HOW TO replace Drive shaft and Stub shaft VW Transporter
Вставка
- Опубліковано 4 жов 2024
- Tutorial HOW TO remove and replace VW Transporter T5.1 drive shaft and stub shaft.
❗CV Joint was making clicking noise
❗Outer CV boot split
❗Hole in Inner CV boot
❗Play in drive shaft
DIY Guide how to do it easy and quick with no special tools on your driveway.
🔗Stub shaft ➡ www.auto-doc.i...
🔗Drive shaft ➡ www.auto-doc.i...
🔗EP2 Grease ➡ www.auto-doc.i...
======================================
If you found this video helpful! Please give us a thumb up 👍 leave your comment below ⬇ 💭
☕Buy a coffee ➡ ko-fi.com/jers...
🔔 SUBSCRIBE ON UA-cam
/ @jersovauto
Thanks for watching! 🙌
======================================
⚠️Disclaimer: This video is made for entertainment purposes only. You should always seek a professional advice.
#jersovauto #transporter #driveshaft #vwt5
HOW TO change Transmission Fluid /Gearbox oil 👉ua-cam.com/video/5IJZ7Rq9Aes/v-deo.htmlsi=zY4JUTCuagONeSco
I want to thank you! Today I replaced the parts as described in the video and thanks to you everything was perfect! I did all the steps as you explained. Thank you very much
good tutorial ,I have the T5,and the torque settings are tighten to 200,then slack off 180 degrees, then torque back up to 200,mine is the 2.5 tdi
Very informative kudos👍
Great Video!...a big thanks for your channel.
Great video my friend , very well explained
Perfect timing, I will get the parts tomorrow :) Good except for the torquing. Seems it was above 200Nm already and never "jerk" the torque-wrench.
I should probably invest into better torque wrench! Plus I would be paranoid nut 🔩 can come off since in has no split pin on shaft… just a nylon lock..Thanks for watching and commenting 👍 🤜
really helpful video, thanks mate
@@Olleh987 Your views and comments are my greatest motivation!!! 👍 🤜
you just on time mate. cheers👌
Really helpful, thanks for posting, btw do you need to drain the gearbox oil for this job?
@@joeblackman100 hi, no you don’t have to !!!
Thank you very much for the detailed explanation!
I have a few questions, is your car a regular gear? What is the cost of the parts?
@@מיכאלאלמליח-פ5מ 5 speed manual gearbox, parts approximately €250 cheers 👍 🤜
Great video. I have a driveshaft clunk and had the shaft and stub replaced, only to still have the noise.
Could this be because the wrong stub was used, or maybe internal gearbox play?
@@richardthorrington I wish I had an answer for you.. but I don’t think it can be because of wrong stub size…noise maybe coming from completely different place…for example I had worn water pump which was making weird noises 🤔
Good video, what engine is yours and am I right that the stub axel shaft is only on the offside
It’s 2.0 tdi CAAB 75kw , you r right stub is only on offside. Thank you for watching 👍 🤜
Great video I feel I can do mine now but need to ask is the seal part a part of the stub or a completely different part as I have leakage too. Or would leak be because the stub is knackered which it is ta
@@scottkelly-e5x New stub comes with new seals and bolt…since my seal inside gearbox which surrounds ur stub was fine I didn’t bother changing it.. perhaps when I will be changing stub next time I’m gonna have to do it. It’s really not that difficult to do.. u just need to pry an old one and then carefully place new one with light tap of rubber mallet. Good luck with yours! And thanks for watching!!! 👍 🤜
@@jersovauto thank u sir