For phone users Timestamps: Supplies - 1:30 Megaman X - Hot Water x Hair Dryer - 4:53 Figma Deku Clone - Pledge Floor Care Mod - 9:44 Marvel Legends Spider-man - Super Glue Water Method - 12:06 Clone Revoltech Wolverine - Soap x Hair Dryer - Loosening Joints - 14:42 Clone Figuarts Spider-man - 17:00 S.H. Figuarts Gotenks - Face Plate Tightening - Super Glue x Accelerator Mod - 17:17 McFarlane Cuddle Team Leader - Back Bling Fitting - Hair Dryer Method - 20:49 Toy Biz Raimi Spider-Man 2 - Super Glue x Water x Pledge Floor Care - 21:49 Clone S.H. Figuarts Hulk - Super Glue x Water mod - Joint Tightening - 28:01 Figma Genji - Pledge Floor Care Mod - Tightening Joints - 29:27 S.H. Figuarts Goku (original) - Pledge Floor Care Mod - Tightening Joints - 31:00
26:40 me too!!!! I bought that figure after I got my first job when I was 17. I always wanted a Spiderman toy when I was a kid. Mine is super loose now too and I remember him being so great. I'm so glad I can't try fix him! Thanks heaps!!!!
The broken parts can be reconnected , yes it involves superglue but also a metalic wire(this can be obtained from paper clip) and also precision and technique.Make a deep hole(in the center) to both broken parts in order for the metalic wire to fit and put superglue to the end parts of the wire and also put superglue around the holes of both broken parts .In the end when the superglue has dried then put supergluer around the connected area.From an estetic point of view it won't be appealing.
@@suhtangwong Yeah but I discovered a new way that works really good: small paper towel piece. Just put the paper towel piece over the ball joint, put the leg on, and boom just like new
These are great tips As for the extra strong super glue, I find it works well to dip a straightened paper clip into the glue, and apply it that way, because a drop is generally too much of the strong stuff.
I just fixed a bootleg sh figuarts vegito with the superglue trick, IT WORKED LIKE A DREAM! I'm so excited right now because this is my first time modifying a figure, AND I needed a Vegito figure.
@@gg_mydog968 Man I feel bad for ya. Your parents really suck when they say that ( no offense). Whenever my parents see that I want a figure, they are 100% ok with that, especially my dad because he's also interested in the same thing that I am. My mom is just fine with it, but its not really her thing so yeah.
I am happy this was in my recommended feed! I will definitely try the pledge floor care method for the joints on my Indoraptor figure; it is already getting loose in some places.
Highly recommend silicone shock oil for loosening tight or stiff joints. Designed for professional RC car shocks, it's safe on plastic or metal and way more effective than soap or hot water. Had great success on brittle nendroid joints, and fragile locked/squeaky joints for a Chogokin Fireball Charming Drossel.
Bruh, it's like toy review with Filthy Frank. I found his channel like 3 years ago. Knowing have stepped on a gold mine, I mined all his videos in few weeks XD
Should I try the super glue and water method on my SHF SSJVegeta 1.0? Same exact problem and joint as the spider man used for the water and glue method in the video at 13:15
I am going to try Bob's glue, but I have never been successful having any type of glue actually hold action figures. The plastic is so smooth and shiny.
Guys don't use the hair dryer like he does. Obviously he shows his mistake but you should never use the hair dryer as close to the figure as he did... Melts plastic, ruins paint, warps easier etc. Hold the dryer about two inches away for great results
@Commissioner Badgeface Have you gotten an answer or tried anything yet? If not I've used clear gloss paint from Tamiya (clear X-22) is the item number. I hope that that helps. But there are other methods as well. Just let me know and I can recommend some other methods if that would help. It all depends on the size and weight, type of joint, ect., ect.... That way you or I can better assess what method will work best for the figure that you want to repair.
Does the hot water remove paint and after you put it in the hot water will it become easier to come off all the time and dose the same apply to the hair dryer and how long does it take for you to take them off?
Great video. I have a question that no one is covering. Is it possible to disassemble the DC Direct green lantern line specifically the: DC Direct Green Lantern Action Figures series 1published in 2005 by DC Direct. The arm shoulder joints break easily and require replaced.
What's the best method to fix a loose bicep swivel on a Mafex Spider-man? The bicep piece slides over the elbow joint mechanism. I need to tighten the peg that goes into the deltoid. Is nail polish safe to use to "thicken" pegs?
Spider Man 2, I had one of those bad boys growing up, and ALWAYS talk about how elite it was as a toy. Absolute favorite, even after the fingers on the left hand came off. I treated my action figures well and didn't like to share, and that was why. Next time the leg got ripped off, and my Iron Spider figrue got it's arm broken off. I was almost happy when I started getting bullied for "playing with dolls" after 10. Almost... still made me stop playing with them at 14, and sold them all when I moved out at 19. Huge mistake....
Hello Man. I bought a Captain America Revoltech Yamaguchi and its shoulder ball joints just, broke. At the first time that I was trying to pose it, it just broke. Do you have any tips on how can I fix it? Tks and congrats for the channel!
This is great thank you so much!!! If there’s one thing that I hate most in my collection it’s broken figures. Hopefully this’ll help me when I decide to fix them. Subscribed! If there’s one question that I have and I don’t know 100% if you covered it in this video is how do you attach back broken joints? I have a mafex Batman where his leg joint snapped and I used loctite to put it back together but it just keeps breaking apart. I would love if I could fix him and if you have any tips please tell me. I would really appreciate it!
one of my expensive figures handlebars fell of would some super glue work to fix this problem? on his bike and i really like this bike it came defective
For a stuck thigh swivel that won't move at all, would you recommend heating it up? I worry that it will soften the plastic and just twist/rip the joint inside and break
Does the pledge thing work for butterfly joints and the ab crunch because I have a pizza spider withy really loose butterfly joints and really loose abs
I'm on the fence about getting the mega man x bootleg, the tight arm seems to be a consistent issue, is there a way to loosen it without completely melting it?
How do you clean marks off? I tried alcohol and nail polish on the hands of my Sh figuarts full power Broly figure and the green marks they randomly have wont come off
Is it okay to use super glue & hot water method to tighten joint on ball joint leg both right and left leg? Cause my bring arts Sora ball joints has been loose.
This is kind of late but I have a problem with my Sh figuart ssgss gogeta and his arms are extremely tight. So when I tried to loosen it I broke da arm. :/ So I got another one and it has the same problem which is so unfortunate. At least it’s not as tight as broken arm gogeta.
My SROE Goku got his neck joint broken. Not the head or the Neck but the actual joint. It broke while my friend was playing with him a year or 2 ago I think. It recently broke again in the same place 😭
Hey so I had to fix my 3.75 Deadpool head cause it broke off I used super glue and knowing my hands little to big I mess it up and a It dripped I didn’t think bout using brush I was worried bout my figure but can you tell me if you how to remove super glue without the paint coming off
I want to fix my husband's Joker action figure from when he was a kid. Our current kids broke the head off some how. Not exactly sure how to fix it with super glue because the head needs to move around. Any tips?
ANY ONE TRY THE HOT GLUE TECHNIQUE , FOR BALL JOINTED ARMS OR FEET THAT FALL OFF?I HEARD YOU FILL THE SOCKET WITH HOT GLUE THEN RUB VASELINE OR CHAPSTICK ON THE BALL PEG.THEN INSERT AND TWIST.DOES IT WORK? THANKS !
For phone users
Timestamps:
Supplies - 1:30
Megaman X - Hot Water x Hair Dryer - 4:53
Figma Deku Clone - Pledge Floor Care Mod - 9:44
Marvel Legends Spider-man - Super Glue Water Method - 12:06
Clone Revoltech Wolverine - Soap x Hair Dryer - Loosening Joints - 14:42
Clone Figuarts Spider-man - 17:00
S.H. Figuarts Gotenks - Face Plate Tightening - Super Glue x Accelerator Mod - 17:17
McFarlane Cuddle Team Leader - Back Bling Fitting - Hair Dryer Method - 20:49
Toy Biz Raimi Spider-Man 2 - Super Glue x Water x Pledge Floor Care - 21:49
Clone S.H. Figuarts Hulk - Super Glue x Water mod - Joint Tightening - 28:01
Figma Genji - Pledge Floor Care Mod - Tightening Joints - 29:27
S.H. Figuarts Goku (original) - Pledge Floor Care Mod - Tightening Joints - 31:00
Underrated comment
Thx
Lol thanks
Ty
Thx
26:40 me too!!!! I bought that figure after I got my first job when I was 17. I always wanted a Spiderman toy when I was a kid. Mine is super loose now too and I remember him being so great. I'm so glad I can't try fix him! Thanks heaps!!!!
The broken parts can be reconnected , yes it involves superglue but also a metalic wire(this can be obtained from paper clip) and also precision and technique.Make a deep hole(in the center) to both broken parts in order for the metalic wire to fit and put superglue to the end parts of the wire and also put superglue around the holes of both broken parts .In the end when the superglue has dried then put supergluer around the connected area.From an estetic point of view it won't be appealing.
Am I the only one getting toy story 2 vibes....
Stealth KY you can’t rush art
No i am to
I agree
For tightening joints, I use clear nail polish, which dries in minutes or seconds.
I used nail polish for my super saiyan full power goku's legs and it did not work very good
@@2735angel did you let it dry out first?
@@suhtangwong Yeah but I discovered a new way that works really good: small paper towel piece. Just put the paper towel piece over the ball joint, put the leg on, and boom just like new
@@2735angel lol yeah that works too lol no one will notice.
11:39 “I don’t wanna be a hero anymore “
Teddy Rider77 oh my gosh 😂
Wow great info .... the five year old in me cried out for joy when I saw you fix them back to health! You’ve earned a new sub for sure
These are great tips
As for the extra strong super glue, I find it works well to dip a straightened paper clip into the glue, and apply it that way, because a drop is generally too much of the strong stuff.
i can tell you really love figures the way you touch them, thanks fot the tips!
19:06 "It will fuse!" He says while repairing a fusion.
oh shut up.. THEY ARE COMIC BOOKS!!! 😂LOL
JK
it's funny talking about "graphic novels" thang... ppl get so up in arms over that kind of stuff... lol
I really appreciate this, thank you so much- think you could do some serious joint repairs for breaks?
Will add this video to my LIKED video.. watching it later!
Thanks for sharing!!
...you know there is a “watch later” button on every video right?
I just fixed a bootleg sh figuarts vegito with the superglue trick, IT WORKED LIKE A DREAM! I'm so excited right now because this is my first time modifying a figure, AND I needed a Vegito figure.
There not dolls mom there action figures
😂😂😂 what Shartimusprime says
*They're
Same my dad and my mom always tells me that when I want to buy Action Figures because : ‚,YOURE TO OLD FOR THIS „
@@gg_mydog968 Man I feel bad for ya. Your parents really suck when they say that ( no offense). Whenever my parents see that I want a figure, they are 100% ok with that, especially my dad because he's also interested in the same thing that I am. My mom is just fine with it, but its not really her thing so yeah.
@@Borger3941 damn you’re lucky take care of you you’re figures and your parents
neat i have tones of floor care cleaner now I have a use for it
I am happy this was in my recommended feed! I will definitely try the pledge floor care method for the joints on my Indoraptor figure; it is already getting loose in some places.
Highly recommend silicone shock oil for loosening tight or stiff joints. Designed for professional RC car shocks, it's safe on plastic or metal and way more effective than soap or hot water.
Had great success on brittle nendroid joints, and fragile locked/squeaky joints for a Chogokin Fireball Charming Drossel.
You Watch Jobby, Hmmm A Man Of Culture I See
Bruh, it's like toy review with Filthy Frank. I found his channel like 3 years ago. Knowing have stepped on a gold mine, I mined all his videos in few weeks XD
Thanks for this! Very useful! I have a few figures in my collection in mind that could use some of these treatments.
Should I try the super glue and water method on my SHF SSJVegeta 1.0? Same exact problem and joint as the spider man used for the water and glue method in the video at 13:15
My Piccolo is loose as F. I really need to try the floor finish method. Thanks.
i used the super glue/hot water method on my marvel legends black panther, and it worked really well!
Two uploads in one day?! Heck yeah
Further more 19:17 is the hidden Simpson child that was lost in time
I should try that Pledge Floor Care method with my old Play Arts Lightning's leg joints.
The title of this vid should be "watch me become a figurine surgeon for 36 minutes"
I am going to try Bob's glue, but I have never been successful having any type of glue actually hold action figures. The plastic is so smooth and shiny.
You can use some sandpaper to rough up the plastic before applying the glue.
@@dstar01 Thanks for the idea!
Guys don't use the hair dryer like he does. Obviously he shows his mistake but you should never use the hair dryer as close to the figure as he did... Melts plastic, ruins paint, warps easier etc. Hold the dryer about two inches away for great results
@@dstar01 still a little too close for my tastes but I did see that. This comment was written while watching the video. I have finished it now
@Commissioner Badgeface Have you gotten an answer or tried anything yet? If not I've used clear gloss paint from Tamiya (clear X-22) is the item number. I hope that that helps. But there are other methods as well. Just let me know and I can recommend some other methods if that would help. It all depends on the size and weight, type of joint, ect., ect.... That way you or I can better assess what method will work best for the figure that you want to repair.
Does the hot water remove paint and after you put it in the hot water will it become easier to come off all the time and dose the same apply to the hair dryer and how long does it take for you to take them off?
my sh figuarts sagat has very tight right shoulder now when i try to raise it forward i can see whitening in the ball joint. hope u could help 😭
You can use the blow dryer to accelerate the pledge and as far as that stuck knee I believe running alcohol should fix that as well
Dstar01 damn that’s tragic
Great video. I have a question that no one is covering.
Is it possible to disassemble the DC Direct green lantern line specifically the:
DC Direct Green Lantern Action Figures series 1published in 2005 by DC Direct.
The arm shoulder joints break easily and require replaced.
What's the best method to fix a loose bicep swivel on a Mafex Spider-man? The bicep piece slides over the elbow joint mechanism. I need to tighten the peg that goes into the deltoid. Is nail polish safe to use to "thicken" pegs?
Spider Man 2, I had one of those bad boys growing up, and ALWAYS talk about how elite it was as a toy. Absolute favorite, even after the fingers on the left hand came off. I treated my action figures well and didn't like to share, and that was why. Next time the leg got ripped off, and my Iron Spider figrue got it's arm broken off. I was almost happy when I started getting bullied for "playing with dolls" after 10. Almost... still made me stop playing with them at 14, and sold them all when I moved out at 19. Huge mistake....
Great video bro 🤙🏽but tour thumbs made me uneasy 😂 they are so flexible 😂
Hello Man. I bought a Captain America Revoltech Yamaguchi and its shoulder ball joints just, broke. At the first time that I was trying to pose it, it just broke. Do you have any tips on how can I fix it? Tks and congrats for the channel!
This is great thank you so much!!! If there’s one thing that I hate most in my collection it’s broken figures. Hopefully this’ll help me when I decide to fix them. Subscribed! If there’s one question that I have and I don’t know 100% if you covered it in this video is how do you attach back broken joints? I have a mafex Batman where his leg joint snapped and I used loctite to put it back together but it just keeps breaking apart. I would love if I could fix him and if you have any tips please tell me. I would really appreciate it!
Pledge for the win!
I will be using the super glue & accelerator trick on Gotenks’ face
Try using clear nail polish first
Jobby the Hong is my favorite UA-cam Channel
one of my expensive figures handlebars fell of would some super glue work to fix this problem? on his bike and i really like this bike it came defective
They make debonder solution to release super glued parts.
I need to try the Pledge floor care for my Lord Dakkon.
Is there a way to make a hole in the bootleg Mega Man D-Arts figure Buster attachment to attach the shots?
Does it matter what type of soap you use for the loosening joints method?
Thanks!
Think this would work on Hasbro wrestling figures? I have a few that could be tighter due to regular use.
How do I send in a broken figure to you?? 😭😭
How to fix a broken or severed joint using basic material found around the house and keep it moving ?
I have some problems with super glue. For some reason the glue makes the joint looser sometimes while other times it makes the joint tighter
Would u know if pledge multi purpose works on tightening joints?
Try clear nail polish in place of super glue and water.... the handed of ruining a figure goes way down and works just as well.
Hello do you have a vid on how to fix broken double ball joint on a revoltech? Figure fell :(
For a stuck thigh swivel that won't move at all, would you recommend heating it up? I worry that it will soften the plastic and just twist/rip the joint inside and break
No tamiya extra thin cement? I know it's a big tool to have for model builds but should transfer over well.
Have you fix a mezco leg joint before... Any advice
Does the pledge thing work for butterfly joints and the ab crunch because I have a pizza spider withy really loose butterfly joints and really loose abs
nice dude, i actually thought you just leave em all in one box forever lol
My SHF mark 85's right hand is loose. Would you have any advice to tighten it?
I'm on the fence about getting the mega man x bootleg, the tight arm seems to be a consistent issue, is there a way to loosen it without completely melting it?
How do you clean marks off? I tried alcohol and nail polish on the hands of my Sh figuarts full power Broly figure and the green marks they randomly have wont come off
How do you fix glued joints? Yknow if a peg got glued, how do you remove it?
Got any tips to fix a break between the waist and the pelvis?
What did you try on the spiderman broke in half?
Do you still do this because my UI goku s head broke please respond
I have an old spawn figure who's head popped off, it's a side to side rotating joint. How do you fix those?
Didn't think I'd learn anything here, but I honestly never saw the super glue / water technique.
Question, does pledge remove your figure paint? such as acrylic or enamel paint.
@@dstar01 i see, will try on my acid rain figures.
Have you made any Vids on how to Make a Ball joint from scratch!? I'm curious to see what method you have thanx
Good video, thanks for explaining the processes. I really like the Spider-Man Figure also.
It's not been reilly
Is it okay to use super glue & hot water method to tighten joint on ball joint leg both right and left leg? Cause my bring arts Sora ball joints has been loose.
Does it specifically need to be that glue?
Can someone help me on how to fix a mohawk grimlin figures ankle joint because it snapped pls help someone
This is kind of late but I have a problem with my Sh figuart ssgss gogeta and his arms are extremely tight. So when I tried to loosen it I broke da arm. :/ So I got another one and it has the same problem which is so unfortunate. At least it’s not as tight as broken arm gogeta.
Will pledge "clean it" work on tightening joints? It's so hard to find the "revive it" brand here in the ph...
Have you ever used Silicone, and or Hot Glue for loose joints!?
With all the spare parts you should try to make a new figuer
My yamaguchi wolverine left knee can barely go back so I will try the hot water tequnique
My SROE Goku got his neck joint broken. Not the head or the Neck but the actual joint. It broke while my friend was playing with him a year or 2 ago I think. It recently broke again in the same place 😭
Is there any thing else like the pledge floor care?
dstartoys.com/collections/repairs-and-services/products/dr-dstars-joint-fixer-elixir-action-figure-loose-joint-solution
Oh I ask to see if there any that like it but cheap?
How stiff does the floor cleaner make it
Hey so I had to fix my 3.75 Deadpool head cause it broke off I used super glue and knowing my hands little to big I mess it up and a
It dripped I didn’t think bout using brush I was worried bout my figure but can you tell me if you how to remove super glue without the paint coming off
My ssj blue kaioken Goku head joint is too loose for me to put the heat back on without snapping it any advice?
Do you know how to fix spider man butterfly joints because no matter what spider man figure I get his arms always snap off
Thank you good sir.. I now have the means to fix my figures subbed.
Added to my save list. Thanks for sharing!
How much did that hero academic figure cost?
I have a Roronoa Zoro with broken sword. Any idea how to fix it (the sword)?
thank you for this video, excellent tips
I liked this video so I can rewatch again if my figures broke(hope not lol) but very informative thanks !
JobbyTheHong is you here my dude!
Can I use the pledge WOODMAGIC 5 in one instead of the pledge floor care finish? As it is very hard to find now days... :(
Dstar01 I’ll try it out. But woodmagic is not clear is like a yellow colour. Hope that it doesn’t stain the figure. :(
This video is really cool!
I want to fix my husband's Joker action figure from when he was a kid. Our current kids broke the head off some how. Not exactly sure how to fix it with super glue because the head needs to move around. Any tips?
I need to see it. Email me at info@dstartoys.com
The coolest thing is that he first destroys the toys and then fix them whaaaaaaaat 💪😎
Any tips on how can i Tighten up a Revoltech Wolverine uper body joint?
Tryd the hardwood one in ur video but didnt seem 2 anything or maybe i didnt get the right spot???
ANY ONE TRY THE HOT GLUE TECHNIQUE , FOR BALL JOINTED ARMS OR FEET THAT FALL OFF?I HEARD YOU FILL THE SOCKET WITH HOT GLUE THEN RUB VASELINE OR CHAPSTICK ON THE BALL PEG.THEN INSERT AND TWIST.DOES IT WORK? THANKS !
I love Jobby too☺
Awesome videos! Keep up the good work! I love them!
I need to replace the ball and stem from the head joint on a goku black figure. Can you point me in the right direction?