2005-2019 Toyota Vehicle Stability Control (VSC) Full Reset No Special Tool (Shown On a 2011 Tacoma)
Вставка
- Опубліковано 21 сер 2024
- Hope this little video (my 200th video to date) helps you reset the very dangerous VSC issue you may encounter after changing suspension components or going with bigger tires, where your vehicle acts like it wants to throw you off a corner into a ditch. I'm glad I won't be afraid to go around another corner with this issue again!
Thanks for watching my videos please make sure you SUBSCRIBE!!
THANK YOU!!!! I've seen this solution before, but NO ONE would talk about WHY they were doing it!!! My 2014 was definitely FIGHTING ME on LEFT TURNS at 35-40MPH.... THANK YOU!!!!!!
@gomez619 I saw what you saw...people chasing phantom issues looking at faulty ABS systems and wheel speed sensors. YOU'RE WELCOME!!
Awesome and useful video! My truck was driving me nuts with it wanting to go into the other lane when turning with 35s. I just did the reset so hopefully it will work for me as well haha. Thanks!
@nickstavrakis I hope so too! Took me a few times going around sharper corners not to tense up even after this fixed it!! Lol!!
Works for 2004 Lexus GX470! Excellent!!
@tomfrancisco4487 it would be nice to have a full list of all the Toyota models and years this works with!
Nice job. I am gonna try it on a tundra
Faaaakin beauuuty she worked first go bud !! Thanks eh!
@victorziebenhaus3229 heck yeah that's awesome, no problem!!
It nice but you did show video which 🕳 you put in and how you put in that pin.in out in the bottom
My 09 has done this a dozen times. First I thought it was because my trailer was a little heavy but then I was noticing it while not towing anything and like under 40 mph on the highway. I think this should be some kind of safety recall because it's extremely dangerous. It puts you into a skid and your going into the other lane. Always on a right curve and Truck is skidding into traffic. I never felt I was driving to fast and when it was doing it without towing and under 40 there is definitely an issue. Hope your fix will take care of it. I just wonder how many are experiencing this in there Tacoma? Btw my tires are stock.
@johnnycat60 it would be nice to know how many accidents or issues this "safety feature" has caused!
How should that be a safety recall when YOU are changing the OEM suspension dimensions with larger tires or suspension??? It is clearly stated that a VSC reset should be done with an alignment or any changes to the suspension. You make a change to the suspension that causes the truck to not react the way it's supposed to and you want a safety recall??? LOL
Perty sure I stated in my comment that my truck and tires are stock. Nothing modified
Hey have this same problem with my 2006 Toyota 4 runner. Whenever I take a hard right or left or even on the same turn you took in the mountains it does the same thing where it brakes while I turn. We tried to replace the entire front and back abs wiring system and that didn’t work. Been trying to figure it out. Will try this out to see if it fixes my problem. Any suggestions?
@chrisavent8012 someone else replied and said this worked for their 4Runner. Even if you asked a dealership to do the VSC reset for you, it would be worth it. Sucks all the suspension work was done. I guess it's all new now but maybe not needed.
@@ShawnMartinNCBIRDMAN we had it zero calibrated bc I have a 3 in lift but it still makes that noise and brakes when turning.
2015 Camry it didn’t work for me. I have the push button to start so not sure if that matters
@jlk63 not sure but try it without pushing the brake pedal. My 07 Avalon is push start too and I'd guess it would need to be in the same "position" as the key on my Tacoma would (off-acc-on) mode ad in the video to compare.
Thank you ❤
@giopirmisashvili5514 you're welcome!
This is exactly what my 2012 Tundra is doing. Do you know if this works on Tundra as well?
@cliffordebel2977 I am not aware if it does or not.
What's the reason for not showing the actual PIN connections with the jumper wire?
@jascam1 are you saying while I'm inserting it in during my count while I'm showing the dash so you can see what happens when the lights change their flashing?
Thanks
@hamishlovesit4731 you're welcome!!
Hey hi brother In the 05 Toyota sequía I have to do it in the same pins?
Hi my name is Paul I have a Toyota hiace 2010 model yeah. if the vehicle was 60kmph the slip light came on what can I do plc
@paulmburu503 you might want to have the wheel speed sensors checked.
What does recalibrating actually do? Why does it stop the truck from locking up in the future?
@dizzle215 I mention it in the video, but Toyota programs parameters in the vehicle to check to make sure that the stability of the vehicle is solid, more than likely as in centered based on sensors in the vehicle. I'm not sure if they are like a gyroscope or what, but these relay information to the vehicle that the stability has been compromised and it tries to regain control by stopping the vehicle. For instance if you were off road and these parameters changed suddenly, the vehicle would try to stop so that whatever hazzard you were facing would be minimalized. I'd have to dig deeper to see what the parameters are if anyone knows, but since I had the exact symptoms mentioned in the Tacomaworld writeup and doing the reset fixed my issue, I left well enough alone. Thanks for the reply.
Thank you so much! I followed the steps in your video and everything matched up perfectly. I had this issue with the steering wheel sort of locking uo going about 60 miles an hour around the corner, so I’m pretty happy to hopefully have addressed it now. Thanks again!
@@dizzle215 that's awesome! Yeah, I found myself taking the same corner with a little hesitancy yesterday, just waiting for it to do it again, but it never did!!
Will this work on a 2012 Prius?
@pdxxjjeep good question but I don't know, you'd have to cross reference. I have seen other models using this same method.
Does this work for a 2015 avalon?
@demarwright2384 I have an 07 Avalon (good choice!) but I am not sure that it'll work. Does the 2015 Avalon have VSC?
Will this work with a 2019 Tacoma ?
@mileslake6760 the info I've seen says it stayed the same through 2023.
@@ShawnMartinNCBIRDMAN No. 2020 and up don't have the same pins at the obd2 port. You can do it with an advanced scan tool.
Good to know, I'm going to edit the info thanks for the feedback!
I tried it several times on my 2019 Tacoma and it didn't work.
My 2015 corolla is stuck in only park and is giving me the light with the car and lines what do I do man please help
@bestadjusters no check engine light?
No just traction control light and stuck in park unless I bypass with the button by the shifter. Airbag and traction control is on
@@ShawnMartinNCBIRDMAN help brother! Thanks for the reply
Nothing has been changed on the vehicle recently? Sounds like a wheel speed sensor isn't working so the PCM is putting it in a limp mode to keep you from driving til you fix the issue. I would honestly disconnect the battery and see if it was a stuck log 1st, then have the wheel speeds sensors checked and lastly it could be the neutral safety switch.
@@ShawnMartinNCBIRDMAN so what I did was try to install a CarPlay radio and didn’t disconnect the battery so some fuses went out my friend changed a couple but we don’t know where the abs fuse is or if it’s blown, he kept saying to reset it with a OBD scanning tool and it would come out of being stuck. What do you think?