Thanks. I changed all 3 bulbs today to LEDs. The wiring loom didn't come out of the hole in the boot and there was no way in hell I could fit the connector through the hole when refitting. I just had it coming out the side, That's how it must have been and I bought the bike from new I couldn't disconnect the odometer either but it wasn't that much of a problem.
Thanks. I changed all 3 bulbs today to LEDs. The wiring loom didn't come out of the hole in the boot and there was no way in hell I could fit the connector through the hole when refitting. I just had it coming out the side, That's how it must have been and I bought the bike from new
I couldn't disconnect the odometer either but it wasn't that much of a problem.
thats a beautiful narration brother. I have the same make and model and this helps me alot. thank you so much for the tutorial
I am really glad it helped. Thank you so much for your comment! Much appreciated. Kindly do watch my other entertaining contents on the channel.
Good video .....helps me in replacing my headlight...thanks
Nice,good effort to approach the sensitive device,congrats👍👍👌🌹
Congratulations and keep it up for great effort
Keep rocking brother.best wishes
Good Try,.Keeping doing👍
Thanks bro
Would you tell me what size ranch you used?
Nice bro continue 👌👍
Thanks alot bro!
Hello nice info dear,,, can we replace parking light with yellow light and glow like indicator as same parking light indication please let me know ...
@N S Absolutely, you can do that. You need to hook wires parallel from Indicators connection. I will try to make a video for that.
@@HPRGarage please do let me know how to ...so will make changes...I am to wait for how to do it
Thank you so muchh!!
Please provide product link
Which bulb is used for Honda CBR 150? Is it HS1?
H4 12V 55/60W
@@HPRGarage ok thanks...a local mechanic installed HS1 on my CBR
@@ajinkyajadhav1625 Not an issue! Both are identical, only difference is width of position/index tabs.
Hi brother! did you changed your Honda logo in your bike
Yeah bro! That was from Honda Shine.
@@HPRGarage how much did it cost you bro and was it easy to stick and how's the quality of it.?
If I remember correctly, the logo was between ₹450 - 500 INR and I fixed it using RTV Silicon sealant. So far there wasn't any problem.
I tried to remove the license plate holder, but the top seems to be welded so I can't take it off
Only the rods are welded on supporting plate. There will be two bolts for the holder. Can you please check again?
@@HPRGarage if I take it all, there's no place for back mirror bolt holder, so complicated 😄
It is much easier to remove light bulbs jf you place your hand under it. Not on top
That's one more way to do it. *Cheers*
Auf7e4