You made the perfect video, and it fixed my issue after replacing my worn-out shocks that had 93k miles on my 2016 TRD Sport with TRD PRO Bilsteins that had only 6k miles. It ended up lifting it about 1.5-2".
Thanks for the heads up on the traction control reset, just had this code pop up after replacing both LCA's today. Also the flexi-head extension hack is definitely the best thing I've encountered in a while. Most of the times I end up using tape which does'nt always go over so well.
So ran into this issue after jumping my truck. The cam bolt slipped and the cam tab gussets were wrecked. Got new welded tabs and hex cam tabs that lock into the welded cam tabs. dealership wants $200 to recalibrate my VSC. If this works I will have spent less than a dollar on the wires at Lowe’s for what the dealership is charging $200.
@@infiniteprojects808 i already fixed it lol you showed me everything I needed to avoid spending $200 at the dealership lmao. Thanks for helping me save some money dude I really appreciate it
I have a link in the description with someone that does a better job explaining the whole process. It will take multiple tries as the timing is very critical.
Badass! Thank you. Just got the stability control system malfunction and the pre collision system malfunction at the same time. Going to try your suggestion.
Did you had problems when driving when the light came on cuz i have a isuzu dmax and when the esc light comes on while the car shift in gear it shifts hard.
yes the truck is a 2016 3rd gen. also check the link in the description. the other guy has a video that i followed. just take your time and it will take more than one try to get the timing right.
Didn’t work for me but I heard that some 19s and all above it doesn’t work? My solution was a local shop who hooked up a fancy scanner and did it for me. They didn’t charge me but told me the alignment shop should have done it for me when I got my alignment done. But didn’t need to go to Toyota and pay $200 bucks haha
@@NORTHSHOREEDITS Thanks for the information... I'm not lucky a guy with a fancy scanner caused this problem on 2018 Tacoma... Probably he doesn't know how to use the scanner...
try checking out the video that I linked in the description, the other guy does a better job at explaining the process. the hardest part is getting the timing down. It took me a couple tries.
I have a problem with my 2018 Toyota Tacoma same problem and Toyota dealer cannot find the problem. I would like to get in contact with you if you can help me out.
@MrSeth166 This didn't work. I have a friend that is a mechanic. He has a high dollar scan tool. He used it to clear this and several more codes that I had. Been good ever since now.
Worked for me 2016 tacoma, you’re the man.
You made the perfect video, and it fixed my issue after replacing my worn-out shocks that had 93k miles on my 2016 TRD Sport with TRD PRO Bilsteins that had only 6k miles. It ended up lifting it about 1.5-2".
cool beans. happy it helped you. the other guy I listed in the description has a more detailed video.. super cool that I could help you. 🤙
Thanks for the heads up on the traction control reset, just had this code pop up after replacing both LCA's today. Also the flexi-head extension hack is definitely the best thing I've encountered in a while. Most of the times I end up using tape which does'nt always go over so well.
Cool bro. The link has all the info and the hard copy. 🤙
So ran into this issue after jumping my truck. The cam bolt slipped and the cam tab gussets were wrecked. Got new welded tabs and hex cam tabs that lock into the welded cam tabs. dealership wants $200 to recalibrate my VSC. If this works I will have spent less than a dollar on the wires at Lowe’s for what the dealership is charging $200.
double check the video thats linked here, the other guy does a better job explaining the procedure.
@@infiniteprojects808 i already fixed it lol you showed me everything I needed to avoid spending $200 at the dealership lmao. Thanks for helping me save some money dude I really appreciate it
I just did mine and it worked perfectly.. thank you
awesome, glad it worked, the link in the description has a guy that does a better job explaining the steps. have a great day.
Will this work for a 2022? Or just cause me more problems?
I have a link in the description with someone that does a better job explaining the whole process. It will take multiple tries as the timing is very critical.
Is it working for Tacoma limited 2022 ?
check out the link in the description. the other guy does a more detailed job.
Awesome video!! I just lifted my 2017 trd or ...light came on .. ...and it went off just like you did it ❤❤
awesome, but If anyone has problems, check out the guy I followed. the link is in the description. 🤙
Thanks for posting this video brotha! 🤘🏽
hope it helps you. 🤙
It worked on my 4runner 2010 5gen, thanks, greetings from Chile
wow awesome!!!!! thank you sir, have a great day.
Definitely work.
Definitely thank you and Darrel.
Awsome. Thank you for checking out the video 🤙
Where you put the wire on the bottom mine does not have metal inside, it’s empty :/
try digging around under the dash. sometimes the factory will tape the connector up.
On the 4th hole there’s no fuse
Badass! Thank you. Just got the stability control system malfunction and the pre collision system malfunction at the same time. Going to try your suggestion.
Cool. And check out the link in the description. The other guy does it better than me. Just take your time. It may take several tries .
Did it work?
I am having the same issue post suspension replacement, did this work for you?
how you turn the ignition in punch stater without turn the car on ?
i think you might be able to push the start button only once with your foot off of the brake.
Did you had problems when driving when the light came on cuz i have a isuzu dmax and when the esc light comes on while the car shift in gear it shifts hard.
I did not drive the truck when the light came on. I immediately parked the truck.
Love the o ring trick, thanks
super glad the video could help 🤙🤙
Is your truck 3rd generation? If not do you know if this works on 3rd gen’s ? Thanks
yes the truck is a 2016 3rd gen. also check the link in the description. the other guy has a video that i followed. just take your time and it will take more than one try to get the timing right.
I try on my 2020 taco but didn’t work
check out the link at the bottom, the other guy does it better. the timing also is very hard to get it. took me many tries.
Master neded 2 wire cable one for everity hold
Would this work on a toyota avalon as well?
I would assume that toyota used the same electrical system in their line up. Also check the video in the link, the other guy goes into more detail.
Unreal , thank you so much !
I hope it helps. have a great weekend
Had the same problem on mine when i put my zone lift on. Not sure if leveled ground matter cuz i did mine on my driveway.
drove me nuts, but all good now. hahaha saw you driving home again. 🤙
How's your truck now?
It works for 4cl 2.7 ?
im not sure. I never tried it on a 4cl
Does this work on a 19!
It should. But use the link in the description. The other guy does a better job than me
How's your truck now?
Didn’t work for me but I heard that some 19s and all above it doesn’t work? My solution was a local shop who hooked up a fancy scanner and did it for me. They didn’t charge me but told me the alignment shop should have done it for me when I got my alignment done. But didn’t need to go to Toyota and pay $200 bucks haha
@@NORTHSHOREEDITS
Thanks for the information...
I'm not lucky a guy with a fancy scanner caused this problem on 2018 Tacoma...
Probably he doesn't know how to use the scanner...
Thank you just ran Into this now also after a 6 inch install
cool. let me know if it helps. take your time, it may take couple trys.
I tried this for trd off road did not work
try checking out the video that I linked in the description, the other guy does a better job at explaining the process. the hardest part is getting the timing down. It took me a couple tries.
good video....definitely did not work for my 19 TSS TACOMA....noticed the plug yours is white...and my is black...but...it has same prog pins
check out the link in the description. I put a link to a guy that goes into more detail than I do.
I have a problem with my 2018 Toyota Tacoma same problem and Toyota dealer cannot find the problem. I would like to get in contact with you if you can help me out.
Check out the video that i linked in the description. The other guy does a better job then me.
Thanks for the help brooooooo
Thanks for checking out the video. But the link in the description has a more in depth video.
Thanks you I fix the problem 😊😊😊😊
awesome. I love it when these videos help people.
@@infiniteprojects808 yes because you explained very good Steps by steps thank you very much
Nice bro thank you
thanks but the credit goes to the other guy. I linked the video in the description 🤙 .
THANK YOU
hope it helps. the link has a much better detailed instruction. it took me couple tries, so keep trying.
Doesn’t work on 2018 and above
try checking out the link in the description. the other guy does a better job at explaining the process.
Didn't work on my 2018 Tacoma. Tried many times. Wouldn't never flash at all
Check the video link. I used his video and it worked for me. The other guy does a better job explaining each step
I have the same problem on my 18 Tacoma...
Did you fix the problem?
@MrSeth166 This didn't work. I have a friend that is a mechanic. He has a high dollar scan tool. He used it to clear this and several more codes that I had. Been good ever since now.
@@Jaminjohnw
Thanks for replying...
I need to find a buddy who has a good scanner...
Than u for this vid.
The link at the bottom has a guy that goes into more detail
Bummer didn’t work for my 21 😢
The description has a link to another guy. And getting the timing down takes a while..good luck 🤙
Didn’t work on my 2020
Theres more info in the link bellow. Theres a guy with even more printed details. It also took me three tries to get the timing correct.
What did you have to do after all on that 2020?
thanks
happy to help 🤙