Spearfishing and Freediving Fins 101

Поділитися
Вставка
  • Опубліковано 29 чер 2024
  • In this video, Andrew goes over the basics of long fins for freediving and spearfishing.
    Social Media
    Instagram: / divingsports
    Facebook: / divingsportsca
    Shop Online
    www.divingsports.ca/
    Gear featured
    Beuchat Mundial One-50
    www.divingsports.ca/collectio...
    Cressi GARA 3000 LD
    www.divingsports.ca/products/...
    Cressi GARA Modular Impulse
    www.divingsports.ca/products/...
    Beuchat Mundial Sport
    www.divingsports.ca/collectio...
    Beuchat Mundial Elite
    www.divingsports.ca/collectio...
    Seac Motus Camo
    www.divingsports.ca/collectio...
    Beuchat Mundial Carbon LS
    www.divingsports.ca/collectio...
  • Спорт

КОМЕНТАРІ • 61

  • @charlietran3420
    @charlietran3420 2 роки тому +3

    Really like your vids, very clear, genuine, and easy to understand

  • @festfreak
    @festfreak Рік тому +2

    Just the video I need! Thank you guys! 🙏

  • @paulmarks7185
    @paulmarks7185 3 роки тому +3

    Very informative. Really helps.

  • @sergepikhotskiy
    @sergepikhotskiy 2 роки тому +3

    Thank you! Very informative video!

  • @WatermanSurin
    @WatermanSurin 3 роки тому +2

    Awesome content! Very informative :) thanks!

  • @isaganihernandezchannel1790
    @isaganihernandezchannel1790 2 роки тому

    thanks idol for sharing knowledge about this

  • @joshs3916
    @joshs3916 5 місяців тому

    Great video

  • @TheWillySands
    @TheWillySands Рік тому

    Thank you

  • @chadmerkley9465
    @chadmerkley9465 Рік тому

    What if I'm a smaller fella, but wanting to do spearfishing (I'm NOT good)? Do I go floppy fin or medium?

  • @andyvaldez212
    @andyvaldez212 3 роки тому +6

    I'm in between the Mundial Sports and the SEAC Motus... I primarily want to get into freediving and as for weight and strength, I'm 215lbs... and squat 405 .. however, I don't think that strength in the gym translates well in water because I do tire out pretty quickly in my Scuba fins... (Scubapro GO Sport) of course, they aren't designed for freediving but still. What would you recommend?

    • @DivingSports
      @DivingSports  3 роки тому +6

      Hmm, normally for someone your weight I would suggest going with the Sport, but you're right strength in the gym doesn't necessarily translate into the water in the same way. Long fins require different movements and muscles compared to shorter fins. Usually you're looking to kick efficiently, not so much powerfully. Different schools of thought there though. But at least for freediving you want to be more efficient than powerful, spearfishing can be the other way around depending on the person. If I was you I'd probably go with the Motus, they'll be easier for you to learn proper long fin technique with, as they're softer. I would say that Motus are medium soft, mundial elites are medium, and the sports are medium/hard. The motus will be easier to learn with but probably won't carry you down to super deep depths. It really depends though, if you're diving around currents you may want something stiffer, vs calm waters and pools you can use softer fins.

    • @andyvaldez212
      @andyvaldez212 3 роки тому +2

      @@DivingSports man thanks

    • @austyn4209
      @austyn4209 2 роки тому

      Dont do it bro, get a pair of carbon fiber leaderfins they are damn near the same price and way more efficient

  • @faisal3135mak
    @faisal3135mak 3 роки тому +3

    What is the difference between fins with 80cm of tall and 95cm of tall , does that effect of my speed under water if I freediver ? And which one is the best for me if I look for more speed

    • @DivingSports
      @DivingSports  3 роки тому +3

      In theory, longer blades will push more water giving you more power and propulsion. However, there are more factors you'll want to consider, like if the blades have a more graduated stiffness meaning it's stiffer at the base and softer at the tip, or if the stiffness is the same across the blade. If you purely want speed, you'll most likely want a harder carbon blade. Although you'll probably want to consider efficiency, because while a harder blade will give you more power and speed, it may not be suitable for you based on your strength and weight. Typically freedivers are going to choose a softer and longer blade for efficient kicks, and a spearfisher will choose slightly stiffer and shorter blades for power and maneuverability. To each their own though, everyone has their preference, but if you purely want speed I would look for stiffer fins.

  • @TheFriskyBoy
    @TheFriskyBoy 2 роки тому

    Hi, excellent video.
    I have mares avanti excel which i use for snorkel mainly (they are a shorter that the ones you show) I would like to do an apnea course for helping me to introduce into spearfishing. My weight is 178 pounds, can I start with my actual fins or should I acquire the gara 300 or seac motus? Thanks!

  • @humanemulator5297
    @humanemulator5297 3 роки тому +4

    Can you make a video on fiberglass and carbon fiber fins? Thanks

  • @Neo-fb5ry
    @Neo-fb5ry Місяць тому

    the quitest video on youtube history

  • @michaelcrabtree2939
    @michaelcrabtree2939 3 роки тому +6

    If you have an extra 500$ to spare go with the carbon fiber fins...if your beggining freediving...stay with plastics. On cheaper end ...you can always upgrade.

    • @austyn4209
      @austyn4209 2 роки тому

      Dude leaderfins has a pair of carbon fiber for 250$ and they are good fins.

  • @TheBowhunterinNB
    @TheBowhunterinNB 11 місяців тому +1

    I am in NewBrunswick Canada and have been trying to find out spearfishing rules , can’t get a straight answer even from DNR or ocean and fisheries.

    • @DivingSports
      @DivingSports  10 місяців тому

      I would always try the government website to see what they say

  • @MarcosIturribeitia
    @MarcosIturribeitia 2 роки тому

    I recommend You to use short fins if you are not a superhero with powerful legs to move heavy long fins.

  • @Kitty.co1
    @Kitty.co1 Рік тому

    Hi ! I don't know what to choose betwen the Seac Motus fins and the Cressi Gara Modular Impulse. My performance is 75m dynamic apnea and 20m depth apnea. I'm 127 pounds. Did someone test both of them and can help me to choose please ?

    • @Kitty.co1
      @Kitty.co1 Рік тому

      For information I found the SEAC Motus for 70$ and the CRESSI Gara Modular Impulse for 110$.
      Any advice ?

  • @tjpereira1564
    @tjpereira1564 3 роки тому +1

    Would you recommend for spearfishing? I don't want carbon fins or fiber glass cuz in Portugal I am always on top of rocks :/

    • @DivingSports
      @DivingSports  3 роки тому +1

      These would be great if you're a beginner, a bit lighter, and diving in places without strong currents. If you're heavier and diving in stronger currents, they might not give you enough power in the water since they're a softer fin.

    • @tjpereira1564
      @tjpereira1564 3 роки тому +1

      @@DivingSports fair enough... Thx 👌

    • @miopera40
      @miopera40 3 роки тому

      If you are fishing the softer it will get against currents is the gara 3000, higher than that will tire and cramp your legs after a while. Gara 3000s are not a beginer fin, beginer fins are softer for those who don't kick well yet, these are a fishing fins that will handle most situations you will encounter, the performance of fins 5+ times more expensive is not worth a dime for fishing to be honest, no wonder why Cressi still keeps them selling after 30 years.

    • @tjpereira1564
      @tjpereira1564 Рік тому

      @@miopera40 well... That was actually a pretty decent thought! But I'm actually thinking of buying the c4 Pershing 🤔

  • @kenlim8873
    @kenlim8873 2 роки тому

    I'm do fishing from shore, do you still recommend long fins?

    • @austyn4209
      @austyn4209 2 роки тому

      Yes bro, diving 10 feet is wayyy harder than you think most people can only hold their breath for around 15 seconds while kicking

  • @harryortega6869
    @harryortega6869 3 роки тому +2

    Do you know wich is the difference between cressi gara modular y cressi gara nery?

    • @DivingSports
      @DivingSports  2 роки тому +1

      The Gara Nery fins don't have water rails going down the blade like the Impulse fins do. I'm not sure about how stiff the Nery fins are.

    • @harryortega6869
      @harryortega6869 2 роки тому

      @@DivingSports 🙌🏼💪🏼

  • @jamesmyers777
    @jamesmyers777 Рік тому

    Your audience is smart. You do not need to repeat yourself.

  • @miinpajamas6680
    @miinpajamas6680 3 роки тому +3

    What is the cressi gara impulse made of?
    Fiberglass?

    • @DivingSports
      @DivingSports  3 роки тому

      Plastic :)

    • @user-gp6oi1jb5b
      @user-gp6oi1jb5b 3 роки тому

      if you are getting started the Cressi Gara Modular Impulse that cost like 100 bucks are really good like you dont need to spend a shit ton of money

    • @austyn4209
      @austyn4209 2 роки тому

      Dont do it bro, get a pair of carbon fiber leaderfins they are damn near the same price and way more efficient

    • @miinpajamas6680
      @miinpajamas6680 2 роки тому

      @@austyn4209 they are not the same price :(

    • @austyn4209
      @austyn4209 2 роки тому

      @@miinpajamas6680 i spent 500$ on my c4 carbons alone you just have to know a quality company with a good price such as leaderfins. They make a really good product.

  • @brad2663
    @brad2663 3 роки тому +1

    Can you use spearfishing fins for free diving

    • @DivingSports
      @DivingSports  3 роки тому

      Generally, yes. Higher-end carbon fiber fins are different though. Different models for different purposes, but if we're talking about plastic then yea they're dual purpose for the most part. You more so want to think about the stiffness. Generally, medium to hard stiffness blades are preferable for spearfishing, and softer blades for freediving, but everyone has their preference.

  • @imranspearfishing0909
    @imranspearfishing0909 3 роки тому +1

    😳

  • @volkankvncsy385
    @volkankvncsy385 3 роки тому +1

    So fiberglass looks better for using underwater photography with for fun freediving😅 is it?

    • @DivingSports
      @DivingSports  3 роки тому +1

      I think you'll more want to think about the conditions you're diving. There are a lot of people including myself who use long fins when doing underwater photography, and some people who use shorter fins for more maneuverability. If you're just doing underwater photography I don't think the material matters that much since you're typically not going for depth or bottom time, just deep enough and long enough to get the shot.

    • @austyn4209
      @austyn4209 2 роки тому +1

      Dont do it bro, get a pair of carbon fiber leaderfins they are damn near the same price and way more efficient carbon fiber has more pushback and flex therefore give more propulsion

    • @volkankvncsy385
      @volkankvncsy385 2 роки тому +1

      @@austyn4209 hımm:) thanks;)

  • @brianchen1019
    @brianchen1019 3 роки тому +2

    Is modular impulse too soft ?I wanna buy one ,but worry no power...
    Is it good at scuba diving or freediving?

    • @leonardobarbosa8239
      @leonardobarbosa8239 3 роки тому +1

      Modeular impulse is to freediving, i think. Its soft going to medium.

    • @DivingSports
      @DivingSports  2 роки тому

      I wouldn't suggest the Modular Impulse fins for scuba diving as they're too long in my opinion. In terms of softness, depends on you. They're great for lighter divers, looking for a soft freediving fin.

    • @austyn4209
      @austyn4209 2 роки тому

      Dont do it bro, get a pair of carbon fiber leaderfins they are damn near the same price and way more efficient

  • @michellegaquit7022
    @michellegaquit7022 2 роки тому

    Boss m.h pins cressi blue color boss

  • @alexcimafranca8677
    @alexcimafranca8677 3 роки тому +1

    How much the prize long fins 101

    • @DivingSports
      @DivingSports  3 роки тому

      Please visit our website for up to date pricing

  • @nitrogenus
    @nitrogenus 3 роки тому +1

    Bla bla bla bla. Que coñazo!!