I’m glad it was helpful and thank you for the kind comment. Please give this video a like, subscribe if you haven't already and share my channel to help it grow! It would be greatly appreciated.
Great video. Thanks. I need to do this job because my impeller froze to the auger housing and I burned through the belt before I realized what was wrong. My bad. First time that has happened in over 40 years of blowing snow. Live and learn.
Hi Patrick, sounds like you have had very good luck!! 40 years! Please give this video a thumbs up if you liked it, subscribe and tell your friends to help my channel grow. It would be greatly appreciated. Thank you for watching:)
Just used this video to fix my snowblower so thanks. One thing to add is that the top pulley is a two piece version so if you remove the bolt you can just slide the belt on and squeeze it in place as you put the pulley halves back together. Note, if you look closely you can see the center line between the two halves of the pulley.
I'm glad it was helpful and thank you for the kind comment. I have been doing this for over 33 years so I have done it a few more time then the normal person, LOL! I'm glad it all worked out and your back up and running :). Please give this video a like, subscribe if you haven't already and share my channel to help it grow. It would be greatly appreciated! Take care.
I'm glad it was helpful. Thank you for watching and the kind comment. Please tell your friends about my channel to help it grow. It would be greatly appreciated.
Im glad I was able to save you a few $$$. Please click on the thumbs up button, subscribe and tell your friends to help my channel grow. It would be greatly appreciated.
I'm glad this video was helpful. Thank you for watching and the kind comment. Please give this video a like and tell your friends to help the channel grow. It would be greatly appreciated.
I will have to try this. I watch so many other videos where they empty the gas tank and flip it on the auger housing. I feel like this will save me the hassle of doing that.
Hi Josh, I'm glad it was helpful, Thank you for the kind comment and for watching. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated :)
I replaced the belt with the oem MTD one. Now the problem is at the very first, engines starts, auger does not engage (suppose be this way). But after I press the handle to engage it once, the auger remain engaged while the handle is in the up position. Thoughts? Maybe I should loosen up the auger belt tension?
I cannot tell you that. I use the model number from the machine and look on the internet parts look up to find the correct part number for the machine I am working on. You need to do that. Once you get your part number, you can either purchase the correct one at your locals MTD dealer or you may be able to call a local automotive store and they may be able to cross reference the original part number to a aftermarket belt.
Impossible to diagnose without seeing the machine. Is the belt not turning because it’s not properly adjusted? Is the belt OEM? (original manufacturer equipment). Are the augers spinning freely or can you spin the large pulley that drives the augers? When the engine is running and the auger handle is engaged, what is the tension?
The dialog talking through this video is very helpful. Describing everything going on, little tips and hints really help. Great work!
I’m glad it was helpful and thank you for the kind comment. Please give this video a like, subscribe if you haven't already and share my channel to help it grow! It would be greatly appreciated.
Showing stuff as you are describing it sure does help the understanding of the process. Kudos cameraman!
Great video. Thanks. I need to do this job because my impeller froze to the auger housing and I burned through the belt before I realized what was wrong. My bad. First time that has happened in over 40 years of blowing snow. Live and learn.
Hi Patrick, sounds like you have had very good luck!! 40 years! Please give this video a thumbs up if you liked it, subscribe and tell your friends to help my channel grow. It would be greatly appreciated. Thank you for watching:)
Just used this video to fix my snowblower so thanks. One thing to add is that the top pulley is a two piece version so if you remove the bolt you can just slide the belt on and squeeze it in place as you put the pulley halves back together. Note, if you look closely you can see the center line between the two halves of the pulley.
Good looking out! Please give this video a thumbs up and tell your friends to help my channel grow! It would be greatly appreciated:)
Hey thanks a lot this video was very helpful! You made this look easy, it took me a while longer but I managed to get it done .
I'm glad it was helpful and thank you for the kind comment. I have been doing this for over 33 years so I have done it a few more time then the normal person, LOL! I'm glad it all worked out and your back up and running :). Please give this video a like, subscribe if you haven't already and share my channel to help it grow. It would be greatly appreciated! Take care.
Nice video!! Followed it and all went smooth!! Thanks!!!
Hi Leo, glad to hear! Thank you for the update.
Thank you very much for the guidance and tips
I'm glad it was helpful. Thank you for watching and the kind comment. Please tell your friends about my channel to help it grow. It would be greatly appreciated.
Great video. You save me $200, thanks!
Im glad I was able to save you a few $$$. Please click on the thumbs up button, subscribe and tell your friends to help my channel grow. It would be greatly appreciated.
Thank you! It helped considerably
I'm glad this video was helpful. Thank you for watching and the kind comment. Please give this video a like and tell your friends to help the channel grow. It would be greatly appreciated.
I will have to try this. I watch so many other videos where they empty the gas tank and flip it on the auger housing. I feel like this will save me the hassle of doing that.
I hope all goes good! Let me know how you make out.
Awesome video. thank you.
Hi Josh, I'm glad it was helpful, Thank you for the kind comment and for watching. Please give this video a thumbs up, subscribe and tell your friends to help my channel grow. It would be greatly appreciated :)
great job
Thank you, I'm glad it was helpful. Thank you for watching and the kind comment. Thank you for supporting my channel, It is greatly appreciated.
Thanks!
I'm glad it was helpful.
I replaced the belt with the oem MTD one. Now the problem is at the very first, engines starts, auger does not engage (suppose be this way). But after I press the handle to engage it once, the auger remain engaged while the handle is in the up position. Thoughts? Maybe I should loosen up the auger belt tension?
Yes, loosen belt tension
What size is the auger belt?
I cannot tell you that. I use the model number from the machine and look on the internet parts look up to find the correct part number for the machine I am working on. You need to do that. Once you get your part number, you can either purchase the correct one at your locals MTD dealer or you may be able to call a local automotive store and they may be able to cross reference the original part number to a aftermarket belt.
I installed the new auger belt and now the new one isn't moving. What gives?
Impossible to diagnose without seeing the machine. Is the belt not turning because it’s not properly adjusted? Is the belt OEM? (original manufacturer equipment). Are the augers spinning freely or can you spin the large pulley that drives the augers? When the engine is running and the auger handle is engaged, what is the tension?