Hello, I don't know that you have ever noticed. If one uses the emergency kill switch to shut off the motor. Then one has to turn off the ignition switch to switch off the battery and accessories. Ding so as above means that to start the motor, one will have to turn on two switches. It might be easier and time saving to disconnect the emergency kill switch, so that one will only have one switch to activate every time. If I recall correctly this is as it was in the days pre-1968. Easier times then.
Hemant Bhai.. which ralco tyres. Whats the cost. I have done my tubeless conversion from you no issued Whatsoever did ladakh as well post that on stock typres but wanted to change the tyres now
Hemant Bhai, what is the effect of lowering the bike ? I mean will GC get reduced and do we need to set the front suspension also.. ? And how good is the material they used for that lowering kit ?Can it handle pillion rider also?
My feeling after riding the interceptor for 8 months is that the bike needs to be lowered as the rider height, riding angle, soft suspensions and bike weight.....all these factors are not correctly deaigned for the interceptor.....you sit on this bike and the seat is flat.....it is very willing to throw you off the bike on rough roads or speed breakers......that time the soft front suspension only increases the dip....so lowering the bike from rear will help reduce the front dip....thus making the rider feel a little planted
Bhai big fan 👍 great content I am also trying customize my INT 650 and your videos inspire a lot, to put some modification content on my channel 😊 Can you please recommend some thick tyres, that can be installed without making any framework changes.... ? 🙏 🙏
Hemantbhai, i have also installed the Way2Speed footpeg extension for driver, the long brake and gear levers are not stong assembly....the lever is shaking when you touch them slightly
@@sanjay3736 hello sir, sorry i was travelling abroad thus the delay in response. Way2Speed product is USELESS. It is not designed properly, the feet have to be spread out to operate the levers as they are 2- 3 inches away from the body of the bike.....quite poorly done. Better is to go with Indimotard foot pegs.
Hemant saw this video of yours. I reside in Kolkata. I want following mods in this video. 1) Fitting tubeless tyres. 2) Lowering saddle height 3) Seat change with lumbar support 4) Handle bar riser 5) Forward foot peg for rider. 6) Rear shock absorber mod to accommodate low saddle height. 7) LED headlights. How can I get in done in Kolkata.
I want back rest which has good height as j have modified my stock seat and Zana backrest is has very less height it is giving support to lower back only bot my back, so can you make one
I’ve used 2 inch risers and pulled stock handlebar towards me. But , I’m still facing pain on my right palm, on the throttle side. I tried to use AOM handlebar and still the same issue. I’d like to know what’s causing this issue. Will this handlebar help reducing the pain on my right palms at the accelerator side.
If risers and handlebars don't work, then it is probably due to rider error. You need to change your riding style and wrist position. You can also check with a physiotherapist whether you require wrist strengthening exercises. It could be due to wrist tendonitis, which I used to have.
👍excellent, hemantbhai.triumph exhausts are so much better.wish there was this kind of grunty sound exhaust for himalayan.plus saw the new scram411.crap.R.E has made pulao(scram) from shahi Biryani(himalayan)
Bhai aew free flow hai awr ye triumph street twin ka stock hai dono ke exhaust note me bohot farak hai . Awr bike ke owner ko free flow exhaust nahi chahiye tha that's y v used this exhaust which is light and sleak
Hemant Bhai need to know availability of rider foot peg extender, is it safe to use? Can you quote me the price of it and give me mobile number of the person using this extender so that I can have a exact feedback of it TIA.
Another fantastic and informative video from Hemant. Please keep up thr good work and see you in a few days for the W2S tubeless conversion.
Thnx sir
Hello, I don't know that you have ever noticed. If one uses the emergency kill switch to shut off the motor. Then one has to turn off the ignition switch to switch off the battery and accessories. Ding so as above means that to start the motor, one will have to turn on two switches. It might be easier and time saving to disconnect the emergency kill switch, so that one will only have one switch to activate every time. If I recall correctly this is as it was in the days pre-1968. Easier times then.
Sounds similar to Power Rage exhaust!
Hemant Bhai.. which ralco tyres. Whats the cost. I have done my tubeless conversion from you no issued Whatsoever did ladakh as well post that on stock typres but wanted to change the tyres now
Ralco speed blaster
Hemant Bhai. God bless you
Bohut badhiya modification sirji 👍👌.
Exhaust so lovely
Love from bilaspur chhattisgarh
Thnx brother
Nice job Hemant bhai..
Hemant Bhai, what is the effect of lowering the bike ? I mean will GC get reduced and do we need to set the front suspension also.. ? And how good is the material they used for that lowering kit ?Can it handle pillion rider also?
My feeling after riding the interceptor for 8 months is that the bike needs to be lowered as the rider height, riding angle, soft suspensions and bike weight.....all these factors are not correctly deaigned for the interceptor.....you sit on this bike and the seat is flat.....it is very willing to throw you off the bike on rough roads or speed breakers......that time the soft front suspension only increases the dip....so lowering the bike from rear will help reduce the front dip....thus making the rider feel a little planted
@@SatyamMishra-tk4fd 😂😂😂😂😂
Hi buddy what is the cost of rider foot pad shifter and pillion footpad shifter
With installation charges?
Hi Hemant, Bangalore mein aap jaante ho Kosiko Jo Interceptor ka accha kaam karta hai? Aapke jaise! Thanks,
Bhai big fan 👍 great content
I am also trying customize my INT 650 and your videos inspire a lot, to put some modification content on my channel 😊
Can you please recommend some thick tyres, that can be installed without making any framework changes.... ? 🙏 🙏
Hemantbhai, i have also installed the Way2Speed footpeg extension for driver, the long brake and gear levers are not stong assembly....the lever is shaking when you touch them slightly
Sir how has been your experience with the way2speed rider footpeg extenders please give a honest review. Also your no.tia
@@sanjay3736 hello sir, sorry i was travelling abroad thus the delay in response. Way2Speed product is USELESS. It is not designed properly, the feet have to be spread out to operate the levers as they are 2- 3 inches away from the body of the bike.....quite poorly done. Better is to go with Indimotard foot pegs.
@@SatyamMishra-tk4fd thanks sir for the valuable feedback.
Great work..!
Hemant saw this video of yours.
I reside in Kolkata.
I want following mods in this video.
1) Fitting tubeless tyres.
2) Lowering saddle height
3) Seat change with lumbar support
4) Handle bar riser
5) Forward foot peg for rider.
6) Rear shock absorber mod to accommodate low saddle height.
7) LED headlights.
How can I get in done in Kolkata.
finally some meaning full mods🙃
Jo footpegs shin bone pe hit karti hai jab paun zameen pe rakhte hai wo is shifter se sahi ho jaega kya...
Looks and sounds better than stock... Which exhaust mufflers are these?
Triumph street twin
How to buy these stock exhaust from triumph?
@@hdtcustoms11188 what is the cost or price of these Triumph exhausts?
So nice ❤
Sir iska handlebar riser kaise milega please batayiye. I want one. Nahi toh handlebar agar sale mein hai toh batayiye.
Hermant bhai, Can u refer any of your known person who dose neat work like you in Bangalore?
Brilliant work👍 Dilli me ho jayega kaam?
Sir aapne interceptor me konsa handle bar lagaya hai , plz iska naam batao
Zana ka handle bar hai
Rider foot peg extend karne se engine heat ka takleef hoga.
I want back rest which has good height as j have modified my stock seat and Zana backrest is has very less height it is giving support to lower back only bot my back, so can you make one
Is the way2speed foot peg strong enough for a rider to stand up on it?
Yes it is but not preferable for long saddling
Have you used Rd 350 handlebar on Interceptor...
It's not worth
Aew T102 i got changed. Awesome invt. Tubeless is pending
Need an appointment for front and rear footpegs shifting installation I’m coming from punr
Thanks 👍
hello from Galicia (spain) could you tell me where I can buy the extensions of the footrests
Watsapp me on +919819184823
Bhai is bike main jo seat lagi he wo kaha se milegi
Your handle bar is awesome could u share the link plz
Bro it will "mods" instead of "modes"
Hi there, , do you have a list of parts for this build please.
What is the tyre size you have used ? I think he should to change the filter and filter cover too with the exhaust change.
Stock specs size of tyres and no need to change filters bcs its not free flow exhaust
@@hdtcustoms11188 okay got it.
For a second I thought Tovino Thomas
Hemant bhai, Happy Diwali! I am from Kolkata. From where can I get the Interceptor front foot peg mods? Please help
You can order online www.hdtcustoms.com/product/pillion-footrest-for-re-interceptor-650/
Fantastic 👍
MASHA ALLAH
SUPERB JOB BRO
I’ve used 2 inch risers and pulled stock handlebar towards me. But , I’m still facing pain on my right palm, on the throttle side. I tried to use AOM handlebar and still the same issue. I’d like to know what’s causing this issue. Will this handlebar help reducing the pain on my right palms at the accelerator side.
If risers and handlebars don't work, then it is probably due to rider error. You need to change your riding style and wrist position.
You can also check with a physiotherapist whether you require wrist strengthening exercises. It could be due to wrist tendonitis, which I used to have.
What is the price of Triumph exhaust
What is this lowering kit from way2speed.
Is it the shocks that lower the seat height ?
Yes it's replacement part for stock shock absorber
👍excellent, hemantbhai.triumph exhausts are so much better.wish there was this kind of grunty sound exhaust for himalayan.plus saw the new scram411.crap.R.E has made pulao(scram) from shahi Biryani(himalayan)
Lol for biriyani
Handle bar details please
The triumph one looks like steel. Is it pure stainless steel?
Yes it is
@@hdtcustoms11188 how much does it cost? I couldn't find prices online
Whats your opinion of Meteor handlebar on interceptor?
I am using meteor Handel bar it works well and comfortable
@@isunil_reddy does the bike become as comfy as classic 350 for example?
Super❤❤❤
Faltu ka khrcha ise aacha aew
Accha he..thoda weight reduce hua hoga
Bhai aew free flow hai awr ye triumph street twin ka stock hai dono ke exhaust note me bohot farak hai . Awr bike ke owner ko free flow exhaust nahi chahiye tha that's y v used this exhaust which is light and sleak
Hemant I want that foot 🦶 peg both tell me the rates
Plz call tomorrow on 9819184823
Do you have the links for worldwide online purchase?
please contact on whatsapp +919819184823
How much seat height is lowered by way 2 speed shock
About an inch
@@hdtcustoms11188 thanks , can you please tell me the cost of this lowering kit
all interceptor 650 exhaust which are og is direct fit into the vehicle no need of any customisation i think this is fake exhaust
Silencer price bro
Got it for 20k
@@hdtcustoms11188 wow, that's a steal deal for 20k, much better than the usual aftermarket exhausts.
Hemant Bhai need to know availability of rider foot peg extender, is it safe to use? Can you quote me the price of it and give me mobile number of the person using this extender so that I can have a exact feedback of it TIA.
Yes the footpeg shifter is safe. Call for pricing on 9819184823
Sir can we put speed twin alloys for this??