PSA did great Christmas deals that are being carried over for New Years. Dagger frames both compact and full size are $49.99 and you can get a great variety of complete Dagger slides for less than$200. Non threaded or threaded barrel. I picked up the SW3 Slide with the copper threaded barrel and the full size frame for $250. $199 for the slide and $49.99 for the frame.
Yeah. The deals right now are crazy good! I got mine a couple years ago, when they were more expensive, and I thought it was a great value back then. Now, it's just an incredible value!
I bought a PSA Dagger with the threaded barrel and the lower assembly. I am replacing the trigger with a Shadow Systems trigger assembly. Already replaced mag release as well. All for around $350.
Thanks for doing this build! With all the options for the Dagger I like to see how everyone else is building them out. I'm gonna be building one in the near future.
I'm excited about this one! The slide and barrel came in today and the optic is on the way. Still need to order a light, trigger and extended slide release. I've seen some Dagger videos on UA-cam, but haven't really found videos with the newer custom-looking slides, so I'm hoping people enjoy this series. You can build to a really nice, custom "Glock" for a pretty reasonable price.
so the 27 round pmag fits in the longer pouch, two 15 rounders in the double and a 4 CR123 battery case fits well in the smallest pouch (Mine has a trl7 on it)
Wow! That is a REALLY good deal. It's crazy how cheap they are able to sell parts, compared to just about every other gun company. I guess you can do that when you make it all in house and sell it directly.
Yeah. It does, but not quite as strongly as a 1911 ejects the magazine. Glock mags always seem to come out a little slower just because they're polymer coated instead of steel or aluminum.
I just ordered one of these uppers and lowers from PSA. I ordered FDE but it seems rather green to me in color? Everything fits with my G19 gen 3 though.
Yeah. It's supposed to be compatible with all Gen 3 Glock parts. I hope it is, because I've got parts on order. I like the FDE color, but I am colorblind, so it's hard for me to tell if it's tan or if it's closer to green...
That makes sense. I'm left-handed, as well, but I shoot right-handed. When holding it with my left had, the mag release digs into my hand, as well. It's pretty sharp, too. I installed an extended mag release from GlockStore and while it still contacts my left hand if I'm shooting that way, it isn't sharp anymore and doesn't really bother me, now. It also made it MUCH easier to actuate the mag release with my right hand without having to change up my grip.
Can't wait to see how it comes out! I got another one dropping soon just got my slide in last week! Tune in for the update, but for now check out what I did with my Last PSA DAGGER ua-cam.com/users/shortsEeDAptfwFwE?feature=share
Right on! I'll check that out right now. My slide and barrel just came in yesterday. I'm going to take it out to shoot it today. The optic will be here on Tuesday and then I just gotta get the trigger, light, extended mag release, etc...
@@sawtoothtactical404 Cool man ! Let's see it in action!... I just put a Strike industries Quad comp on it & my homie gave me a CT weapon light... It was all done til the safety tab on the TF TACTICAL trigger fell out after 200 rnds😡.. still functioning but now I gotta get a new trigger shoe
I keep hearing about how expensive glock mags are... even at my local shop they are only $25... I've found them on sale for $20 both 17 and 19 mags... I'll toss one or two in my shopping cart when I'm ordering other stuff... that being said... I love my PSA dagger... kept mine cheap and simple SW3 slide (no optic cut), added a fiber front sight and an aim surplus flat faced trigger... stock trigger just wasn't to my taste, flexy feeling and such... the dagger is my fav shooting handgun I own... I do need a larger mag release button on it still but from there i don't need anything more... I'll be picking up the dagger S frame (full size grip) and at some point will likely pick up an optic cut frame.
Right on! I've been really impressed with it. I got the slide and barrel this week and took it to the range and it performed really well. Went with the SWR slide with RMR cut and TiN threaded barrel. The new video on that will be out tomorrow. I also just got the optic, so that will be the following week's video. I know what you mean about the trigger. It's not terrible, but it does feel a little "flexy" and has a bit of creep to it, like most Glock triggers. I ordered the Timmy Alpha trigger kit to install, as well as an extended mag release, and there will be a video on that, as well. After that, I'll just have to get a good light and she will be done. I'm liking it a lot, so far!
PSA did great Christmas deals that are being carried over for New Years. Dagger frames both compact and full size are $49.99 and you can get a great variety of complete Dagger slides for less than$200. Non threaded or threaded barrel. I picked up the SW3 Slide with the copper threaded barrel and the full size frame for $250. $199 for the slide and $49.99 for the frame.
Yeah. The deals right now are crazy good! I got mine a couple years ago, when they were more expensive, and I thought it was a great value back then. Now, it's just an incredible value!
I bought a PSA Dagger with the threaded barrel and the lower assembly. I am replacing the trigger with a Shadow Systems trigger assembly. Already replaced mag release as well. All for around $350.
That's a lot of value for $350!
The mos system is only great with a holoson SCS!! Aww man i love it!!! Perfect for me!!
Yeah. I'm all about direct-mount if you can avoid using a plate.
Thanks for doing this build! With all the options for the Dagger I like to see how everyone else is building them out. I'm gonna be building one in the near future.
I'm excited about this one! The slide and barrel came in today and the optic is on the way. Still need to order a light, trigger and extended slide release. I've seen some Dagger videos on UA-cam, but haven't really found videos with the newer custom-looking slides, so I'm hoping people enjoy this series. You can build to a really nice, custom "Glock" for a pretty reasonable price.
so the 27 round pmag fits in the longer pouch, two 15 rounders in the double and a 4 CR123 battery case fits well in the smallest pouch (Mine has a trl7 on it)
Nice! That's a good use of those pouches. I remember trying to decide what to use them for, when I first got it.
Take the trigger out polish the contact points with flitz to a mirror polish, drop of oil and it runs fine no complaints.
Nice. Good to know. Thanks!
The two compartments are for a flashlight on the right and a suppressor on the left I don’t even have a gun yet and I know that :)
THEY just had a sale, buy one dagger lower for $99, get a full size dagger lower for $20 more!!!!!! insane
Wow! That is a REALLY good deal. It's crazy how cheap they are able to sell parts, compared to just about every other gun company. I guess you can do that when you make it all in house and sell it directly.
When you have a slide on it it should throw magazine out as 1911
Yeah. It does, but not quite as strongly as a 1911 ejects the magazine. Glock mags always seem to come out a little slower just because they're polymer coated instead of steel or aluminum.
I just ordered one of these uppers and lowers from PSA. I ordered FDE but it seems rather green to me in color? Everything fits with my G19 gen 3 though.
Yeah. It's supposed to be compatible with all Gen 3 Glock parts. I hope it is, because I've got parts on order. I like the FDE color, but I am colorblind, so it's hard for me to tell if it's tan or if it's closer to green...
are the parts shipped to your house like uppers amd lower or do still have to go to shop to get it
The FDE is more green. Much darker than what FDE normally looks like.
as a lefty the mag release digs into my left hand, so I need to sand it down a bit.
That makes sense. I'm left-handed, as well, but I shoot right-handed. When holding it with my left had, the mag release digs into my hand, as well. It's pretty sharp, too. I installed an extended mag release from GlockStore and while it still contacts my left hand if I'm shooting that way, it isn't sharp anymore and doesn't really bother me, now. It also made it MUCH easier to actuate the mag release with my right hand without having to change up my grip.
Debating on building one instead of buying one straight out for my daily driver
I love building guns! It's very satisfying and it's always a fun process.
Where's part 2
I did a whole series on this gun.ua-cam.com/video/Een36bIKzWI/v-deo.html
When the slide is attached it will jump out I know the video is old but if still not noticed it’s funny to mention 😂
It will jump out?
100 dollars i thought they only 59.95 or was that something different?
Yeah. The price has come way down since I got mine.
Can't wait to see how it comes out! I got another one dropping soon just got my slide in last week! Tune in for the update, but for now check out what I did with my Last PSA DAGGER ua-cam.com/users/shortsEeDAptfwFwE?feature=share
Right on! I'll check that out right now. My slide and barrel just came in yesterday. I'm going to take it out to shoot it today. The optic will be here on Tuesday and then I just gotta get the trigger, light, extended mag release, etc...
@@sawtoothtactical404 Cool man ! Let's see it in action!... I just put a Strike industries Quad comp on it & my homie gave me a CT weapon light... It was all done til the safety tab on the TF TACTICAL trigger fell out after 200 rnds😡.. still functioning but now I gotta get a new trigger shoe
I keep hearing about how expensive glock mags are... even at my local shop they are only $25... I've found them on sale for $20 both 17 and 19 mags... I'll toss one or two in my shopping cart when I'm ordering other stuff...
that being said... I love my PSA dagger... kept mine cheap and simple SW3 slide (no optic cut), added a fiber front sight and an aim surplus flat faced trigger... stock trigger just wasn't to my taste, flexy feeling and such... the dagger is my fav shooting handgun I own... I do need a larger mag release button on it still but from there i don't need anything more... I'll be picking up the dagger S frame (full size grip) and at some point will likely pick up an optic cut frame.
Right on! I've been really impressed with it. I got the slide and barrel this week and took it to the range and it performed really well. Went with the SWR slide with RMR cut and TiN threaded barrel. The new video on that will be out tomorrow. I also just got the optic, so that will be the following week's video. I know what you mean about the trigger. It's not terrible, but it does feel a little "flexy" and has a bit of creep to it, like most Glock triggers. I ordered the Timmy Alpha trigger kit to install, as well as an extended mag release, and there will be a video on that, as well. After that, I'll just have to get a good light and she will be done. I'm liking it a lot, so far!