2nd Generation Saturn SL2 Fuel Injector Removal
Вставка
- Опубліковано 12 вер 2024
- In this video I show you how to remove the fuel rail and injectors from a 1998 Saturn SL2. this procedure should work on most 96-99 SL2 models. I recorded this earlier in the year and sadly do not have the vehicle anymore due to an accident. I hope this helps those needing help with figuring out how to pull out the fuel rail and injectors.
Like my content? Donate to the cause!
Paypal: paypal.me/Jung...
Coinbase: @JungleKing007
Disclaimer: I am not a licensed mechanic and the knowledge I have is purely from research into different problems I have been trying to resolve. As this is a major procedure for this vehicle, I will not be responsible for any damage or other mishaps that might incur should you decide to pursue this repair after viewing this video. This video is intended to be for informational purposes only.
I have a random misfire in cylinder #1. I will try cleaning fuel rail and injectors. Good video!!! Very informative!!!!!!!!!!!!!!!!!!
Check your coils too. You might have a bad one, or the ignition control module as well.
Thanks! My saturn idles rough and after checking all the more obvious things, egr, vacuum, ignition, compression, motor mounts, etc im going to look at the injectors next. This was a big help.
@Haiti News Info Haiti News Info I replaced the injectors, which helped, and the other part of my problem was the top motor mount had settled down and needed replacing. I discovered that later.
Thanks for posting...now I have a great idea of what to do to replace my injectors.
Is this swap similar to swapping the fuel injectors on a 2001 saturn sl
Ty JK! Always appreciate your videos! Starting on my 96 sl2 today! Actually got a set of remand Rochester injectors!
Been, getting intermittent miss fire codes! Fixed the air, and fire! Did induction cleaning, but not good enough!
I've had this car the last 6 years or so! And have always kept decent gas, and additives monthly! Lucas and Seafoam!
But, w/ 254k guess it's time!!
Also putting a WIX fuel filter same time! Making sure it's good!!
Thanks again JK!
i knew this video was old as soon as i heard "good quality gas" gas has been so bad i can smell its off while pumping for years.
I’m going to give this a try. Thank you
Thank you for this great film. May I know what exactly silicon oil did you use on injectors o-rings? I have 3M Silicon Paste, maybe the oil is better?
Gracias era exacto lo que quería good job
thanks helped me out a lot!
how is how i take care of the vehicle going to determine how my injectors are? mine is at 150,000, and i started driving it at 90,000. I put costco gas everytime, but how am i supposed to know if the previous owner did or didnt.. how am i supposed to know or be responsible for that?
What was the lenght of time it took you to do this just an estimate? I need to do this to my car.
Think it took me about an hour or so to remove. That includes time maneuvering the camera and explaining.
thanks
too bad bout your wreck...
was way cleaner than mine under the hood.
I just changed my ICM and coils, spark plugs and wires P0301, P0340, P0341 all cleared. Two days later P0304 pops up #4 spark plug is already soiled, I was hoping to clean the injectors but this looks way too advanced for me.