How to Replace a Snowblower Drive Belt, Troy Bilt, Cub Cadet, MTD, Craftsman Drive Belt Replacement
Вставка
- Опубліковано 5 вер 2024
- In this short video I show you how to change an auger belt on a Troy-Bilt or similar 2 stage snowblower or snow thrower.
Replacement Drive Belt: amzn.to/3rNamEG
Amazon Affiliate Link
Stens 265-472 OEM Replacement Belt/MTD 954-04260, Replaces OEM: MTD 954-04260, MTD 754-04260, Cub Cadet 954-04260, Cub Cadet 754-04260, Fits Model: Cub Cadet 524WE, 526SWE, 528SW, 528SWE and 530SWE; MTD Most 700 series, Belt Type: Covered, Belt Application: Drive, Length: 35", Width: 3/8"
If you'd like to pick up the replacement drive belt used in this video: amzn.to/3rNamEG
*Amazon Affiliate Link*
Thank you for watching! If you found this video helpful please give it a THUMBS UP 👍 and consider subscribing! THANK YOU! I appreciate all the support!
SUBSCRIBE HERE ▶︎ ua-cam.com/channels/8BzgKWkH0AGzCOORKK7Vwg.html
Great video, and good step by step instructions. My only tip would be to speak a bit slower & louder for us older guys.😃
Bought this for my small back deck in the Eastern Sierra. ua-cam.com/users/postUgkxoHYZbq5g9fkcAtinlTqstNlje-UQkCHN We get A LOT of HEAVY snow so I was a bit skeptical but it was worth it! After the first storm of the year this has exceeded expectations! It throws snow very well, even 10-12” + that said the more it piles up the harder it is to maneuver the machine. It is exceptionally light weight and overall exactly what I was looking for. If you have a large amount of snow and a lot of area to clear, you may consider something with a drive engine to help maneuverability, but for decks, second stories, roofs etc, you can’t beat the light weight to great snow throwing ratio. Side note, the chute rotator is a bit flimsy and it initially didn’t seem to work, after a few uses it seems to have loosened up.
I’m in the Northeast as well and we sometimes get 12+ inches of snow or more and I can report that the snowblower handles it decently well as long as you keep the speed down and don’t try to force it through the snow. Be sure to check out my other snowblower maintenance videos if you are interested and good luck this coming winter! Thank you for watching and please consider giving the video a thumbs up if you haven’t already! Thank you!
I never would have thought to take off the top panel to get to the belts (I've never had a snowblower before and I'm not much of a handyman). I just knew my drive belt was messed up and the manual tells you to take it to a professional because it's too difficult. Thanks for the walk-through! Saved my back!
I’m glad you found it helpful and were able to save yourself some money by not taking it to someone! Thank you for watching, be sure to check out my other snowblower maintenance videos if you are interested and consider giving the video a thumbs up if you haven’t already! Thank you
Thanks! This made the belt swap far easier. You wouldn't believe the very wrong approach I started to take for this task before backing out and finding your video and laughing at my wrong ideas.
I was right there with you! Videos showing me taking the whole front housing off for a belt…glad I found this one!
The piece I needed was that top cover. After that I had the popped off belt fixed in 10. Thanks for this awesome video. Not sure why the belt popped off...but I'm too cheap to replace it right now
You greatly helped me out with your easy steps to replace the auger and drive belts today. Thanks 👍 😊
That's great, I'm glad the video was helpful! Thank you for watching and please consider giving the video a thumbs up if you haven't already! Thank you!
Thanks for the info. Very helpful, The one thing I did was to tie a string onto the belt when removing so that I could pull the new belt trough. Other than that it was exactly the same.
Thank you so much. My belt somehow came off the tensioner. What a pain. $900 a couple years ago for this so i wouldn't have the stress of wondering if my ancient one would fail. Guess i should have just kept it running and paid a snow plow guy three or four times a year! lol. Now, which video shows how to adjust the cable so i get all my gears back. i only get one reverse and low reverse is now #1 forward. Geeze. They aren't built in Troy NY anymore!
Thank you for watching, I’m glad you found the video helpful. I haven’t done a video on how to adjust the cable. Maybe that is something I can do in the near future but in the meantime (without looking at it) I believe there is an external adjustment on that cable that will give you back more “gears”. Thank you again and please consider giving the video a thumbs up if you haven’t already! Thank you!
Thanks so much for a no fluff video!! Huge help!
Thank you for watching, I'm glad it was helpful and that you appreciate my no fluff style of making videos! Please consider giving the video a thumbs up and also checking out my other snowblower maintenance videos if you are interested! Thank You!
Your video helped me so much with the belts on my snow blower thank
Thank you for watching, I’m glad it was helpful! Please consider giving the video a thumbs up if you haven’t already! Thank you!
THANK YOU SO MUCH! It is so nice to have quick videos like this. Iiked, subscribed, and hit the notification bell.
Thank you for watching, I'm glad you found the video helpful and liked and subscribed! Thank you!
Thanks, drive belt just broke yesterday. Its an older 'White' model so i have to figure out what belt it needs. Any tips? And then i guess i'll give this a shot.
Product was as advertised.
Hello the drive on my 24" Craftsman snowblower was much slower by the time I had finished clearing the driveway. The machine only has about 12 hours of use so I doubt the drive belt is worn out ? I see from the video there is a spring loaded tensioner so can the belt be slipping ?
The snow today was very wet and very heavy. Could the belt just be wet and slipping ? Thanks
Great instructions thank you!
Thank you! and thank you for watching, be sure to check out my other snowblower maintenance videos if you are interested and consider giving the video a thumbs up if you haven’t already! Thank you
Hi wanted to know is the Hoger Belt the same size off the drive belt
I have a I have a snowthrower, Vortexx, 2490, three stage. It starts up, but none of the augers move when I press the lever. The sound changes as though it is running, but it is not. It is definitely not this year pins. The belt is a little loose. Could that be the issue?
Thank you
Well done thank you very much for a great video.
Thanks for watching! Thank you for the compliment and please consider giving the video a thumbs up if you haven’t already! Also I have many other snowblower maintenance videos on my channel if you are interested! Thank you!
Thanks!
Thank you for watching! I’m glad you found it helpful! I appreciate the support!!
Thanks
Thanks for watching, I’m glad it was helpful! Please consider giving the video a thumbs up if you haven’t already! Thank you!
I'm replacing both belts while I'm in there
That's a great plan, it's already open so that makes perfectly good sense to me. Thank you for watching!
When the unit it tipped up like that, doesnt oul go all over and in the engine?
If you pull the recoil starter slowly until you feel compression, the valves are closed and shouldn’t let oil leak in. Also be sure to make sure the filler cap(s) are closed tightly.
@@5MinuteFixit Thanks!
Not sure if u are still.active. the tensioner doesn't seem to tighten up against the belt. And the belt seems too long. Wont engage. When handle is pulled. Been told belt is not available and have a suppose same size aftermarket
Is the belt you are referring to that doesn't tighten up with the tensioner a new belt? If so it probably isn't the right belt for your machine or the tensioner needs to be adjusted. The tensioner should pull the belt very snug. Hopefully this helps, thank you for watching!
Why does the manufacturer tell you to split the frame and auger housing to change belts, seems like a lot more wore than needed?
I agree it is more work.
What do you do when the tension pulley spring snaps when you pull it back?
If it physically breaks you’ll have to replace it unfortunately.
I need the auger belt replaced,, any tutorial on that
Yes here you go: ua-cam.com/video/hwgD3UyuooU/v-deo.html
Thank you for watching and please consider giving the video a thumbs up if you found it helpful! Thank you.
I just replaced my
Drive belt and the thing snapped in half again! Not sure what is going on but looks like the tensioner is bent and causing this. Any ideas?
I would say if the tensioner is bent it is probably causing the belt to chafe or cutting the belt somehow. I would definitely replace the tensioner otherwise I think this will keep happening. Hopefully this helps, thank you for watching!
The tentionner bracket may have worn out like mine, replace the bracket, the bearing, belts (all) and the yager bearing, note the top pulley comes apart just remove the center bolt and disassemble one by one and clean the inner pulley by removing any pieces of belt! Cheers