E83 X3 Oil Pan Gasket Replacement DIY - Part 2
Вставка
- Опубліковано 17 бер 2018
- My mailing address for correspondence or swag of any kind is on my about page.
This video is for entertainment purposes only. 50sKid assumes no liability for any repairs or modifications performed by the viewer as a result of the information contained in this video. - Авто та транспорт
This is the best video I have seen on changing the oil pan gasket on an X3. I have an X5 but from what I see they are pretty close. The Bentley manual has you take apart a lot of parts that from this video need not be taken apart. Thanks so much Jason, I do not fear the job now.
Just wanted to say thanks man. I just finished replacing my Gasket following this DIY very informative and saved me about $1400.00. Really aborreciste it
Hello,
Just wanted to really thank you for this great video. I followed carefully your instructions and tips. Without it I would not have managed to change the oil pan from my e91 330xi. Big thank from France!
Great video! Been waiting for Part 2 for a few days. I have a 2005 E83 with manual transmission. I've been following your E83 project. I definitely have rear main seal leaking and possibly oil pan gasket leaking.
Great job Jason? Loving the foot action ;)
that was some olympic level shit lol
Not sure if mentioned in the e46 oil pan videos but if there is difficulty with the steering linkage you can unlock the telescoping steering wheel to make the back and forth play easier....I believe this one had the same manual locking bar.
Good contents. if you guys plan to change oil pan gasket soon, I highly recommend to change the diff/CV axle seals and O-rings. I did not do it and now regret due to oil leaks. If I do it again, I would also change the engine mounts.
Great job .
Well Explain,!! Thanks for Sharing.!! I did one 07 X5 , and Run good for about 5 Minutes,!! And Now starts , but it really bad .!! 😮😮😮
Top footage 👍
I really enjoy your videos on the 330I sadly I traded my 330ci for a 2000 ML320. I will continue to watch your videos you post, because you explain with such detail. And I enjoy all of that. Hopefully you come across a Mercedes ML320 to fix I'll be looking out for those videos.
yeah wait in line , first we gonna do a e90 hahahhahaa
Great job!!!!!
Hy Jason, the foot work´s great ;-))
Goop makes the world go round...
Great job my friend because you did it on the floor.....another question.Is it possible to change the piston rings and big end bearings too?I am asking because i think is difficult for the 1st and the 6th cylinder.Thanks!
Dope Channel
Is that square hole supposed to be expose like that on the trans ??? Just got a e83
8:45" LOL! Certified BMW Acrobat.
I think I am going to do this on my sons 2000 323i. I imagine that should be a bit easier.
There's two bolts in the bottom of the oil pan t10 there kinda right below that channel that is where the axle would slide through. Are these to adjust the shaft tunnel?
FIY - Bavauto sells an oil filter housing gasket that uses the new Dupont viton seal. I think you mentioned this on another video.
ah i don't even remember lol
😮😮Did u check the oil pump nut to see if it's loose . Usually gets loose with high mileage ones.
Hello. I have one questions . After replace oil pan gasket on bmw x3 2.5l 2004 when i turn engine on mecking noise luck like from the belts and when you turn wheels the nois going more up and the stearing wheel going heart sorry for my language maybe you understand thanks.
Just a comment on your opinion of rtv on the gasket. As far as the oil pan is concered i think it would not only be a bad idea to do it but honestly a necessity for it. My e83 is leaking like a stuck pig right now at the oil pan and has been since 110k now 170k. For all the work that's involved to change it and the longevity of that gasket max 10 years, really why not try it?
Awesome video thank you! BMW's aren't really rocket science to work on compared to some other brands. They can be tedious or not depending on what it is but what isn't these days? Definitely didn't look that bad. Would you say 10-12 hour job or way less?
Yeah about 10-12 sounds right. Definitely wanna break it up into 2 days. Working on the ground takes it outta you
Thanks for the video, I have the same issue with a 330xi 2008 automatic and nothing available on youtube for this model with x drive. I think it is quite similar with your x3 nevertheless. would you advise to change the oil pan bolts with new ones although they are in good shape?
And do you think there are other gaskets made reachable while we are there and that are therefore worth to change ?
Replace all aluminum oil pan bolts
Guys I took out both ECU and put it back in, now my dashboard only shows gas miles left but dosent show MPH, Time or in the radio and MPGs it shows only this - -:- - what can I do need help plz 50's kid help me BMW 328i 2000
BMW oil change interval at work there.
What was the white stuff mixed with engine oil? Antifreeze or transmission oil?
had to be ATF or stop leak product of some kind
I alays use goven cleaaner to clean engine parts & get exelent results & fast,
can't use it on aluminum -- oven cleaner has lye and that will react with aluminum
Is this same procedure on 2008 x3?
Prob not.. diff engine
Outstanding video 🎉🎊