Nylon Disc Pad Removes Paint, Rust - Strips Wood, Metal, Brick, Cement
Вставка
- Опубліковано 5 жов 2024
- Nylon disc removes and cleans everything, can strip without scratching. These paint and rust strippers easily remove or clean finishes from wood, metal and other surfaces. The flexible discs are made of a nylon Scotch-Bright™ material and fit a standard electric drill or angle grinder. This stripping product conforms to the contours and curves of your work surface and reduces any gouging. They are designed to strip with minimal material loss and will not damage the surface like wire brushes would scratch.
Move quickly. Moving the stripper disc too slowly creates heat. The heat will melt the paint or finish. The melted finish will clog the pad and will reduce the results and increase your time.
The paint and rust strippers come in both heavy and light duty options. They work on cement, ceramic, scale and plastics. The pads remove oxidation and will clean up weld lines.
They are also useful for automotive repairs like preparing areas for auto body filler, fixing dents and removing rust, paint and under coating.
The discs are sold as Black Hawk™ Easy Strip and Clean Discs, and Strip N Clean. They are also sold by 3M™ Paint and Rust Stripper.
Uses include:
Removes paint, rust, scaling, glue and other adhesives
Cleans weld lines and weld splatter
Soft disc Quick, easy removesWorks on wood, metal, brick, plastics, cement
Clears surfaces with little material lost or gouging
Auto body surface preparation
www.mrhardware....
If you don't have an angle grinder, get one. They are one of the most versatile tools you can own.
Guys like this guy are the salt of the earth and invaluable, the amount of respect I have for humble guys like this who love to help others I can't put into words what a great bloke thank you for educating us and wish you all the best
Thank you Mr Hardware! 😊 I had no idea how to remove the many layers of chipped paint on my patio deck railing. thought I was going to have to use a sanding block and scrub it with my old arthritic shoulder. I’m widowed and I had no idea what to do. God bless you and thank heavens for UA-cam. 👍🏼👏🏼👏🏼👏🏼
I’m removing 3 layers of paint and stain off a very large deck with a Wagner Paint Eater, it’s very fast and effective. Look it up here on UA-cam.
Thank you for answering my exact question. Couldnt decide if i wanted to upgrade my drill or buy angle grinder for my paint rust removal project. 4x the speed/power wins baby!!
Short, on message and to the point. The way YT "do it yourself" video's should be presented.
Great - I'm getting one of them to fit on my black and decker drill - trying to strip layers of paint off an old kitchen chair with stripper and paint stripper tool - after 3 hours I haven't even scratched off the first layer of paint and looks like there's another three to go - from wishing I hadn't started, looks like there's hope yet!
Mr Hardware. I'm going to remember your name. I love it when I can get online, find the info I need without a bunch of other B.S. and I could have bought the pad and ruined it because I wouldn't have known to keep it moving but you gave me the info I needed. Perfect youtube video!
Great tip about keeping moving. I tried to remove paint from a garage floor. I was trying to do too much at one time.
Did it work was it able to remove paint of the floor
Excellent presentation and production 👏. Thanks for the great tips 👍!
All the way up from Da U.P., Mr. Hardware ROCKS!!!! Great tips Gil!!!!
I am repainting my front door Thanks for sharing
Oh my god.... hey buddy... I see you all the time in Gilbert's. I seen you a few different times when looking for videos. Awesome... Guy's, this man knows his shit.
Thanks from England.
used the angle grinder with the paint and rust remover disc. 3 layers on the deck rails. works pretty fast, paint just flies off. messy and dusty, wear safety glasses and a mask, move things a safe distance away.
Great Public Service..
You are simply the best. Thanks so much! Cally Robyn
Seriously…no one’s gonna mention the measuring tape suspenders?!!!…
Seriously…NO ONE?!!! 😍
Well I’d like a pair…new subbie here 🙋🏾♀️
Isle 10, on the left.
Thanks again Mr Hardware!
Great information so thank you for the video! I will say its a little difficult to know the speed you moved the pad on the door with the time lapse though....
Thanks for the video, how do you clean them when they get clogged with paint ?
Run it gingerly over the end of a piece of metal. Careful, very carefully.
Bless your heart for this informative video! What are the best grit, speed, and type of material for the disc to remove faded paint from car steel wheels? Thanks a bunch!
The heavier the paint, the courser the pad. Speed is normally full speed, except when I’m trying to prevent the paint from heating up and melting into the disk.
thanks a lot Mr Hardware
Thanks Mr. Hardware!
Great advice
Thanks for the tip!
thank you for this helpful info!
Very helpful!
How do these compare to angle grinder flap disks for removing paint from wood?
It is coarser, grabs more material and does not clog as easily as the sanding flapper. Plus it wears to a shape which helps when getting into tight areas.
Can the angle grinder be used on soft wood like garage doors and frames ? Or will the drill bit be better for that
The grinder has better feel and speed, you will need to learn to use very light pressure and keep it moving so as not to melt the paint or dig into the wood. The drill is much slower but safer.
These disc come in different colors. Does the color denote any difference between the disc (ie grit) or just the manufactures color of choice?
I Believe the black one is the courses and the blue one is like a medium course. However both of them are very aggressive. I’ve never seen them come in a fine or medium fine.
Very cool
Excellent video! Can I use the striping disc for exterior wall paint removal? Thanks!
I use that sh*t on everything! LOL
@@blairgilbert7606 LOL, love this advise!
do you have any recommendations for the blue dye that can come off on the metal when you're removing paint in how to get that blue dye off? it can be a pain and I don't want to do much more material removal?
Thank you!
As I was washing the basement floor with detergent, I agitated it at first with a nylon scrub brush then a wire brush. Can you use it with water to loosen paint on a basement floor and not create dust?
As long as your equipment is safe to use in a wet environment.
@@blairgilbert7606 - Thank you!
Dumb question but I have thick glue on a frame that I have been trying to remove using glue remover but seems to take forever. How well would this work to remove thick hard glue suck off metal without damaging the metal?
Thanks :)
Hard glue should come off very easily as long as you don’t let it get warm and melt and fill the pad. Keep the machine moving back-and-forth and don’t let it sit in one spot long enough to get hot.
Hi I have a quick question. Can I use a dremel tool to strip paint off of a wheel? Or do you think it's not powerful enough?
Consider wrapping a drill bit with steel wool at slow speed until you build up a ball over the drill bit. Then use that at slow speed to strip the wheel.
i want to re-paint my interior bedroom doors. i have an angle grinder. can I use this on the wood to quickly get the bulk of existing paint off before sanding?
Yes, but be careful not to remove much if any wood. Let the grinder float over the surface and not get the finish too hot or it melts and ruins the pad.
Is this a good tool and disc for stripping an garage? I have garage with wood siding that need to strip and I don’t want to wreck the siding. Job is about 600 square feet.
It may take 3 to do 600'. Be sure to keep the tool moving so as not to melt the old paint and fill the disk.
I want to remove White Knight Tile Paint from slightly textured 1970's bathroom tiles. I've tried an abrasive disc on my drill. It's extremely slow, and misses a lot due to the depressions on the tile surface. I tried paint stripper as well. That was extremely messy and also ineffective. Might just re tile instead.
Hi. When it comes to using an angle grinder to remove rust, what rpm grinder would you recommend? I have a 12,000 rpm angle grinder and I have a hard time finding disks for them, and I feel like I would be better off with like a 7,000 rpm grinder. What is your experience with this? Thanks!
I prefer the 6,000 to 8,000 speeds. I get all my work w/slower speeds and safer w/less chance of exploding an accessory.
What’s the best stripper disc for automotive panels without inducing heat to protect from warping?
3m and Norton both make a drill and a grinder stripping disk that is pretty cool running.
@@MrHardware1 many thanks 🙏
Will work on paint on wood ?
And should I use any chemical or liquid with it
Ye, and no chemicals
on latex?......thank you boss
Contractor painted rusted flaky and pitted fence post with black rustoleum paint without sanding or grinding first. Post look flaky and rough. The new paint is 3 days old. Can I remove the new paint with this to grind and sand off the rust so I can repaint the post again the correct way?
I sure would, your other choice would be to use paint stripper.
Cool
Did he say,, keep your tool moving ??
Problem is is those tight little corners Grinders too big what to use then
How to remove outdoor paint off of cinderblock wall. Don’t want paint flecks all over the garden, what do you suggest?
Cover the garden w the thinnest plastic drop cloths or get a grinder w a vacuum attachment. Some municipalities require the vacuum system because of chances of lead paint.
What is the grinder you're using on this video? It seems like a very light grinder. I have purchased 1 and my friend another, but both of them; are heavy to handle. The one you have on this video appears to be a lot lighter. Please, if you have time; can you please tell me the grinder you're using?
I believe that one was a Skil, I also have a Dewalt, both are small and lightweight. We use them pretty hard and they only last a few years as they are the ‘homeowner grade’.
What kind of disk do i need to remove paint from concrete?
They all do, don't use a lot of pressure.
give me some names
Wagner Paint Eater comes with a disk that removes paints and stains from wood, concrete, and steel. Lots of information here on UA-cam when you type it in.
Could i strip paint from metal fence posts with those disk?
Of course, keep it moving to prevent the paint from getting too hot and melting
@@blairgilbert7606 Thank you.
Great demo!! Thank you! Can i use the 3M Paint & Rust Stripper to remove old paint off a concrete porch? Or is it only for wood surfaces?
I use that wheel on everything, go lightly on very rough surfaces.
@@MrHardware1 thank you for replying!!
Is there any way to clean the pad once it get filled with paint?
Sometimes running it against some stationary metal, like a fence post, bench vise or other large strong metal structure it will help clean out some of the paint.
What is the brand and model of the grind pad that he recommends?
3-M makes one, Norton does and I think I’ve another manufacturer/distributor that makes one. I’ve used both the 3-M and Norton pads and like them both.
Never mind the disc ,where can I get the braces ?
You from the north? Lol. Gilbert’s Hardware of course, isle 10. I’ll be there today!
Can u use those pads on brick?
Yes, but it won’t get into the voids w/out wearing out rapidly.
What is the name of the blue pad ? and where can i buy some ? need to strip a car . I see it a Norton , but they make so many different pads . Thanks
Norton's is a RAPID STRIP WHEEL, #04015. And 3M is a PAINT AND RUST STRIPPER, 7771NA-CC
Some idiot painted my stone basement with drylok paint so now my basements wall don't breath. I need to grind it off. I'm going to try that pad with my angle grinder. If you have any other ideas please let me know.
I don't mind the drylok, I suggest you drill holes (about 1/4") in the bottom course of block to drain out any water. You may need to drill several holes in the first block to find the voids in the block. Then drill a hole every 4' or so to release any trapped water. Now wait for a heavy rain and 4 hours in go downstairs and see if any water is coming out the holes. The water will indicate where your landscaping, or cement, is low and letting water drain towards the basement wall. There is where you need to do water management and get rid of the water and the wall will be dryer.
wanted to see the drill one demonstration because i hate angle grinders... why didn't you demonstrate both options?
That drill one is hard to find n Canada
How do you get it to extend outside the guard?
The guard on that grinder only protects the back half of the ‘blade’ that’s on it.
No, I second this question. When I install a Gator stripping wheel, it sticks up slightly beyond the guard, but rubs against the guard lip. It's a 4.5" grinder and a 4.5" wheel. I can't find anything that shows how to install one that won't rub.
Hi what disc was this 40 grit flap disco or 80
40 is for removal, 80 is for finishing
These pads are not cheap. I used one to remove paint from a concrete surface and the pad was eaten away in no time.
Its not work really Mr hardware grid peper better then this