VW Transporter drive shaft judder? .... Solved!
Вставка
- Опубліковано 29 лис 2023
- For updates sign up for our news letter if you don't already. Here - transporterhq.co.uk/subscribe/
These are something that have just needed to happen. As I said in the video, SOME Transporters suffer from driver shaft judder when low. I don't mean 70mm lower, I mean proper low. Sub frame raise's are ok but it's a big job and can't be done to new Transporters. These Solow shortened drive shafts are OEM quality with a 2 year warranty.
Price to be confirmed but less than the modified version were original. These are factory made shorter and to the highest quality. These have cost so much the develop and proto-type, we've had to focus on the most troubled vehicles first. Once they are up and running, well start adding all the other shaft options.
The first batch will be T6.1 110, T6 102 (Euro 5 and Euro 6) and T5 preface 2.5's. Really sorry thats all we can do initial because of development costs and minimum order quantities from the factory.
I hope you've enjoyed this video, please do hit that like button, it means a lot.
Remember to join that mailing list.
As always, thanks for watching. - Авто та транспорт
Brilliant work you've listened and delivered once again.. I'll start saving straight away. Roll on summer 24.
We try 🙏
Cannot wait for these to be available, my DSG T6 140 Euro 5 judders bad around right hand bends! Great work as usual guys! 🙌🏻
The DSGs seem to be the least likely to suffer with the judder. They will come in time but later on I'm afraid
Great video you mentioned that initial supply will be for selected vans. I have a T6.1 T28 110 I am having the Solow NSL fitted shortly do think my van will require the shorter drive shafts?
No, it's only lower vans. Solow LOW's sometimes on the T6.1 110bhp
Lowdown have fitted solow air on my t6.1 110. Have judder at a low setting, so cant wait for these
Where are you based? I have 1 sample set here still to try. I'd like to try it on a bagged van
@TransporterHQ chelmsford is essex but happy to travel to you if it helps
I have creaking drivers side wheel on full lock when turned could that be drive shaft problem? Thanks
Mine is low with subframe raise and get this badddd on left hand sweeps and coming off roundabouts. T5.1 on air 😭
Vans currently on the garage awaiting new drive shaft, when are the new drive shafts availabile? Would this work with the sub frame lift?
Take.......my...........Money. Looking forward to these, had seriously bad judder when I had solow coilovers, under power and left turns. On air with sub frame raise now, but still get a very slight rumble under power and doesnt feel like its got as much power on acceleration as it does when riding slightly higher, so id bet these will help with that too.
They will for sure
@@THQAutomotive How long we talking wait time on the first vans ? Mines the T6 102 so in the first batch :D
@@Adam_H_Official I don't want to give dates, but to be safe, say 6 months, although aiming for sooner.
Finally t6.1 mine judders like mad but only in the morning and on left turns
How low are you? 110bhp
How strange, im not super low but im literally having new driveshafts installed in a few weeks as its juddering in 3rd, 4th and 5th under any acceleration in a straight line.
Unfortunately wont have the van long enough to get these shafts.
But great solution for lowered Transporters.
bad timing then. I hope it sorts your issue.
Would these be a worthwile upgrade for 102 T6 5 speed running NSLs?
No, they're not needed unless your going lower than NSL height
Have not really had a problem in my t5 2.5 with so-low lows .. are they normally a problem..
2.5's seem worse on air.
@TransporterHQ only dropped it on out the box atm but I will keep an eye and grab some if needed.
Thanks for the reply
Will you also be making oem type driveshafts.
Hello, no we will just be doing the shortened version
Staying ahead of the game boys
Always trying 💪
Need these in my eu6 102
They seem to be the worst so first on the list
I’ve a T30 T6.1 110 can these shafts be pre ordered please?
Not yet but join our mailing list for updates.
How are these looking on time scale for 6.1 110? Are you having 110k made for pending orders😂
Like every product, it will be quality 👍👍👍👍👍👌👌👌👌👌🎶
We try our best 😊
My T5.1 2.0 140 eats shafts for fun….. it’s only slightly lowered on Solows 😬😂😂
We got your back!! Slightly lower you say...... 🤨😉😘
@@THQAutomotive 🖤🖤
Would it not of bean better to show before then after with the problem ? . Then with all the spill
How do you show before, it's not a visual thing.
With the state of British roads, why would you lower? I'd be raising mine to give clearance climbing out of the potholes!!!!! 😆
Because lowering on the right suspension massively improves ride, riding, sway and body roll.
Any vehicle looks better low haha
hopefully they are NOT manufactured by J&R Drive Shafts...
I can confirm they aren't.
___________________________________________________
?