3 wheelers are so unstable front end with single wheel for steering, Personally I would use single wheel rear for drive using a sway arm from motor bike and duel wheel steering front would be so much better, Could even use individual front steering sway arms on front so it lean over when steering, ya know the ones I means, Coz leaning. ua-cam.com/video/4vtOcou_qXQ/v-deo.html
Hell yeah brother! Sick week sounds awesome. I'd love to meet Cleetus or Derek sometime. Hope you get lots of content. You doing any streaming during the event?
whenever i drill i make sure to stiff arm it or put it against my forearm, leg etc so its already against something and cant get a free swing and 300* me, maybe consider a way to mount it lower?
Ahh I feel Smrt. Watching the process of figuring out the two upward bars where the camera is just off to one side, found myself leaning to the right trying to see if they were lining up properly like I was right fuken there, lol. Blue Dream is a helluva strain.
Allright, man... ya got me... it was the little trike.. I mean ... I love the lawnmower build... but, I'm a sucker for a trike... Mebbe I'll start something soon.....
Remember when you turbo a single cylinder engine, you need an air reservoir between the turbo and the inlet 4 times the volume of the engine. Reason being single cylinder, single exhaust valve spinning the turbo once every 4 strokes. Otherwise you are spinning and stopping the turbo.
I did the same thing you did with the drill, but with a Milwaukee Hole Hog. I had a 3/4” 16” auger bit, and was trying to drill through a 2x6 length wise for a gas line. It grabbed a knot, swung around the Oh Shit handle and smacked me across the bridge of the nose, giving me a bloody nose and concussion. Fun times. At least yours wasn’t too to bad. This is a cool little pit trike your building. Can use the lawnmower as a push/pull ride. Cheaper and cooler then a smart car
Built a lot of karts. Vacuum fuel pump off of the valve cover. Pull the governor. Stiffer valve springs. Bigger eBay carb with huge filter. Open long header blowing the debris away from the drive tire. Good fuel. That 6 hp turns into about 13.
I can't wait for you to experience that sticky ass surface that is Bradenton motorsports park! Koller track & next door to the freedom factory, welcome to my backyard
Aside from the triangle plate at the back, you'll want some kind of gusset on the frame neck tube, mainly just to prevent any twisting between the top tube and the two bottom frame tubes. You could put some around the bottom of the frame, but I really don't think they'd be necessary at all, almost all the force is downward at those points.
I need some part numbers or link to some of these parts and a sketch or drawing with some dimensions hahaha. Watching this video just makes me want one lol
This is awesome man, have u ever built anything with electric motors and stuff? I think a 72v boma or vevor motor with a 72v kelly controller would work great on this build!
Love the idea and how you ended up with the dual brace than the high camel bar at first ... Hope there is anyway you can make the seat braced and bit far from the fuel tank
@@Boostedlifestyle I sent you some videos of my electric build on Instagram…it’s super fun honestly. I can tune it with a usb to my pc now it’s cool af
You don’t wanna be going a million miles an hour on that thing do you so I’d stick with a 48v system. But get a high discharge battery and a good controller and send some current through it. It’ll have torque for days. Screw the lawnmower you can tow the ‘stang 😀😂
Love this build.... I had a thought for the seat. if you made the seat pan part of that triangle bracing you spoke of joining all the bars together then all you'd need is a rear brace down to the frame above the axle so the load is distributed evenly. Might look rad?? also gotta add some led lights so folks can see you... especially being down so low. Either way.... I'm sure youre gonna kill it as usual! Good luck!
Im still waiting for The Mini Roy!!!! Also use elecrtic tape or duct tape to hold it in gear for the drill it will help lol maybe ill just order a nice dewalt and send it to you.
Need a custom pit trike to tow around my promod lawnmower now I guess 😂 but for real 1 week until sick week! Let's get this done 😁
3 wheelers are so unstable front end with single wheel for steering, Personally I would use single wheel rear for drive using a sway arm from motor bike and duel wheel steering front would be so much better, Could even use individual front steering sway arms on front so it lean over when steering, ya know the ones I means, Coz leaning. ua-cam.com/video/4vtOcou_qXQ/v-deo.html
Idk if this will help but most mini bikes have 2 bars across the top where u sit, not one
Yes turbo
Haha Awsome! Just wondering when you are planning on more mini Roy content !
Hell yeah brother! Sick week sounds awesome. I'd love to meet Cleetus or Derek sometime. Hope you get lots of content. You doing any streaming during the event?
Kyle Nose what he's doing! Keep up the good work! My wife and I enjoy the content.
Can you tell me what size pipe you used for the mini trike? Thank you for all the awesome videos.
whenever i drill i make sure to stiff arm it or put it against my forearm, leg etc so its already against something and cant get a free swing and 300* me, maybe consider a way to mount it lower?
The two rear tubes are a good design choice. Gina will be happy you decided against the Canadian Castrater single tube. 😄
I like how you’re going out of your way to learn new skills. Probably the best content you could have for people to relate too
Heck yeah 😁 I always wanna learn new stuff!
Starting to move up as my favorite Canadian. That's a sick little buggie frame
Heck yeah man!
Definitely turbo it. 👏👍
Building things like cars and camera… I like it
Ahh I feel Smrt. Watching the process of figuring out the two upward bars where the camera is just off to one side, found myself leaning to the right trying to see if they were lining up properly like I was right fuken there, lol.
Blue Dream is a helluva strain.
Wouldn’t it be nice to be in a nice warm shop in Edmonton where things are more accessible and cost less then Ft McMurray 😝
MAN THAT'S GONNA LEAVE A MARK!
Allright, man... ya got me... it was the little trike.. I mean ... I love the lawnmower build... but, I'm a sucker for a trike...
Mebbe I'll start something soon.....
Remember when you turbo a single cylinder engine, you need an air reservoir between the turbo and the inlet 4 times the volume of the engine. Reason being single cylinder, single exhaust valve spinning the turbo once every 4 strokes. Otherwise you are spinning and stopping the turbo.
Your learning as you go... that my friend is called progress! Good work man!
I did the same thing you did with the drill, but with a Milwaukee Hole Hog. I had a 3/4” 16” auger bit, and was trying to drill through a 2x6 length wise for a gas line. It grabbed a knot, swung around the Oh Shit handle and smacked me across the bridge of the nose, giving me a bloody nose and concussion. Fun times. At least yours wasn’t too to bad. This is a cool little pit trike your building. Can use the lawnmower as a push/pull ride. Cheaper and cooler then a smart car
Those wheels and tires Are sick
Them tires make it look so cool 😎
That last design looked way better
Like your approach, trial and error. Good energy. Really nice project.
Awesome! Looking forward to this latest build and your trip to Merica and the freedom factory! 🇨🇦🙌
Remember we do pit bikes races at forestburg a couple times a year...
Hell yeah!!! That thing is AWESOME
What happened to the mini leroy build?
It turned into the mower
Man nobody listens 😂 it's a space issue Its too big to build in the garage with two cars in here. It will make a comeback don't worry
Mini leroy will be the best build to date!!
Id definitely say its better with a turbo send it!!
Dude your going to be the talk of the pits!
That's the plans 😂😂
You should keep the tires that size. Love the meaty look with how low it is. Reminds me of a Rpf1 17x9 look with thick tires.
Frame looks way better the second time
Gina be a sick little build
Built a lot of karts. Vacuum fuel pump off of the valve cover. Pull the governor. Stiffer valve springs. Bigger eBay carb with huge filter. Open long header blowing the debris away from the drive tire. Good fuel. That 6 hp turns into about 13.
I'd like to do a 212 build !
5 days, 40 hrs. (80) you got this, Killin it!
Sorry to hear you're going to be sick for a week. Get well soon! ;-)
I can't wait for you to experience that sticky ass surface that is Bradenton motorsports park! Koller track & next door to the freedom factory, welcome to my backyard
Best candadian on the tubes
Nice frame !
Thanks for the tips !
Ill Will build a few with 420cc motor .
Great job love your work more please I'm a fan love the little trike thanks for sharing
Aside from the triangle plate at the back, you'll want some kind of gusset on the frame neck tube, mainly just to prevent any twisting between the top tube and the two bottom frame tubes. You could put some around the bottom of the frame, but I really don't think they'd be necessary at all, almost all the force is downward at those points.
thats gonna be a swagged out whip
This looks sick!
The Center bar kind of looks like you got inspiration from you haircut 😂 Have fun on Sick Week!!!
If there is every question about turbo-ing a thing. The answer is always YES.
You wear it well !!
& great job
Turbo???? YESS YOU CAN DO IT !!!
I need some part numbers or link to some of these parts and a sketch or drawing with some dimensions hahaha. Watching this video just makes me want one lol
Man I did the exact same thing with the drill but it got me right over my eye! Caught it on video too, Haslip Cycle Works. Love the build.
Yes definitely turbo trike!
I could hang out for life doing this kinda stuff.
That's going to be sick! Can't wait to see it completed.
The crazy guy with eight turbos must turbo the mini three wheeler
This is awesome man, have u ever built anything with electric motors and stuff? I think a 72v boma or vevor motor with a 72v kelly controller would work great on this build!
Love the idea and how you ended up with the dual brace than the high camel bar at first ... Hope there is anyway you can make the seat braced and bit far from the fuel tank
Be honest ATK had to set you straight and got a little ruff lol 👍
Don't forget to plug that hole on the turbo lawnmower
Not the face !that's how you make your money 💰
Hahahaha I wish my looks sold 😂
Yesss! Turbo it! 👍👍
Can you mount that tubing jig on your drill press???
The first frame iteration was perfect size to hang a turbo in and be right at the intake and exhaust.
Hey man we already spoke about building something electric…I promise you this is the perfect candidate.
Omg electric swap after !?!
@@Boostedlifestyle I sent you some videos of my electric build on Instagram…it’s super fun honestly.
I can tune it with a usb to my pc now it’s cool af
You don’t wanna be going a million miles an hour on that thing do you so I’d stick with a 48v system.
But get a high discharge battery and a good controller and send some current through it. It’ll have torque for days.
Screw the lawnmower you can tow the ‘stang 😀😂
FREEDOM FACTORY! I’ll be watching from Germany. Have fun.
This thing is going to be friggin awesome dude
Love this build.... I had a thought for the seat. if you made the seat pan part of that triangle bracing you spoke of joining all the bars together then all you'd need is a rear brace down to the frame above the axle so the load is distributed evenly. Might look rad?? also gotta add some led lights so folks can see you... especially being down so low.
Either way.... I'm sure youre gonna kill it as usual!
Good luck!
Canadian Country Choppers 👍
Verry cool and my notcher had the same issue with going off set so i spaced out the hold down with a few machine washers
I shimmed mine with a 10 thou feeler gauge and it works a bit better now
You could use a motorcycle bobber style seat.. or even a springer seat!
Put a Turbo on it 😅😆👍
What wheels and tire combo did u use
Kyle look up cuppini handlebars, really think that type of handlebars would look cool on the trike🤟
What kind of turbo is on your turbo mower
Badass build man 👍
Looks great from here man!!
you should make a shirt that has a BUNCH of your quotes all over it. "It's all done...after I finish all the welds"
Haahahah I'm.the worst
Tape the selector on your drill before she knocks ya out buddy👀
The name of your channel is boosted lifestyle… Of course you turbo it
Nicely done. On a lighter note 2 hours 2 tubes first time. Hey education cost. Lol
Keep up the good work
Where did you get the front wheel from!?
Looks great
Where did you get the rims and tires?
It won't be very stable in corners, 2 wheels in front and one rear is a much better setup. Will be fun though 🤣
Ok, now you're just showing off. 😁
Kyle, you should use an endmill bit the same diameter as tube that you want to notch in your metal lathe.
When sat on the step stool thing it looked like sissy bar...ol school chopper I could dig that too
Iv built so many minibike. It's s blast. Love it. Go-karts also
Kyle you rock! Love the channel and content! I'm here for the algorithm! Peace
TRACTOR SEAT!!! You need a tractor seat mate!!
Needs holeshot tires 🤘🏿
Should go a springer seat like a hardtail chopper
Yes we turbo it
Esta muy bueno eso disculpe de casulidad tendra las medidas para poder realizarlo muchas gracias
This is cool Julian… but don’t get too behind on the cars! Can’t wait to see the fox tear it up this year
Make sure you put a torque converter on it. I put one on my minibike preditor 212 it was nasty
I personally would suggest moving the position of the rear axle back ~10-12 inches maybe even more just so you aren't sitting on top of the axle.
Put pvc drift sleeves on the rear for an even less safe toy than the mower, that I would also love to have.
Always need a turbo
Maybe use a Oldschool tractor seat for the trike
Can we get a link for the wheels and tires.
You need to drill 8 inch vent holes to relieve gases from building up inside the tubes
No turbo. Play with this for the week, come back and get back to the Mustangs. Spring weather is actually coming faster than we think.
What axle kit and wheels are you using? Are all 3 wheels and tires the same sizes? This thing is sick man!!
New build already.? Damn u getting crazy 😂❤️
this is getting very interesting! I like it
Im still waiting for The Mini Roy!!!! Also use elecrtic tape or duct tape to hold it in gear for the drill it will help lol maybe ill just order a nice dewalt and send it to you.