, since most gun makers assume that people will shoot more .38 Special rounds instead of .357 Magnum in their handguns.
In the GIGN's case, they need the power of .357 Magnum for stopping terrorists quickly, so the MR73 fits their needs perfectly.
Arguably a Ruger GP100 can withstand a lot of magnums, but it's not on the same planet in terms of finish, fit, and accuracy.
@@exothermal.sprocket Ruger revolvers are very tough to the point of withstanding very hot handloads, but they lack the smooth DA/SA trigger pull, high accuracy, and beautiful finish of Smith & Wesson revolvers. The MR73 has ALL of these traits, and that's why its considered the best .357 revolver by many folks.
@@ReonMagnum What's the Ruger accuracy compared to Manurhin's? Is there an official chart to check firearms accuracy and toughness? Thanks.
@@diegos2594 Smith & Wessons are smoother than Rugers in terms of trigger pull (DA & SA). Both are accurate guns, though a smooth or rough trigger pull can affect user accuracy. Rugers are much more rugged than Smiths, being able to withstand higher cartridge pressures and rough field usage.
The Manurhin MR73 combines the smoothness of S&W, and the ruggedness of Ruger. GIGN operatives are required to fire 150 rounds of full house .357 Magnum in their revolvers everyday.
During the Air France Flight 8969 kidnapping, a lone GIGN operator was able to take out three terrorists armed with AKs & Uzis using his MR73. He shot two in the head, and critcally wounded the other.
@@ReonMagnum Thanks for the info! Can I ask if anything was heard of the current Manurhin?
If you like this revolver, I highly encourage you to take a look at the main scene of the movie "L'assaut", which can be found on UA-cam. The movie recreates the hijacking of an Air France flight that happened in 1994. All terrorists were taken down by the GIGN using this particular Manurhin.
Yes, for you US mates, you can also watch "tir de confiance GIGN" and you will undestand what is this gun in GIGN hands
Or "Police Python 357" with Yves Montand : P
@@Gieszkanne RIP,, THE GREAT YVES MONTAND!!
I watched "Wages of Fear" just the other night. He did a lot of his own driving in "Grand Prix" as well and was said to be best actor driver after James Garner. Also, he fucced Marilyn Monroe.
Nothing pretentious about pronouncing something properly.
Exactly. And as a Frenchie (who can't pronounce anything in English properly), I appreciate that. :)
He was close enough, that was kinda refreshing.
@@schplafff I do agree, I am french too, and the first time he said it, it was near perfect.
Why everyone looked at me confused after I ordered a croissant with perfect pronunciation? I’m in China btw.
I truly appreciate your time and effort in making these videos. I've certainly learned a tremendous amount of info re: rare firearms.
~thanks and take care
Nice to see an american fellow doing a review on a french revolver.
I have on of these too and compete with in what we call TAR tournaments (combat shooting). It's doing great!
Nice video you made there. I'd like to see you using it at the range tho.
Oh and an advice: never dry shoot a revolver like you do. I'm pretty sure your hammer's pin is not loving it. If you want to dry shoot the weapon, load ammo casings into the chambers so that the pin can hit something on trigger release.
Classically good-looking shooter. I shoot target pistol in .22LR at 50m in the UK (our gun laws are well-known to be very restrictive) and the trigger action in SA on that Manhurin looks perfect for precision shooting. Love the review and you’re rightly proud of it
I really enjoy seeing the reviews of some of these high end guns that most of us will never own, kinda nice to geta peek at em. I may never own a Ferrarri, but that dont mean I dont enjoy looking at em and learning a thing or two bout em. Nice review, MIKE.
Who'd have thought those Europeans would have better revolvers than us. God damn you Colt, bring back out pride and joy, the Python.
A thumb-up for your honesty.
It's too late man. The craftsmen that built those things by hand are all dead now or almost dead. There just ain't enough talent to build those on a big scale again, since all the guys from the era of hand fitting most guns are all gone now. The era of amazingly tuned hand built revolvers is over sadly.
Also the company MANURHIN doesn't exist any more...
Pal, if you ever had a Colt Python Elite, you wouldn't want any other 357 in your life.. These European revolvers are not mass produced revolvers, they are manufactured like Swiss watch and in terms of value for money, Colt, Smith and Ruger beat them hands down.. 4000$ for a revolver ??? ( the price of a new Korth ) you godda be kidding me.. The US still makes the best revolvers in the World by a long shot .. The comments in the video represent nothing but personal opinions of whoever downloaded this and believe me his opinion is not shared by vast majority of revolver owners..
Of course Manurhin still exist.
I don't know why you left but it would be awesome if you came back to UA-cam.
10 years on , LifeSizePotato - videos still hold up , correct information , good shooting , high quality video standards. i dont know what hes doing today (june 2024) but i'm stil rewatching his videos.
I owned 2 Mr73 and they were the best shooting revolvers I ever owned , I also owned a Korth 357 sport and that was also for single action shooting perfect but for double action shooting I hated the thing , their the unique double action system in the Mr73 revolvers worked out perfectly they have a system that even when you pull the trigger back the tension says the same and for double action shooting this is awasome.
What an awesome revolver and WORTH EVERY PENNY.
Thanks for doing this review, it's rare to see Americans or Canadians on the internet paying attention to the guns produced in by our nation. (Probably because we made so few of them)
This revolver has a great history since it was the first high-quality revolver produced in here since the black powder era. It used to be standard issue to the police, before the Beretta 92 FS produced under licence as the MAS G1, and latter the SIG Pro. I know old police officers who used to trust their lives on this thing and never got disappointed with it.
Special forces and anti terror units such as the GIGN, the RAID, the 1st RIMA, the Navy Commandos, or the Aerial Commandos still use it and it has seen action in the Paris shooting, both in the kosher shop attacked by the RAID, and the warehouse attacked by the GIGN.
You'd expect such units to have moved on to more modern systems, but as I have been told by people from the Gendarmerie (not the GIGN, since their identities are classified) it is rugged, reliable and accurate enough to be still used un close quarter combat to this day, and it backs a hell of a punch. (Some speculate that the bullet prof vests the Kuachi brothers wore were ripped to pieces by this gun).
As an American, I love my Colts and S&W's but will buy an MR73 the first chance I get because of the sheer accuracy and quality of the gun. Check out "Forbidden Weapons" on youtube..Ian, aka Gun Jesus, loves French weapons and knows a lot about them and collects them. You may enjoy it very much.
@@MW-bi1pi Love Ian channel too! But I am a bit jealous about the number of weapons he tests and how easy it is for you in US to do it (PAK try was a very good one ^^).
Beretta USA is now importing these new.... MSRP $3300. Not a cheap gun, but one of the best revolvers that you can buy in the world.
Yes the Manurhin is a excellent revolver, this model in the vid is a sport version, the police/special forces as a rounded sign to not lock in the holster. Important detail: the Manurhin is high accurate and as a high precision assembly: this need high quality ammo, not to heawy loaded to avoid primer rear deformation who can lock the barel rotation
Really liking the channel. Good to see videos that show the more unique firearms.
Very interesting.
My original colt python i purchased decades ago came with almost that black chrome bluing...yes I did finally get enough savings to finally purchase this beauty..its outstanding thru and thru..thx for posting
Its the BEST revolver of all times...tested with 300 000 full power load shots....and zero failure or metall loosing !!!!!
P S . ex aequo with 2 others...
.KORTH and RUGER gp100
Traditional GIGN gun , you can see it in action here L'Assaut (2011) - French GIGN stormed Air France 8969 in Marignane Airport 1994
King of revolvers.
God,wish I could afford one, surplus would be fine. Read where one had fired one million rounds and was still performing fine. Saw a you tube video where they were being sold for 600.00 bucks. Wish in one hand ..
Nice pieces. That Manurhin makes me salivate. Where did you get yours? Darn hard to find a good one in US.
That is some deep bluing. Looks great. I would never own one unless it was one of those beat up ones. I do not like keeping weapons around here that would break my heart if I scratch it.
You really do great reviews!Thanks!
This review is a love letter.
I loved the Korth video and shared it with friends so I was really excited when I saw this one right after!
Nice presentation, glad you chose a French weapon, it changes from S & W, COLT and RUGER.
9:38 the hammer looks just like a little man. LOL There's a lot less haters on this vid than on the Korth video. Every other comment on the Korth was some nasty vitriolic comments. Congrats again on another fine acquisition. Also, when are you going to do a review on the rabbits?
I saw that movie and remember thinking "they musta ran short of semi autos when making this film", love that they made an insanely tough .357 as a combat pistol!
It's a beautiful weapon, and pronouncing the name in French isn't you being "stuck up" it's the only correct way because it's French!
Correct, Señor Douche.
He pronounced it perfectly in French, that's so rare for an american and he is not proud of it..sad
Right on. That is very interesting info. Thanks for the reply!
I own a Manurhin .357. Just recently I picked up a Korth .22 lr. Will be interesting to see how that shoots!
Congratulation from France for being the pride owner of that jewel !! You can't go wrong with a MR 73 :)
They are now produced by the company Chapuis armes
@@tonyffessm233 Do you know if the current Manurhin is the same exact quality and features as the previous models? Thanks.
@@diegos2594 Hi Diego ! The very first Manurhin made by Chapuis were not exactly as as perfect as the original ones. Since Chapuis usually produces very high quality hunting guns they needed a bit of time to adapt to handguns making.
Since then, the Chapuis made Manurhin are just as good as the original ones. They have the same features, durability and quality standards ... But also the same problem (this are very expensive guns - every penny worth but still expensive).
The best thing to do is to order one directly from France avoiding the importer and dealer margins.
@@tonyffessm233 Thanks for the info! Can I ask when the 2020-2021 model's production started? I didn't find anything on the web. Also, no info about tests and feedbacks.
@@diegos2594 Chapuis took over the Manurhin production in 1998. They never stopped their production since then. Some people say that the Chapuis made revolver are even better finished than the old Manurhin made.
Very informative video. The endurance test was amazing & you explained very well what makes it a real premium revolver. I'm curious to know how a Ruger GP100 would compare in terms of endurance ( I always thought they were stronger than Smiths or Colts).
for those with netflix, there's a french film (The Assault in English) about the 1994 Air France hostage rescue. GIGN consulted on it, and you get some exposure to the MR73.
Had one that was surplus. Had little finish left from use and still shot excellent. It is one gun I should have kept, even though it looked like hell.
great video, but what happened to making a mr93 video???
he made one a while ago, but there isnt any talking in it, just shooting
The first wave of the guys who stormed the flight AF8969 was equipped with this unique weapon...
Great review. I really would love to find a non-Beretta original one.
The bluing is beautifully awesome.
I think the bluing is "Baader Blau".
I Bought a chapuis made MR73 in Nov 2017. By feb 2019 I had put 3,500 rounds of Geco 357 158 gr SJHP and 500 "soft" professionally reloaded 38spl LRN .
The cylinder release catch broke. A gunsmith removed the catch which had split in two and pointed out the forcing cone was cracked and flame damaged. The frame above the forcing cone also had slight flame damage. There were "ghost" marks from the cartridges and ejector star on the recoil plate. The gunsmith attributed this damage to the gun not "liking" magnum loads.I returned the gun to the vendor who informed me I'd clearly been dangerously overloading my re-loads. Therefore my warranty is void. In an act of good will he informed the Police I was unsafe with fire arms and should have my licence revoked. I took the gun to a second gunsmith for another assessment, his conclusion was, the barrel was made of poor quality steel and the gun is fit for use with magnum loads. I have read only favourable reviews of the Manurhin made MR 73s. My theory is Chapuis have dropped the quality control ball. I deeply regret this purchase. Mainly due to abysmal customer service.
the best revolver ....I had a MR 73, parkerised and 3" barrel, on duty 10 years ago, now I'm wearing a plastic gun (SIG PRO)... :(
Are the Manurhins used for competition?
These are some great videos here. Keep making these, they are extremely entertaining and educational. On a separate note stop the video at 9:39....look at the hammer and tell me you dont see a face hahaha, looks like a character out of a Gumby movie.
Cool gun! Absolutely gorgeous finish!
Je rappelle que la France faisait des armes d'excellence et que notre politique nous a condamné a abandonner nos manufacture. J'ai honte de nos dirigeants !!!! Vive les citoyens armes et libre!!
To me it looks like a beautiful mixture of S&W with a bit of Colt design. Like a copy that is better than the original.
I understand French SWAT teams still use this revolver. My only question is why? There are so many excellent semi-auto pistols made in Europe such as Glock, Sig-Sauer etc. etc. Do they use this gun for the reliability, stopping power? Also what type of ammo do the French use as a duty load? Please explain if you know!
I would like to correct something:
It wasn't designed for the GIGN, but it was designed during the year the GIGN was created, and the team (that was composed of 19 men at its beginning) chose it because it was far more reliable than their old duty MAC50 and the .357 Mag cartridge was the best compromise to shoot down the enemy without killing him: in the GIGN, a mission where somebody die (team member or enemy) is a failed mission!
But the 6 rounds gun has never been a problem. The GIGN member has an incredible training (one drill asks to a gendarme to shoot on one of his mates with a live .357 round at 10 meters, the "target" wears a kevlar vest with a balltrap plate on it). So, during the late-70's, a GIGN member managed to shoot (at 6 meters) a hostage keeper in the hand that held the gun and, when he tried to catch his weapon with his other hand, the gendarme shot him a second time in the other hand!
The best of this story is that during his lawsuit, the hostage keeper publicly thanked the shooter and the team leader, who were in the court, to kept him alive!
"Shoot down the enemy without killing him"
What exactly does this mean? Are you employing that this gun was not meant to be used as a lethal weapon? That doesn't make much sense to me.
D5quared91 GIGN operators try to not kill who they shoot as much as they can. They believe weapons made to be unlethal are not reliable/efficient enough and think that a well placed powerful round (in the shoulder, the arm, the leg or something) is the best way to incapacitate a guy without actually killing him.
When you see documentaries on the GIGN it's kind of funny because they train on human size targets but seem to never go for the center mass or the head. They typically aim for the armed hand.
No it was the revolver of the GIGN
today they have pistols Sig Pro 2022
.357 rounds with their stopping power can't be fired by semi-auto. That's why GIGN still uses them.
With Ruger single actions, a common thing to do is a "poor man's trigger job". This entails removing the grips and removing one side of the 6lb trigger return spring. It cuts the pull almost in half. I mention this only because you don't deal with Ruger much and it seems unlikely you'd find much interesting in most Rugers.
It also explains how their adjustable trigger may work; it may simply compress or decompress the trigger return spring to increase/decrease trigger pull.
I'd like to see a video on the MR-96, to be honest. There's absolutely nothing on youtube about the MR-96; a few vids about the MR-93. Back in the days, when the 96 was new, it got pretty good ratings in gun-magazines (here in Europe, at least).
How does it compare to Dan Wesson Model 15 or how does the Dan Wesson compare?
Under the grips along the front grip strap there is an allen head screw for the trigger pull and a regular screw for the hammer. Real pain setting them.
Once I'll explain how to succeed, it's very easy ;-)
Are these still in production?
Yes, they are still produced, but not by "Manurhin". Chapuis (another french enterprise) took the revolver manufacture as Manurhin wanted to develop its industries in another specialization (than fire arms). But Manurhin is still producing ammunitions.
Oh ok, I see. Thank you for responding! You have an awesome revolver collection!
And if you'd like to know , Chapuis makes very good weapons too ; they're more into hunting rifles but whatever firearm they craft is a fine piece of weaponry , fore sure :)
Are you concerned or have you had any issues with moisture being trapped under the tape on the cylinder?
Also, could you do a side-by-side with this and the Korth or possibly the Python showing the locks (with side plates off)?
I change it pretty frequently. It only lasts about 2 range trips, and then I take it off, wipe it down with some oil and clean it, and put new tape on.
Very cool revolver, I saw Hippo939's and fell in love. Your videos are just so much more intimate.. its like gun porn haha.
Please make a MR93 Review! Your the best!
Where I can find that revolver to buy
It's an age old dilemma: AP rounds defeat the armour, but have less stopping power as their needle-like form cause little tissue damage,
on the other hand auto ammunition that is able to cause shock is usually not AP.
You can try to reinvent ammo, like russians did with 9x39 SP6 and 9x21 SP10/11, or you can have a high power revolver rounds that solve both problems at the same time.
And with that kind of accuracy it only makes sense to use it as a pocket sniper pistol.
*****
In what way do you say modern MR73's are not on par with the older ones?
Thanks in advance!
Silurus 1988 Modern MR73's are just as good as older ones. But modern MR73 have a .357 barel where the older ones had a .355 barel to be able to shoot surplus 9mm cartridges for training.
Maxime Gosselin
Thank you for the clarification!
Does this mean 9mm cylinders aren't compatable with modern 73's?
Well ... you can always install a 9 mm cylinder in a modern Manurhin but your bullet will tumbel and the accuracy would be rather poor. But I've seen .357 9mm bullet in some reloading stores in france so ... maybe you could install a 9 mm cylinder and shoot 9 mm cartridges reloaded with .357 bullets but that's a lote of work just for shooting a pistol cartridge in a revolver ... i would just shoot a nice .38 sp. if I were you ^^
really nice gun collection, how did you get started collecting guns? (sorry if you've already answered that somewhere)
I can't find Manurhin MR 73 anywhere for sale. I noticed the firing pin is on the hammer. I can see the firing pin breaking at some point. How or Is there any support on this revolver here in the USA ?
+frankgon4 They have support . 10 dealers in the UISA from Chapuis arms the manufacturer
Question, I am interested in the 4 inch police model of this gun. Beretta is importing a very limited quantity of some of these pistols in the United States this year, they are very rare and very limited at this point, I need to know if the police model has adjustable sights! The 4 inch model! From the websites I’ve seen so far it does not list very much if anything about the sites
Hi, Are there tell tale signs that identify a real Mulhouse made MR73 vs. from Chapuis? For instance on the right side of the MR73 there are two screws, one near the hammer and one down at the bottom below the cylinder and to the front of the frame, but on some MR73's I don't see the top screw near hammer like in yours. How about box color, ie., green vs. light blue? Any info you could provide would be much appreciated. Im considering one that doesn't have the screw near the hammer and it comes in a light blue box (where I usually see a green box). Thanks!
If it has the top screw it's one of the first produced. So made by Manurhin. The wood handle shown here was only made by Manurhin (but some have bought it for their new MR73).
The new ones are exactly like the ones made by Manurhin, same quality, same characteristics.
A little late to help you, probably, but maybe someone else will see it: An MR73 will have a serial number beginning with the prefix "HA" if and only if it was produced by Chapuis. All Mulhouse-produced MR73s have one of 16 other single- or double-letter prefixes, depending upon barrel length, caliber, and sight configuration.
Hi there, I was wondering if you could help me out with a question I have about MR73. I have an older production, never fired one and the cylinder when unloaded can move back and forth about half a millimeter or maybe less. Is this normal?
I haven't handled enough to authoritatively say whether that's in spec or not, but mine has no front to back movement.
+LifeSizePotato Hmmmm .... so if you swing the cylinder out, it can't move back and forth slightly at all? If so that concerns me about my MR73. Maybe I should show it to a smith.
+KingKiavash Oh, I didn't think you meant with the cylinder out. It does move back and forth just a hair. With the cylinder in the frame, it doesn't. I'd imagine your gun is fine, they weren't mass produced without quality checks and it sounds like it was barely used if at all.
+LifeSizePotato Phew ... thanks a lot for your response! Finding another Manurhin owner up here in Canada is next to impossible. The MR73 I have has never been shot as far as I can tell and is partly the reason why I can't bring myself to shoot it. I'm hoping to find one someday that has been shot but it seems like that's nothing but a pipe dream. Also I noticed you were quite fond of the Delta pistols, if so, then check out marstar .ca. They have a few of them up for grabs :)
+KingKiavash I actually got my Top Gun from Marstar. The gun is amazing but I can't encourage people to give them money after my experience with their CEO.
I got to fondle a MR 73 once, sadly, I never got to fire it. The owner had it set up as a show piece instead of a shooter.
It will stand here for eternity s
Now brought to you by Beretta.
Dear Sir, in your opinion S&W revolvers pre model 27 are good. What about the model 27 itself? Why do you prefer older S&W pre model 27? I have just bought a 27-2 5" barrel. What do you think about it?
The Model 27-2 is one of the best revolver ever made. I owned a few Manurhin MR73, believe me, I highly prefer the S&W. And I'm French !
One good thing at least : the bluing of the MR73 is gorgeous.
I have been looking for one. Thanks for the detail.
It's cool. I love to hear the durability factor. I however wont shoot that much ever and prefer my occasional shooter puthon for looks and trigger. I can only go by the reviews to judge trigger as I've never seen one let alone shot one
Do you have a Dan Wesson by any chance? I know they are a more common gun than what I have seen you review, but I'd like to know your take on them. I have a Model 15-2 that needs some serious work done to get it fixed and money is too tight to get it up and running again yet.
i'll be waiting to see henry again
The amazing is that MR-73 was born and used like service gun and not like a millionaires caprice like Korth's..... I remember the double single and double action separated adjustment.
Adjusted like high-end luxury watch...
Remember that Manurhin produces on past times the best Walthers PP/PPK
pistols ver made.
Good video.
If I can advice on one thing: never dry shoot a revolver. Use dummy rounds or fired casings, anything you want provided the hammer hits something on trigger pull.
Ruger claims that dry firing will not harm their revolvers. It's in the manual.
MrPotatoesLatkie
Ruger is not quite the fine brand for handguns and I wouldn't take their advices for sacred words.
Ruger knows their product better than any of us. The hammer is hitting a transfer bar and, the firing pin is spring loaded, so I don't think there would be an issue. As for not being fine, it's not cheap, or low class either. It's a solid revolver and, quite reliable. It's up to the job it's made for.
Hello, is it comparable as quality to a smith and wesson performance center? Thank you very much!
Far better.
Can any 357 magnum revolver shoot a 38 sp. Im asking because i was thinking of saving for one
Hello, just wondering if you can do a quick review on the recently imported century mr73 revolvers, you do a GREAT job on these reviews and I really enjoy them. Thanks
Do a video of you reading the part of the gun dealer from the movie Taxi Driver. You have a similar manner of speaking, so it would be an interesting exercise.
I started collecting 357's and this one I really would like to find, maybe at an auction. How much are they today... used one, or with box and documents.
The most desirable versions are the original Mulhouse-produced guns, manufactured before Chapuis Armes took over production. The actual Manurhin company no longer produces the MR73, but Chapuis has produced the MR73 since 1998, using the Manurhin name. You can buy one directly from the U.S. company that imports them if you're willing to wait several months (maybe close to a year). These run around $3,000 to $3,200, I believe. They also pop up on Gunbroker from time to time.
A 99+% Mulhouse specimen with complete box and papers will generally go for more than $4,000 these days (and more still if it's a 5.25" gun with the optional 9mm cylinder). You can generally find Mulhouse MR73s in very good condition, often without box and papers, for $3,000 to $3,500. Thanks to one volume gray-market importer (TheAttic), they are much more common on Gunbroker than they used to be. There's actually one for sale right now on GB that looks to be possibly a pretty nice deal. It's a 5.25" Mulhouse MR73 with 9mm cylinder in apparent very good condition (need more photos), but with no box or papers, for under $3,000.
The easiest way to tell if you're looking at a Mulhouse or Chapuis MR73 is by the serial number prefix. "HA" designates a Chapuis MR73 of any barrel length. The Mulhouse guns used a specific letter prefix for each barrel length and sight configuration.
@@jasonrogers6454 You seem to know all about that gun :) interesting when someone goes into details like you. I only collect 357's so the 9mm chamber is out of th question to me. I'm looking for one in better condition, close to brand new. If it has box + papers is not that important. I have some very rare 357s, first batch Python, a Boa and the titanium Anaconda are the more expensive one's I have and this one is missing in that collection (at least to me). Do you know any other very rare modern day manufacture 357s? Only serial production, I'm not interested in "jubilation" or engraved guns or anything like that, only regular production
@@vabbe71 I should have been more clear on the 9mm cylinders -- the guns are all chambered in .357 Mag., but some come with an additional 9mm cylinder. The cylinder is very easily removed on the MR73, so some folks like to have the option of shooting both calibers.
Nice .357 collection you have. I'd definitely agree that none is complete without an MR73. It's simply the best double-action service revolver of all time, in my opinion. (Be certain that you're not buying an MR88. This is a completely different gun that Manurhin built in a collaboration with Ruger, and it was designed to be much cheaper. It's not remotely in the same class as the MR73.)
Have you looked at Korths? While the Manurhin is the finest combat revolver ever, Korths made in Ratzeburg in the 1970s and 1980s are the finest sporting revolvers ever. Both the MR73 and Korth revolvers are exceptionally durable and accurate, but the Korths are unmatched in refinement. Korths have clearances that are probably too tight to be ideal for a service weapon, which needs to be able to function when filthy, but the precision with which they were built is like nothing else.
The revived Korth company in Lollar currently makes some outstanding revolvers, which are imported by Nighthawk. They vary from the originals in aesthetics (DLC/PVD finish versus bluing; some of the more expensive models have some hideous rails) and a bit in design as well, but they are also highly refined and accurate guns.
One important thing that is not touched upon in this video. How does it compare with s&w when it comes to shooting fast?
how much did you pay for it? was it new?
i ll get mine as soon as i ve got my permit. it retails for about 1400euros in france.
nice guns you have! like the python too.
Is the FIRING PIN soldered or riveted to the hammer, or are the hammer and firing pin molded out of a single piece?
Enjoy your videos....tempting me to start a hunt for the Korth and or the '73. One question, how do you avoid possible chemical damage from the electrical tape, you are using?
I noticed that there are some recent century imports of this gun, I am not sure if they are from austria like the other ones but do you/anyone you know have experience with them? They seem pretty beat up.
I have one, and had another. Some are in better shape than others. The ones in decent shape are actually pretty good, with nice bluing and they aren't too loose. They aren't as tight as a new gun, of course, but they're 95% of it. Another I had, though, was pretty beat up and a little too sloppy for my taste. It still shot fine and was accurate, but most of the finish was gone and the grips were in bad shape. If I were to buy another Century import, I'd be sure it was one of the better condition guns. Those are good buys.
Thank you very much, do you have any sort of information on the MR88? I haven't been able to find out much information on it other than them being more cosmetically like rugers.
They are essentially Rugers (I think Ruger actually worked with them on the gun) with an extra lock point in front of the cylinder. I've never had much interest in the 88s because they're a bit too Ruger-y looking (never been a fan of those) but I imagine they will perform almost identically to a GP100. They are definitely not related to the 73 in any way and won't be as accurate nor as strong, and I presume the trigger won't be as great, either. Still, certainly an uncommon gun and probably worth picking up if the price is good for the uniqueness alone.
MNHJTY
The MR88 IS a Ruger :-)
MNHJTY I'm a french sport shooter and I shoot the mr73. MR88 are not "like" Rugers they are rugers. It's basically a gp100 made in france ^^. The history behind it is that MR73 were too expensives and took too long to make for a large scale deployment to all police and gendarmerie forces so the MR 88 was intended as a poorman MR73. They are better than modern smiths (in my opinion) but not as good and robust as the MR73. A used MR88 is not worth much compared to modern smiths because they do experience stretching.
Nice collection, did you have to import this on a form 6 or was it already stateside ? I am looking into importing one of these, and a Korth, but the paperwork is a pain.
Call Evolution they are importer for the Manhurin
Evolution USA Manhurin
P.O. Box 154
357 Yellow Wolf Road
White Bird, Idaho 83554
phone: 208-983-9208
Beretta is importing then now if you're still interested
Should you be dry firing with the firing pin on the hammer??
It hurts nothing. It can handle 170,000 rounds worth of full house .357 loads. Every military in the world trains with dry firing included. The only firearms that may suffer from dry firing are rimfires due to the design of the firing pin hitting the breech face.
What a truly beautiful object!
i shot an MR 32 once. it was super smooth
It's so the cylinder catch(?) can pass the cylinder guard on closing. Many revolvers have it.
Super clever method to prevent cylinder drag line! What kind of tape are you using?
like your reviews... thanks.
what would be your opinion on Dan Wesson revolvers? Would you make a review on that?
these are going !500.$ good condition...what do you think?
+David Cortez Ah. I see someone else just came from Aim Surplus. :) Just checked, and I'm mistaken. It's Classic Firearms who has them for sale. My bad.
+David Cortez I bought one...
Really excited to check it out after seeing this.
Yes Classic, and they always seem to have good surplus....however, $250 more and get a brand new 686 S&W? Or is this Apples and Oranges? Ever since I saw this video, last couple weeks, I've been checking Classic site- and what do you know!:)
+David Cortez The MR73 is a totally different level.
As LSP mentions in the video, these revolvers have been tested for up to 170,000 rounds of .357 without breaking the pistol. Show me a S&W that's been tested for 100,000+ .357s and I'll get that instead. xD
thanks mruler360
New, in France, the MR73 costs today (july 2020) 2 500 euros at most (US $ 2940). Used Colt Pythons cost in France the same price. Look for the mistake...
New Chapuis MR73s retail for $3,200 in the U.S. Mulhouse-production MR73s in excellent condition generally bring more.
Looking at this video makes my heart hurt because I own a MR 73 but heavily modifiyed for 1500 Shooting. Wish I could revert the modifications someday.
Question. Are all square back full size hadguns like a taurus model 80 and SW model 10 share the same grips?