DIY mini bike pt 2 (bending the frame)

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ • 109

  • @speedrover
    @speedrover Рік тому +1

    Nice work!!! Any full suspension builds??!!

  • @noorbabelli
    @noorbabelli Рік тому +1

    Kindly question about the wheels how we can get it for international order? I couldn't find in internet 😪

  • @dekaromcneil6333
    @dekaromcneil6333 2 роки тому +2

    I would like to buy 1 of your frames how can we make that possible

  • @MountainEagle77
    @MountainEagle77 4 місяці тому +1

    This is awesome! I’ve been looking for a mini bike build like this from scratch!

  • @waynepearson7058
    @waynepearson7058 Рік тому +1

    Awesome pipe bender

  • @LNRRidez
    @LNRRidez 3 роки тому +9

    This video was awesome! I've been wanting one of the JD2 benders for awhile now. I'm actually building a mini bike trike but am using 1" square tubing for it! I can't wait to see how this turns out in the end. Keep the videos coming and I'll keep supporting and watching them!

  • @Josevargas-sb2ds
    @Josevargas-sb2ds 7 місяців тому +1

    What 1" CLR bending die are you using or prefer?

  • @kungfuclutch2788
    @kungfuclutch2788 6 місяців тому +1

    What's with the bike helmet on all the time ?

  • @ironsandhammers359
    @ironsandhammers359 Рік тому +1

    Tbanks for the video. Im looking to make cuatom bikes as a side hobby after my first build was so fun. Great work🙌🙏

  • @steventwiddy3402
    @steventwiddy3402 Рік тому +2

    Ok great video but why are you wearing riding gear while you’re building it ?

    • @megoingfast
      @megoingfast  11 місяців тому +1

      Eye protection... but also to hide my face of which at the time I worked corporate world. You ever seen someone climb the corporate ladder while also being a goofy mini bike rider in their spare time? Free speech ain't free, sadly. Can't keep personal and business separate any more. Ditched the 25 year long career and the helmet in the latest videos. ;)

    • @steventwiddy3402
      @steventwiddy3402 11 місяців тому +1

      @@megoingfast I completely understand, lots of backstabbing sorry ass people in the corporate world , I was a territory manager for Nabisco for 18 years and they restructured and I lost my job but now I’m a sheet metal artisan on military aircraft and I love it to finish out my working career

  • @RyanOfTheSouth
    @RyanOfTheSouth Рік тому +1

    This was a very informative video! Any chance you could make a video showing how to make a trike from like the big she trike Mini Bike Kartel builds? Or explain the changes you would need to this frame to build it into a trike like theirs?

  • @archi.001
    @archi.001 Рік тому +1

    Good afternoon. I will be glad if you help me. I really want a bt200x mini bike, but there are none in my region. I'm ready to do it myself. tell me please, do you have a drawing of the frame, AutoCAD?

    • @megoingfast
      @megoingfast  Рік тому

      Not the frame, the dimensions and angle measures are given in the video series. On the website, there are downloads on the bottom of the page in .dxf for cad use for the metal plates if CNC mill or plasma are available: megoingfast.com/custom-homemade-mini-bike-build-plans/

    • @archi.001
      @archi.001 Рік тому

      Thank you. Your experience will be useful to me

  • @Kevin_747
    @Kevin_747 3 роки тому +6

    Nice work. Figuring out the rolled radius into the tight bends takes some work. I've had my JD2 bender since 1988, before they were called JD2. My 1" and 1.250 dies are the ones I've used the most. Has to be miserable working incognito with the full face helmet. New subscriber here.

  • @bonnevillegarage
    @bonnevillegarage 3 роки тому +4

    great build guide. I always tell my students to have the seam line up when we use the tubing bender to help with bends and compound bends. Thank you

    • @GratefulEd907
      @GratefulEd907 3 роки тому +1

      You should make your students build these. I’d sign up for a class like that if it was available in my area.

    • @bonnevillegarage
      @bonnevillegarage 3 роки тому +1

      @@GratefulEd907 we do. It an after school projects so that kids outside of my auto class can join in.
      Ever year we try to build 4 drift trikes 4 min bikes and 1 cyclekart

    • @GratefulEd907
      @GratefulEd907 3 роки тому +1

      @@bonnevillegarage that’s awesome what do you do with the builds?

    • @bonnevillegarage
      @bonnevillegarage 3 роки тому

      @@GratefulEd907 scrap the metal each year, and reuse all the main parts.

  • @miketripletfab4098
    @miketripletfab4098 Рік тому +1

    Did you use one of the dies that came with the harbor freight roller or did you get a 1” roller die for it.

  • @michaelosullivan4112
    @michaelosullivan4112 2 роки тому +1

    Should try do some on trikes be looking awesome fun next adventure for trails ridings

  • @Tampaboys
    @Tampaboys 3 роки тому +4

    Great job buddy how much would it cost me to get one of these frames off you bud

  • @sarpergurbuz6318
    @sarpergurbuz6318 3 роки тому +2

    Can you please tell the wall thickness and diameter of the pipes? I would be really happy if you can.

  • @edgarsanchez8537
    @edgarsanchez8537 2 роки тому +1

    Did u know where can i found bushings fo the fork frame to hold to the bike frame

  • @j8k3th3gr8
    @j8k3th3gr8 4 місяці тому

    I have a question- can you use a manual bender to bend these frames? I'm just asking bc I don't have the $ to invest into a hydraulic bender at the moment but I want to start doing some custom builds. I've been modifying existing minibikes but I want to take it to the next level. Appreciate your videos- let me know what you think if you have a chance.

  • @bigmacmillerlite8775
    @bigmacmillerlite8775 2 роки тому +1

    What kind of tubing is this? It is kind of muffled in the video. Thanks!

  • @azrieldelacruz9379
    @azrieldelacruz9379 Рік тому +1

    Do you have plans?

  • @israelalcantar8765
    @israelalcantar8765 2 роки тому +1

    At where can buy on of this

  • @TacoStand500
    @TacoStand500 3 роки тому +2

    Awesome start for a mini bike build for a custom mini bike frame! Very helpful!

  • @pullstartpatriot
    @pullstartpatriot Рік тому +1

    do you happen to know neck tubing size and thickness? and bronze bushing size?

  • @AshleyPalekotama
    @AshleyPalekotama 4 місяці тому

    Very well done mate great work keep it up

  • @cybermavrik
    @cybermavrik 3 роки тому +1

    SAFETY FIRST !
    Good work bruh !!

  • @samsgarage1716
    @samsgarage1716 2 роки тому +1

    Great job.I really want to get a pipe bender so I can make cool mini bikes like that.

  • @mrjoshua2791
    @mrjoshua2791 3 роки тому +1

    This dude is awesome. I think he's a character from one of the early seasons of south park.

    • @megoingfast
      @megoingfast  3 роки тому

      Kenny.

    • @mrjoshua2791
      @mrjoshua2791 3 роки тому

      😆

    • @trevinskiking2165
      @trevinskiking2165 3 роки тому +1

      @@mrjoshua2791 I go back to the ORIGINAL Minibikes of the 1960's & 70's & the hot engine to run was a McCulloch MC10 ? 10 HP 2 stroke with a Karting cast alloy header & I'm down under in New Zealand Cheers for leaving the comments switched on, you fella's in the states have now got it easy ! Trev

    • @mrjoshua2791
      @mrjoshua2791 3 роки тому +1

      Ya i just recently pick up an old tote goat frame . I'm giving it a going over and having to tweak a few things putting in a predator . Back in the early 80s I got to ride my grandfather's on his farm so this one's near and dear to my heart. Cheers my friends.

  • @FishingGuns
    @FishingGuns 3 роки тому +5

    Pretty cool seeing how to use a frame bender and tubing roller to make a homemade mini bike!

  • @markgonzalez4070
    @markgonzalez4070 3 роки тому +3

    Awesome channel!! Great build and very helpful!! Do you sale the frames?

    • @megoingfast
      @megoingfast  3 роки тому

      No, but I will be getting more information online for area builders with the up and coming videos in the series.

    • @trevinskiking2165
      @trevinskiking2165 3 роки тому

      @@megoingfast Captive Audience=Captive Market....it worked for Hughe Heffner of Playboy Fame.But do you have more of a vested interest down the track ..(no puny pun or offence intended ) Trev New Zealand 🙃

    • @trevinskiking2165
      @trevinskiking2165 3 роки тому

      Who cencored or removed the "Like' within the last hour after a like notification came into MY inbox ? Now it's removed within the hour...we play FAIR cricket down here in NZ ,we don't get an advantage by the rulebook whatever.T NZ home of the world's fastest old Indian and the home of Indy Daytona Champ etc Scott Dickson !.

  • @themechanicman3865
    @themechanicman3865 2 роки тому +1

    did you add that hydraulic cylinder to it or did it come with that cuz I've looked at a few of these and they don't come with that hydraulic cylinder that looks like a high Harbor Freight cylinder

    • @megoingfast
      @megoingfast  2 роки тому

      "S.w.a.g. off road" kit to add it.

  • @mozzde4675
    @mozzde4675 3 місяці тому

    Could I use conduit steel pipes

  • @Pilotforlife555
    @Pilotforlife555 3 місяці тому

    I’d love to get some actual drawings for the frame sides

  • @samkaplitz9036
    @samkaplitz9036 Рік тому +1

    Pretty cool!

  • @andyp6351
    @andyp6351 2 роки тому +1

    Did you order special bearings for the pit bike front fork stem? Most of the small pit bike front forks that I have found, have a 22 mm steam, but with ~47mm od on the bearing cups

  • @DavesCoolCustomBikes
    @DavesCoolCustomBikes 2 роки тому +1

    What die are you using to get your curves I’ve got a bunch of them but I can never seem to get my curves that tight maybe I need a new die

    • @megoingfast
      @megoingfast  2 роки тому

      1"*3" for the jd2 bender. Model 32 Die Set - 1" Round Tube (1" OD) - 3" CLR - 180DEG: www.jd2.com/model-32-die-set-1-round-tube-1-od

  • @mathewshackelford8037
    @mathewshackelford8037 2 роки тому +3

    Solid video, new subscriber.
    Also, you can just use the WD-40 as a rust prevention.
    Two thumbs up man!

  • @Hollywood4Fun
    @Hollywood4Fun 7 місяців тому +2

    Tubing costs around here are too expensive to play around.

  • @goldyfourtyfourty
    @goldyfourtyfourty 3 роки тому +2

    Hi, do u mind to share your frame dimension?

  • @TheKenbotin
    @TheKenbotin 2 роки тому +1

    Great job I hope you can notice my comment I hope u can weild a body frame for pocket bike that can fit the 43cc 47cc 49cc engine hope u can make a video doing pocket bike

  • @fatbuddycat
    @fatbuddycat 3 роки тому +1

    Nice work brother!

  • @skylark4901
    @skylark4901 3 роки тому +1

    What brand name tubing roller do you have there? Thanks, Merry Christmas!

  • @JolicoeurAbear
    @JolicoeurAbear 3 роки тому +1

    sorry for another question, why did you change to the second bender after the first roll? will the harbor freight roller not do every bend?

    • @megoingfast
      @megoingfast  3 роки тому +1

      There is a roller and a bender. Roller will not be a specific degree radius, a bender will be. The rollwer cannot do the 130+ degree bends needed.

  • @druface12345
    @druface12345 3 роки тому +1

    Make a frame for big tires next with a rear swing arm for extreme off-roading.

  • @JolicoeurAbear
    @JolicoeurAbear 3 роки тому +1

    I can't find 90 inch, would it work to weld 2 or three lengths end to end?

    • @megoingfast
      @megoingfast  3 роки тому +1

      It won't bend true, and without a sleeve in the weld won't fit in the bender unless you grind it down and sacrifice weld strength and support. So, overall, not the best.

    • @JolicoeurAbear
      @JolicoeurAbear 3 роки тому +1

      @@megoingfast thanks, I will keep looking for a longer one.

  • @briantruck2284
    @briantruck2284 2 роки тому +1

    wish I had a pipe bender

  • @williamaddison5923
    @williamaddison5923 2 роки тому +1

    What material do you use for the steering stem?

  • @jg1746
    @jg1746 3 роки тому +1

    I have a v-twin and opposed twin Briggs and Stratton engine, do you think if I followed your build to the T, these engines will fit?

    • @megoingfast
      @megoingfast  3 роки тому

      Don't know. Don't have the engine to check. The 440cc 18 HP that's on there will be putting out over 21-22 when I'm done with only minor performance mods and have room enough for the stock gas tank. Only cost $350 with tax.

    • @trevinskiking2165
      @trevinskiking2165 3 роки тому

      @@megoingfast Don't Support China ,you may as well used a used good condition Trailbike engine if your chasing that sort that sort of horsepower, you can get low cost Honda dual range CT90cc 4 Strokes for a song with a lighting coil & reliability if your on a budget & upto a 250cc if you want to scare youselves

    • @trevinskiking2165
      @trevinskiking2165 3 роки тому

      Damn autocomplete: minimum of 5 speeds & similar weight as the engines your playing with or prefer, not everyone lives in the states with it's cheap prices.No offence.Then builders could tailor the power output to suit their riding abilities.Just an alternative powerplant thought with non Chinese reliability buy local & keep someone in your own Country Fed.Cheers, Trev New Zealand 🙃🤗

  • @anthonyreddy2834
    @anthonyreddy2834 Рік тому +1

    I personally use brake or carb cleaner because wd40 leaves an oily residue.

  • @joshuagerlach6943
    @joshuagerlach6943 3 роки тому +2

    I ride a 70s Cat Duster Chopper Almost every day the weather is good just beyond the edge of the paradise campfire. 212 governors removed, velocity stack , foam filter, jet , springs, 4 feet of 3/4 galvanized homemade header pipe, Honda thumb throttle, Suzuki foot pegs, I’ve had it for years
    She’s eaten many engines I used to go long distance rides with a hot rodded
    brigs & Stratton 8hp l head 14 tooth sprocket straight on its shaft no clutch
    I’m sure someone know how rad of a ride that would be. I’m 30 years old & just ordered a bt 200 x , predator 212 & a torque converter... I don’t even have a car
    These mini bikes are my daily drivers .

    • @megoingfast
      @megoingfast  3 роки тому +1

      Nice 😎😎 that BT is very versatile and a brute!

    • @willylickit8694
      @willylickit8694 Рік тому

      I had a cat duster chopper

  • @standeyoe7468
    @standeyoe7468 3 роки тому +1

    great video. what size and wall thickness of DOM tubing are you using ? Are you buying that on line or close to home ? keep those videos coming.

    • @megoingfast
      @megoingfast  3 роки тому +2

      16:35 and online from a place close to home

  • @jex8046
    @jex8046 3 роки тому +1

    Deserves way more views. Hope you can make seperate videos about your tools and or mods

    • @megoingfast
      @megoingfast  3 роки тому

      part 3-5 starts covering more details - filming part 3 the past couple days but this is a very large project with many parts for many builds

  • @Turbski1
    @Turbski1 Рік тому +2

    Can you make me a micro fame?

    • @megoingfast
      @megoingfast  11 місяців тому

      I have a build of one. Never did launch the video, though. They are pretty easy to build.

    • @Turbski1
      @Turbski1 11 місяців тому +1

      @@megoingfast i ended up building up a rcf micro mini

    • @megoingfast
      @megoingfast  11 місяців тому

      @@Turbski1 Those are nice! Evans got some great builds for sure!

  • @michelevitarelli
    @michelevitarelli 3 роки тому +1

    Great video. Thanks for sharing.

  • @MrSlickPulla
    @MrSlickPulla 3 роки тому +1

    Man this is so awesome thanks bro

    • @megoingfast
      @megoingfast  3 роки тому +1

      No thank YOU! Took months to get it all together and it's still in filming! Compliment is appreciate! 👍😎

  • @rickyislas1390
    @rickyislas1390 3 роки тому +1

    Do you make frames for customers. Can i order one.

    • @megoingfast
      @megoingfast  3 роки тому

      I never will for public sale. Unrealistic expectations on cost, liability, etc. I build stuff for a few very special high roller locals.

  • @LNRRidez
    @LNRRidez 3 роки тому +1

    Do you have any links to those forks?

    • @megoingfast
      @megoingfast  3 роки тому +1

      The are I believe 4-5 different sets I've got laying around. 2 are Amazon. 1 was studz. 1 was off a RB100 after I switched forks, and one was home made.

  • @nicholasventura4107
    @nicholasventura4107 2 роки тому +1

    Do you sell frame

  • @thebrokeway9838
    @thebrokeway9838 Рік тому +1

    homeboy got that gangsta lean..when you know wtf you talkin about!!

  • @jarpen3
    @jarpen3 2 роки тому +1

    Open production super 73 make good bissnes, 👍

  • @Bikelifechalie
    @Bikelifechalie 3 роки тому +1

    prices?

    • @megoingfast
      @megoingfast  3 роки тому

      ALL THE MONIES! (I'm setting up a different plasma cutter, still not able to do production runs yet but hoping to go somewhere with this soon. Can contact a local build to see if they'll make you one. Plans are out there!

  • @GratefulEd907
    @GratefulEd907 3 роки тому +1

    Looks like there’s a demand for these I like the looks you should take some preorders and hire some help if ya need to just quit your day job and build us some mini bike frames

  • @bacon2589
    @bacon2589 3 роки тому +1

    Lemme buy one

    • @megoingfast
      @megoingfast  3 роки тому

      If you find someone who can build it in the area. I'm sure someone can build you one but I'm not setup for mass production. Barely have enough room to move around in the garage.

  • @chrisskatehii5121
    @chrisskatehii5121 2 роки тому +1

    takin off oil with oil. got it

  • @stevie9361
    @stevie9361 3 роки тому +1

    Make one out of aluminum an send to me an ill tig weld it. I'll charge a frame for me

  • @aftermathwhite4955
    @aftermathwhite4955 Рік тому +1

    Why in the hell do you have on a helmet LOL

  • @RAWRMotorsports
    @RAWRMotorsports 3 роки тому +1

    😱💥🔥👍✌🤘😎

  • @SpACeCruizeR2o3
    @SpACeCruizeR2o3 3 роки тому +2

    HoW muCh i JUst DoNt hAve thE tooLs foR thiS bUt i Def WAnt A frAme A.S.A.Pp

    • @megoingfast
      @megoingfast  3 роки тому +3

      DiD yOu JUst caLl mE a SAp?!

    • @SpACeCruizeR2o3
      @SpACeCruizeR2o3 3 роки тому +1

      @@megoingfast lol

    • @SpACeCruizeR2o3
      @SpACeCruizeR2o3 3 роки тому +1

      @@megoingfast a.s.a.p as soon as possible lol who calls people sap anymore lol