Here's 3 FREE MODS to make your Ram 1500 FASTER at the dragstrip!!
Вставка
- Опубліковано 2 жов 2024
- Incredible Hemi Merchandise:
teespring.com/...
PLEASE SUBSCRIBE IF YOU WANT THE BEST RAM CONTENT ON UA-cam!!!
Follow me on Instagram @Incredible_Hemi_
Hit up Guage Performance for all your Hemi needs:
www.gaugeperfo...
ELITE HEMI PERFORMANCE
Elitehemiperformance@gmail.com
Subscribe to StangMode:
/ @stangmode
Hit up Greene Racing for the BEST tuning:
/ greeneracing.tuning
Cameras used:
Samsung Galaxy s10
GoPro Hero7 Silver
DO NOT DRIVE WITH NO AIRFILTER. 75 bucks K/N lifetime cleanable very breathable upgrade air filter. Makes a difference!
At LEAST run cheesecloth and wire mesh (track day only) .. This has been done for decades safely as long as you are covering no larger than a 5" hole.
How times have changed it’s 300+ now
With a 300 pound man ... “remove the 300 pound man”
Lol. Reminds me of I story once read....an old race driver told his guys he needed 50 pounds taken out of the car. He weighed north of 300 pounds and one of his mechanics told him to lose 50 pounds.
Hahaha
🤣i feel attacked
Lol
#4 Mod to loose another 120 pounds weight, don't go to the track with a full tank of fuel. In fact on takeoff that liquid is thrown/sloshed to the rear causing a slight pull. I run a 1/8 tank and bring cans.
The general rule is 100lbs = around 1/10th of a second in the 1/4mile
You’d get much colder air by putting that cone filter into that box these things are engineered to get colder air from stock doing that with the air intake youre just getting a lot more engine bay hot air opposed to putting the cone filter inside of that box and sucking in the air from behind your headlight outside the engine bay.
So take out your air filter to fuck up your engine, take your truck apart to make it ugly as fuck, take your fan off to overheat and melt those aluminum heads. This guy....
Completely removing the filter actually hurts the performance. It’s letting too much air and messes the fuel/air ratio. You lose a couple horsepower. Dyno proven
Do not under any circumstances take your filter out . !!! SMH ……
this just smells like Jersey..... add tow mirrors, that'll give you another 30 HP 🤣🤣🤣🤣
You should see the triple blade wipers in NY, 65HP easy
That literally made me laugh out loud. Yes I lived in NJ so it makes it even funnier
I left my air box in, K&N filter. I took the air box snorkel and rotated it down 90°. Pulls in more air than through the fender. Keeping it stock, Ram 1500 crew cab, Outdoorsman. Installed BBK Headers, and Flowmaster Outlaw stainless exhaust kit. I Don't run it down the track, my daily driver, but I work with drag racers. Seems like they are rubbing off on me. Lol.
To get really fast times at the track remove Hood, doors, bed, cab, bumbers, all glass remove the driver set just use a bucket.
Oh yeah....destroy a truck while you at it
@@robertzajkowski9570 if you ain't first you're last
Don't forget to add a skinny driver...😁
Yea and he can go on a diet to 😂😂
To each his own! Exactly! I've gone, and still going nuts on a 2015 Durango RT. It weights more than the rams! Gonna try the intake trick next time I go to the track. Trying to hit the 12s naturally aspirated near sea level. Gotta do quite a bit more to hit it here in Vegas.
3:41 it would be better if yall just get a hi flow air filter. Cheaper than a cold air intake and you can hot rod it in town without worrying about your intake sucking in dirt and stuff
Drag running a stock automatic MOPAR is RISKY LOL
Agree removing the clutch fan is definitely noticeable easily 10-15 hp. Not huge but anything helps. I did the V6 direct plug and play with 180 stat looks like factory. My Ram Rt is running cool and also mpg's go up with clutch fan delete.
Yea im getting mpgs than I was stock also
man that sounds good !!! I imagine what it sounds like in person !!!
Thanx man it sounds 10x better in person imo
If WD-40 an adjustable pipe wrench & a 1/2" LONG Johnson bar are the special tools you referring to? It'll take 20 minutes at the most! The biggest issue was when all of the meatheads we're
Getting confused as to which way the fan clutch turns which would be dependent on which generation of RAM truck the fan clutch is being removed from? My truck is the fourth generatio😊 on the driver side of my quarter fender I used my half inch Johnson bar to hold the tensioner in place while I rotated, the clutch fan bolt counterclockwise in order to remove the 15 pound clutch fan. I to didn't see it necessary to install the V6 electric fan being that the natural convection process of hot liquid, naturally moving to the top of the engine with the cooler water doing the opposite. I also installed the 180 thermostat at the same time. up to this point I've had no issues whatsoever due to my AC electric fan, moving enough cool air pass the radiator.
Stupid mods,,The filter is there for a reason,, to keep Dust and dirt out of the motor,,also anything that might be on the track,,,,Here is a better idea,,Don't run over 5 gallons of fuel,, and refill after each run
Taking the tailgate off will cost you drag. It alters the aerodynamics and not for the better.
This was proved on myth busters years ago ur right
Take the tailgate off and use it to make a mold to make a fiberglass shell and fill it with expanding foam. I'm fiberglassing the fenders, hood, replacing rear bumper with roll pan, add bed cover, and battery relocation to bed. I don't hit the strip but I like to troll.
start a diet also help :)))
Why u checking out a guy If your gay just say that
Don't ever EVER drive without your air filter. You won't know the damage for 80,000 miles, but it starts right then and there. Sucking crap into the intake is a stupid idea of a mod
REALLY!? Is this a joke or what? best way to fuck up your hemi, good job dude... Wow I'm amazed.
Best way to fuck up a hemi is leaving it on idle lol
Make sure you get a light weight driver or better off just make it rc!!
You should get a sport hood for you truck and a pair of smoked projector headlamps and your truck will look much cooler ! Just my opinion !
That cam sounds wonderful
I tuned out soon as he said well this should only be used to track and back, all that dirt gets in. Sorry, not customizing anything that would hurt a $5000+ engine (I'm guessing on the $5k) . If it doesn't do much why do it anyhow, I can see if it were an instant 75HP... I'm not buying it, he shouldn't be selling it....
Brother, in your opinion who is the best custom tuner? I have a Diablo I3 Platinum tuner. I own a 2007 ram 1500 SLT 4x4 4 door with (used to be) a 5.7l. I have bored and stroked it to 397ci with molnar 4.080 crank, 6.125 I-beam rods, and CP Eagle pistons (9.6cc dish) and installed an Inertia cam (I have cam specs). MDS delete, Eagle heads, and will be installing the 6.4L intake manifold and some sort of CAI. I have 392 injectors, pacesetter long tube headers, no cats, and a pacesetter 3" Y pipe. Tranny is the 545rfe with a Transgo valve body and Sonnax RFE-LB1 line pressure booster. I would like to adjust shift points, MDS delete from the ECM, raise speed and rev limiters, and adjust for tire size (35x12.50x18). Can you suggest a custom tuner? Is it better to find a local dyno shop and have them tune it? I'm in the Dallas area. Thanks!
Does it have a stall and anything done to trans? Thinking about cam package from TSP but I heard greene where it’s at.
#4 show up to dragstrip with 4 gallons fuel in the tank. Bring full 5 gal can to get to gas station after. Roughly 8 lb per gallon of fuel for each gallon not put in.
Hi, I have an older dodge ram 1500 quad cab. Its not a hemi, unfortunately, Its a 2003, but wanna make it run faster, better , stronger. Wh as t do you suggest ifvyou have a minute, and I am on disability, so can only do so much per month.
Sorry to say this......but if your funds are limited, id suggest You spend your money on bettervthings than making Your truck faster, and less gas efficient.
You could make your runs with low fuel just enough to get down the track
LklCW ?cp1f z 0
Did you just say take my interior out to make my truck faster....lol...That's
Definitely not three simple mods...... So my family's gonna ride in the bed...loool...... I don't think you should do videos anymore......Definitely save some drugs for your friends....lol
lol do NOT listen to this advice lol. Unless you don’t like your truck. I do agree with trading the stock fan with an electric V6 fan. Removing air filter is an absolutely horrible idea, even if you’re at the dragstrip lol.
100 lb off the weight of the vehicle gets you a 10th at the drag strip,..?
Put a skinny driver in the truck and you've got an 11 second truck right now! 😂😎👍
Can you please send sounds of this truck to my email? God I love this thing!
I'll get u some I've just been really busy with work n family
JUST get a race car.... Like a muscle car or something... Doesn't make sense racing a pick up truck, they weren't built for that... Race it off road on terrain etc if you really want to compete it
Too much my truck, my truck, my truck. Just get to it dude. Weight, air filter and clutch fans are not revolutionary brother.
I think the best realistic and cheap mod you have is the long tube headers... So jealous as my cast iron manifolds already have a broken stud with only 72000km (45000 miles)
If u get a tune with long tubes you will gain some serious power
It always makes sense to increase power by sucking hot air from under the hood versus from inside the front fender for daily driving right?
Lol when i saw the tittle i said to myself "hes gonna tell people to take out the air filter". And yeah it helps. I did that to my mitsubishi l200 when i was 18 waaaay back in 1997 .. luckily didnt bork my engine i drove like that for a year
Remove the air filter and possibly suck something in your motor 👎for a few horsepower and then cost you mega 🤑🤑🤑🤑
You’re talking about removing shit you need for literally no gains. Removing air filter won’t make more than like a 3 hp gain. Removing a couple seats won’t do hardly anything in weight change and removing clutch fan doesn’t help at all. It weighs almost nothing and keeps your motor running cooler which causes it to run better. You want power gains lower the truck, get a bigger alternator, turbo it, dyno tune it, cam and bore the engine.
Everything I named will gain you about half a second off your 1/4 mile time at the drag strip. How do I know? Because I raced and tested it multiple times so 🤷 🤦♂️
I have no idea how some people buy trucks then do track !! They are not built to be like that. Get one race car then do your dreams
Remove air filter then remove clutch fan then sue this idiot for making you blow your engine up.
I take off all the body panels and smash all my windows before going to the track who f****** needs them
All car guys we know this stuff that's why cars get gutted out. Didn't see no underground shit for trucks
Maybe you can explain it to me but I’ve tried to go to the link to buy your merchandise and it takes me to what looks like a bunch of female shit. If there is a direct link to the hemi merchandise, especially the ram Hoodies and T-shirts, I’m interested
Sorry about that , I'm having issues with my Merchandise link I will try to fix asap
Y’all seen all that dirt on that air filter? Do this shit if you want to and all that dirt will be inside your motor.
Did you or do you have the hemi tick?
I stopped watching as soon as he told us to take the filter out. That’s not a mod, that’s stupidity
Need to lose some weight yourself, get a standard cab short bed and some lighter wheels and tires to get rolling.
Sounds stupid to me maybe if i cut my prick in half ill go faster at the strip thats a few pounds
Any of the shirts and sweaters in woman? And other coolers?
I bought a spectre c.a.i kit and it silenced my exhaust.. immediately hated it.
ur gonna wanna take them fog lights out to keep more airflow on ur engine. at least when driving around
U take your tail gate off with not spoiler or tailgate your traction will be worse in back no down force
V6 fan, shutter delete, 180 thermostat, and a tune.... If you do the 180 thermostat on the newer truck you need to do the shutter delete! Otherwise its pointless...
Its not pointless keeps temps lower
@@IncredibleHemi1111 what I mean is if your truck has the shutter infront of the radiator and you attempt to lower the temps with a thermostat its pointless the shutter affects airflow..... You need to do the shutter delete to take full advantage and ensure you get maximum cooling
Maybe you should hit the track. Out of breath from talking
First ruke of thumb dont take advice from a guy that says take the thing of the thing
Yes there are after market electric fans . They dont take long to install. Yes aprox 8-11ish hp extra
This ain’t to mod, it’s a stolen truck 🤣🤣🤣🤣
Wrong place..thought it said Trucks..
Why would you take the stock cold air off and install a hot air intake. Haha
This video should be titled “how to get better gas mileage by ruining a truck and living in the past “. Or “pretending to be something I’m not”
lighter wheels and tires will do better because it's unsprung wt.
Send me the sound of this truck also to my email it’s awesome
🤣😂🤣🤣🤦🏻♂️ NO THANKS BUDDY
Wassup bro, just subscribed to the channel cause I’m from jersey too. So you or anyone else from jersey have any tips on upgrading my truck or want to help me work on it let me know and hit me on Instagram @different_js
*btw I have a 04 Durango 4.7 Mag*
Are get the tool at advance .it called fan clutch tool
Does this work for a 2011 ram? Plz let me know
Does a 1994 Chevy k1500 Silverado z71 have a cabin filter
No. Mine didnt to old.
Hey you only do work for ur self because I need some help
I just got a 2019 RAM 1500 Lonestar. Can someone give me a list of what parts/kits I need to up the horsepower. Not a drag truck, just a fast ass highway truck. I’m thinking supercharger, K&N cold air induction kit, flomaster exhaust/high performance CATS, super chip…anyone know of a list with the recommended choices for these things or alternative mods?
How do you disable the rev limiter ?
blah blah loves to hear his own voice. wont get on with it
Get after fan. The higher the rpms the faster it spins and bends to create less drag requiring lass power from the engine
seems like too much just to race a truck
When I was a police officer (retired 10+ years ago), I had a partner who would remove the air filter from our crown vic and toss it in the trunk at the beginning of the shift... Though he always put it back on just before off duty roll call... I gave him so much 💩 for it, too.
I'm wearing headphones and my teeth are rattling. That's doin it justice......LOL.
Nothing like the sound of a Hemi booting up.....whenever and wherever.
The first Hemi I worked on was in a 57 New Yorker convertible with a 392 Hemi (factory).
That was a heavy beast but that Hemi made it haul. 16's stock and 13's with the super charger.
Funny as hell watching the old 392 in a big car keep pace with the stock 340 Swingers turning mid to high 13's.
All the stuff your tearing off the vehicle I have a 2008 Dodge ram 3500 with the cummins in it and I was having problems cause I need to get my heater core fixed so I took the thermostat out engine runs a lot cooler
Why not just do cold air intake?
How did you lower the rear 2 inches?
Reverse the rear springs and add rubber spacers
OR just be a real man and buy a Cummins!!!
Nice Video I Have a 2014 Ram 1500 Larmey fully loaded I have Trinity T1000 and K&N air intake do you know someone that can send me a custom tune for my setup?
Doesn’t look like you have your maf sensor hooked up to your engine! Looks like it’s on the floor board of your rear seat! Lol
WTF! SICK RIDE BRO. THAT SOUND IS BALLS.
I GOT AN '05 BIG HORN (WERE BOTH GETTIN OLD). K/N FILTER. IVE BEEN THINKING ABOUT LOSING THE BACK SEATS & PUTTING SUBS. NEVER EVEN CONSIDERED THE WEIGHT BUT YOURE ABSOLUTELY RIGHT. GOOD LUCK ON THE STRIP!
Thumbs up just for the cold start!
Thanx man
Got a 2006 lift, love it. Giving it to my son. He’s 12 and getting a Cummings.
DODGE the bf RAM his gf
that truck is just fu***ng sick....i love that badass truck.
Thanx boss
That cluth fan has an electric fan with it.
Good vid bro! I really like these they are great for intro racers
Thanx man i do what I can to help others and try to get the best content for you guys
@@IncredibleHemi1111 your doin great bro keep it up 💪🍻 my Durango is almost finished
Nice bro
@@IncredibleHemi1111 I'm excited as all get out! Lol
If your gonna go that far id cut the frame for a tubular chassis in the rear with a custom rear end. Nothing like loosing 2k lbs.
Just remove the bed lol
plumb in some nos. cheap mod
What suspension ??? You have
Looks like a hot air intake to me
a few more free mods if you are really trying to break records. drain 2 quarts of oil out, remove rear brakes and rotors and plug the lines, remove serpentine belt (for the pass only), remove sway bars and front shocks, remove entire exhaust system, remove fan like you said and as long as you have a 180 thermostat with or without tune it wont get hot at least in my experience even when towing, 80psi of air in the front tires and normal in the rear.
I msde this just for the basically stock to mildly modified guys
Ole Schooler
What about no thermostat?
@@josepimp404 a lot of times with no thermostat you’ll find that the water will be moving too fast and it will take a long time to heat up. when it does finally heat up the water won’t be staying in the radiator long enough to cool off and it will run hot. In most cases anyway. I won’t say every vehicle will respond that way but that’s been my experience.
@D E I guess every bit of weight counts but Iv always heard the older crowd at the drag strip say it makes the oil run hotter which will make less oil pressure causing the oil pump not to drag the motor quite as hard. Although since I made this comment 2 years ago my friend who owns a race engine shop dynoed a motor with a stock oil pump and swapped it for a high volume pump and it made no difference. So that 2 quarts low thing is just a myth. However you would loose 3.5 pounds by removing the 2 quarts if you consider that to be worth anything lol
Good recommendations for a track truck only, not your daily. As ocd as you are about stripping all the unnecessary weight, im surprised to see you're a king size snickers bar. Just an observation, good vid 👌
Did you just swap cam? Link to the cam?
Any other mods required to just swap cam
Your truck cammed
Your driveway is calling for a Hellcat Challenger widebody
Iol thanx man its calling for something
No way I like seeing what he’s done with a stock ram and beating factory muscle cars. Where would his content be?
Get something we can watch you mod bro not something that already comes decked out. Love your sleeper Ram!