Mark where bar clamps touch handle bars and rough up the bars where clamps go. Like knarle the bars but can use a angle grinder and put lines in bars back yard style and the clamps will grab onto the grinder lines and will not be looSe feeling
BROOOOOOO!!!!! I need one now lol!! awesome job man seriously... Make another one and write the specs!! Start producing these pit bikes!! everyone is going to want one! Keep up the great work KYLE!!
Coming along nicely - those bearing collars are eccentric tap them round to lock them to shaft then lock the grub screw to stop them coming loose, they wont hold very well with just the grub screw Keep up the good work
Next time, measure and drill the motor holes in longer bars and bolt them back on. Place where you want it and mark and cut the plates. Then bolt the motor back on and tack.
That looks awesome but it brings back a lot of bad memories spent while building the golf cart. Got it all done done it was really cool. Start it up and take for a ride. It went backwards instead of four. The motor was mounted wrong.
Have a look at cars and cameras. Jhon, Ike and Charles are freakin awesome i rekon you would like their shenanigans and they have discount codes for go power sports.
Dude, you cannot skimp out on making a real gas tank for this thing! Think Harley Sportster peanut style tank mounted frisco style on top of the backbone. You don't have to get that fancy with it, but it needs a real tank. Also, possibly look into buying a Honda tank from a 70's bike, like a 125cc one. They made a lot of cool tanks back in the day that might be easy to mount to what you've got here already, I think it would really put it over the top. 👍 Looks great so far! 👏
That little thing is cool as hell man, i bought a harbor freight tig welder 6 months ago and just set it up tonight. My first weld was ok, second was better and the third was near perfect. Went in the house for a sammich then came back out to do some more welding but it went down hill from there lol, the more i tried the worse it got the worse it got the more aggravated i got so i just walked away till tomorrow. Have to get better if im going to build these stainless turbo kit, havent even tried aluminum yet🤦🏻♂️
I think some gussets right behind the head tube spanning that gap between the top and bottom frame rail would not only look good, but also strengthen that area and prevent any distortion from any bumps. Especially with some dimple die action.
Straight pipe,mikuni clone and adapter with a 120 main jet, 100 bucks total and made my go kart on atv tires go 50 on GPS and it was a BIG heavy kart. Governer delete and valve spring upgrade would make it haul ass
I used to work near shipyards, and I met a few welders, Steamfitters are about the top of the field, but the real crazy stuff is deep inside ships, or under the ocean. Can you imagine welding underwater? how crazy is that?
Just in case your axle ends up sliding to one side those locking rings are eccentric and you’re supposed to put a punch on them and drive them in the direction of rotation. That’s what actually locks the axle from moving side to side not so much the set screws
Make your own riser 2" tall well they nut to the bottom on the inside of the tube tube notch the tube and Weld them directly to the handlebars they will be fixed risers
Good work. Suggest mounting the fuel tank that came with the motor like a motorcycle tank. Also have a look at cyclekarts, I think you’d have a lot of fun making one and driving one. Cheers
When you make the engine mounts your going to need slotted holes so you can tighten the chain. Other than that I'm loving it kyle!!! Its cute!! Paint it pink leopard!
Having some tough times lately, Kyle. Sorry I'm 2 days late, but this was just what I needed on a Sunday night. She's looking good, dude... and the chopper is too.😁 Much love to the homies.✌ P.S. Everyone loves this thing,🔥 so maybe do a 250K giveaway? Just a thought.
Sick pit trike Kyle! Inspiring me to build one. I have a neighbor with a rear end from a moped trike I can snatch up. I think a peanut tank from an 883 Harley Davidson Sportster would look sweet on there. Look it up and see if it'll work. I'm sure you could hand make one similar too.
That would look way cooler with the engine mounting plate rotated to mount vertically, with the cylinder pointed up & forward. (valve cover near triple clamp)
Mark where bar clamps touch handle bars and rough up the bars where clamps go. Like knarle the bars but can use a angle grinder and put lines in bars back yard style and the clamps will grab onto the grinder lines and will not be looSe feeling
This trike ROCKS and even cooler is just how stoked and proud you are. You should be!
Concentric locking collar hit it with a punch to twist it and lock it into place then tighten sets screw
BROOOOOOO!!!!! I need one now lol!! awesome job man seriously... Make another one and write the specs!! Start producing these pit bikes!! everyone is going to want one! Keep up the great work KYLE!!
Coming along nicely - those bearing collars are eccentric tap them round to lock them to shaft then lock the grub screw to stop them coming loose, they wont hold very well with just the grub screw
Keep up the good work
I really dig it
welding ain't no biggie!! it's just very hot glue for sticking metal and other metallic type stuff together! 😆
Well done mate. Amazing like always. Quick tech tip. Screw a nut on the bolt before cutting it. Then unscrew the nut. Helps with the threads 👍
I generally don't have a problem because i round it over on the belt sander after
Gotta deflate the rear tires and find thick sturdy pvc pipe n slide it over the rears n pump them up and have the ULTIMATE DRIFT TRIKE!!
Next time, measure and drill the motor holes in longer bars and bolt them back on. Place where you want it and mark and cut the plates. Then bolt the motor back on and tack.
Nr racing, viperizer , dyno cams , and ARC racing for all your small engine needs
You look so happy since you've started full time tubin'!
That looks awesome but it brings back a lot of bad memories spent while building the golf cart. Got it all done done it was really cool. Start it up and take for a ride. It went backwards instead of four. The motor was mounted wrong.
In case it hasn’t been commented the song you quoted is When You Say Nothing at All by Alison Krauss. Great song haha
dude go power sports sells what you need for the intake, exhaust, and tank!
But shipping takes forever 😭
@@Boostedlifestyle check out Red Beards Garage... he is a 212 genius
Canada shipping booooooo. 3 days to Missouri!
Not only takes forever it's an arm and a leg I stead of improvising
Have a look at cars and cameras. Jhon, Ike and Charles are freakin awesome i rekon you would like their shenanigans and they have discount codes for go power sports.
That thing looks sick! Need one of them chopper seats with springs on it!
I’d be stoked springer seat and chopper peanut tank 😉
Dude, you cannot skimp out on making a real gas tank for this thing! Think Harley Sportster peanut style tank mounted frisco style on top of the backbone. You don't have to get that fancy with it, but it needs a real tank. Also, possibly look into buying a Honda tank from a 70's bike, like a 125cc one. They made a lot of cool tanks back in the day that might be easy to mount to what you've got here already, I think it would really put it over the top. 👍 Looks great so far! 👏
That little thing is cool as hell man, i bought a harbor freight tig welder 6 months ago and just set it up tonight. My first weld was ok, second was better and the third was near perfect. Went in the house for a sammich then came back out to do some more welding but it went down hill from there lol, the more i tried the worse it got the worse it got the more aggravated i got so i just walked away till tomorrow. Have to get better if im going to build these stainless turbo kit, havent even tried aluminum yet🤦🏻♂️
I think some gussets right behind the head tube spanning that gap between the top and bottom frame rail would not only look good, but also strengthen that area and prevent any distortion from any bumps. Especially with some dimple die action.
Use your frame for an exhaust coming from the bottom tubing
Big problem with routing exhaust through the frame is that the heat from said exhaust will heat up the whole frame.
@@savage6394 The heat will also weaken the frame significantly. Dynamic flow will also be restricted.
It looks like it’ll be fun as hell to ride around on!
I’m looking at the new Predator 459CC for a big boy mini bike.
Straight pipe,mikuni clone and adapter with a 120 main jet, 100 bucks total and made my go kart on atv tires go 50 on GPS and it was a BIG heavy kart. Governer delete and valve spring upgrade would make it haul ass
Dope AF man! It’s looking so cool!
I used to work near shipyards, and I met a few welders, Steamfitters are about the top of the field, but the real crazy stuff is deep inside ships, or under the ocean. Can you imagine welding underwater? how crazy is that?
You won't be scared of hights on that little beast, love the channel and keep it up mate cheers 👍
Hell yeah, I am LOVING this build.
You could easily persuade a couple inches off that gas tank with a rubber mallet. Wont hold as much gas but easier.
I usually put a divet for set screw on shaft for the bearing retainer/ shafty stoppy thingy
Well done! I love that you did this from scratch! Very kool hope to see it ripping soon!
My crazy Canadian.... Can't wait to your trike at the pit vehicle drag race... In forestburg....
You did a great job on that trike and the welds look really good too, I hope the one I’m building for the smokeout comes out near as nice as yours
Gus it that thing up homie so dah big peeps can pimp that thang around the pits.
#Boostedlifestyle top tip when cutting down a bolt is to put a nut on 1st then after you cut It take the nut off which help re thread the end 👍🏼
The quality of your videos have improved exponentially since you quit your job... Get that V!!!!!
I think I’m going to have to build one after watching you build yours.
Do it! It's not that bad and you could do it with straight pipe
Harley throttle stuff is 1 I ch if you don't want t to weld on 7/8 tube.
Great to see how proud of yourself you are dude and rightly so, it always feels great when you create something from nothing great job man 😃
Just in case your axle ends up sliding to one side those locking rings are eccentric and you’re supposed to put a punch on them and drive them in the direction of rotation. That’s what actually locks the axle from moving side to side not so much the set screws
This was so fun to watch again! love you man ✌
Make your own riser 2" tall well they nut to the bottom on the inside of the tube tube notch the tube and Weld them directly to the handlebars they will be fixed risers
Looking good - love your little 3 wheeler.
Good work. Suggest mounting the fuel tank that came with the motor like a motorcycle tank. Also have a look at cyclekarts, I think you’d have a lot of fun making one and driving one. Cheers
Love it! Makes me want to make my own pit bike! But I'm actually going to make my kids a go-kart first.
Heck yeah dude!! It's such a fun time!
Tammy at Princess Auto, who does warranty exchanges, just voided the warranties on those puppies 😂
Cool build series. Loved following you guys during sic week. Can't wait to see what the spring and summer bring for you!! 👍🙂💯
Those forks might look cool a bit longer if the current set does not work out. Cool build!
"I don't know how I feel about being powerfisted" 😂
When you make the engine mounts your going to need slotted holes so you can tighten the chain. Other than that I'm loving it kyle!!! Its cute!! Paint it pink leopard!
Rear axle has slotted holes for adjustment there.
A chopper peanut tank would set that off mint 😉
Put a cute wicker basket on the front.
I was gonna put something I can put my camera in 😂
Hey bro,just letting you know that the engine is mounted backwards. Point the cylinder forward, keep up the good work
Good to see some Canadians producing awesome videos, first video I’ve seen of yours but definitely subscribing
This would make a sick drift trike
That thing is gonna be frigin nuts with a 212! LOL
As a troll, make a dong tank, with where you sit it'll fit perfectly 🤣 can't wait to see your creativity run wild this year!
A Harley style would look nice
Nice music in the video.
Keep up the good work dude! I like the new style of content. Well done.
glad you decided to prolong your face, i like dat! LUH
Also put a 32 mm mikuni carburator on it with also change the jetti with wheelie bars
Having some tough times lately, Kyle. Sorry I'm 2 days late, but this was just what I needed on a Sunday night. She's looking good, dude... and the chopper is too.😁 Much love to the homies.✌
P.S. Everyone loves this thing,🔥 so maybe do a 250K giveaway? Just a thought.
Ouuuuu! I could build a second one for that reason maybe!?! You're in luck I'll upload another one for you in a bit 😁
@@Boostedlifestyle Right on. Do it, man.
Well done bloke the little build is a credit to you 👍 the thing is going to be awesome little weapon when it's done
It’s cool af but your 8 turbo mustang was something else 😎🤣🤣 love it
bad asssss!!!!!!! i love how low it sits!!!
You know the street value of that snow....
Better Off Dead?
Super rad low rider mini trike
build the tank from a fire extinguisher !
You should make a motorized cruiser bike you got skills bro! 🤠
This one's looking great! Can't wait to see the next episode 👍🏼
Now THAT is cool! 😎
Finagling, the act of figuring the angle of the dangle.
Very cool dude... Seems a little low... But we'll see how it works out... 👏👏👏
I think it needs footprint gas pedals for the footrest’s!
That live rear axle is gonna' make turning a bit if a challenge. You might wanna' keep yer eye out for a small riding mower diff.
Kyle and Gina y'all rock! Love the channel and content! I'm here for the algorithm! Peace easy and get that v!
Congrats on a job well done 👍🏻
Pretty cool
Your a mad mulleted bloke mate enjoy watchin your videos , yas need to build another to race them 😂
Awesome build!!!
Great idea… hmm pit bike races in the future 🤔
Very cool, looking forward to the next build!
if you want too go offroad your gonna need bigger round nobbly tyres to give it more clearance,i think,but it is wellcool!
@Boosted Lifestyle Hand controls are available in a variety of sizes
Please make the seat look like pizza slice ❤️🤣
That thing is cool!
Rake the foot pegs forward and up for drift stability
Sick pit trike Kyle! Inspiring me to build one. I have a neighbor with a rear end from a moped trike I can snatch up. I think a peanut tank from an 883 Harley Davidson Sportster would look sweet on there. Look it up and see if it'll work. I'm sure you could hand make one similar too.
Several manufacturers used one inch handlebars and controls
Harley aftermarket parts will have the same risers you have now but for 1 inch bars
good looking welds and i like the build!!!!
Mario kart go-cart next
That would look way cooler with the engine mounting plate rotated to mount vertically, with the cylinder pointed up & forward. (valve cover near triple clamp)
You should use the second engine to build Tokyo his own bigger version of the pit bike
And I'm wearing my Boosted Lifestyle shirt... what are the odds.?!🤷♂️
New best friends !
@@Boostedlifestyle 🧑🤝🧑
Love this build!!! So freakin’ cool!!
I’d buy one 😂🤘🏻
Excelente amigo felicidades... Si me puede compartir los planos, está hermoso!!
Use an old fire extinguisher as a gas tank
I ove your vids .Keep em coming.Lovethe trike.Camt wait til its done.
Thanks 😁 make sure to share!
Need to put a steel tractor seat on it use and a fire extinguisher for fuel tank
Looks sick Kyle! Makes me want to build a pit bike now!