I've had the chance to use this table a couple of times now. It's fun to whip out in front of people:) I can see what people are talking about when they say the legs are delicate, but they're design to support a "mostly" vertical load, not be torqued from the side or pushed back into place. If you just let the table open or close on it's own and don't force anything, it works great ua-cam.com/users/postUgkxyFZUPFEey-PuqsPMxqaykBhgA1LWxFHh Once it's set up, it's pretty solid. My only gripe would probably be related to the clamps provided. They're not the highest quality. They do the job, so no big deal, but they could be better. All in all, pretty cool gadget.
Witam i pozdrawiam!!Bardzo pomyslowe zrobienie i zlozenie stolu stolarskiego,duza wiedza, dokladnosc i precyzja,bardzo dobre wykonanie swiadczy o jego wykonawcy!!Prima!!Dobry material filmowy!!
isso é o que eu chamo de um trabalho feito com amor e perfeição! vejo nessa obra um toque do carpinteiro de Nazaré! que Ele te abençoe grandemente. um grande abraço!
Festool, probably the best dust extration tools on the planet.. :) just saying. Great video, I am inserting a Benchcrafted vise my self so this was helpfull. TR
Boa Noite, que maravilha de trabalho. Favor informar as marcas da Tupia e Furadeira de Bancada e Parafusadeira, pois quero ver se encontro aqui no Brasil. Obrigado.
Holas a todos mis colegas los que trabajamos en el rubro de la madera, (fabricación de mueble entre otros productos)solo quiero hacer publico mis felicitaciones al señor quien diseño a este bando de trabajo, ¡es un profesional!!! me gusta mucho está muy bonito su trabajo, me estoy haciendo uno muy aparecido y lo publicare gracias.
Great job! Shame you didn't have any English sub titles. It would have been nice to know what you would use it for by giving us some examples - The Hardware looked magnificent - I would like one purely for the hardware - whether I would ever use it is beside the point. Nice Job 'Freund' .... auf Wiedersehen .....Mike
Sr. Guido Henn, estoy viendo los vídeos y considero una obra de arte, mi intención, es hacer una similar pero no conozco las medidas y el material empleado, pregunto si posee libros o apuntes al respecto, que costo tendrían y si se los puede comprar y por que medio, desde ya muchas gracias, soy de Argentina y un admirador de su trabajo atte. Carlos.
+carlos hugo morillo Don Carlos en este enlace podrá encontrar la información deseada, espero le ayude. Saludos y mis respetos desde Puerto Rico. www.finewoodworking.com/authors/guido-henn.aspx
Great! But: I had to mute the audio, otherwise I would have smashed my laptop-display. This background 'happy-well-feeling' music is just nerve wrecking.
FreeSoftware I agree! That was worse than listening to Taylor Swift and Katie Perry. But watching those router scenes was riveting, so it was a must to listen to the router and the music.
Soy Julio César Lozano, de Perú. Me parece fabuloso lo que hace Sr. Guido y me gustaría tener información detallada, tanto de planos como de herramientas, indispensables para montar un taller. Muchas gracias anticipadas por la atención que brinde a la presente.
Seems like that should have been mounted a little deeper. Doesn't make sense to me why you'd want the bottom of the vise sticking out of the bottom of the bench vs. having it be flush.
It’s because of the thickness of the bench top. If the rails were mounted deeper, the threaded rod would need to be closer to the bench top, and the hand wheel would therefore sit partially above bench height, meaning it could be hit by hand planes etc.
+Stephan Frion Dear Stephan, I'm sending you to Guido Henn's link. Here you'll fine a lot of interesting information. I hope this help you as well as others. My respects from Puerto Rico. www.finewoodworking.com/tool-guide/Product-Finder/Drill-Presses/118172.aspx?channel=1
I am still confused why people post "Instructional Videos" and don't give any instruction to the audience. To me this is just showing off your skills and not really teaching much of anything. Sure, experienced woodworkers understand what you are doing but not the people who want to learn.
+yecid ballesteros rivera Don Yecid, le estoy colocando el enlace que le brindará la información deseada, espero esto le ayude. Saludos y mis respetos desde Puerto Rico. www.tauntonstore.com/roubo-bench-with-benchcrafted-vises-011278.html?source=WW001UPS
🤣🤣 I used to wonder the same thing! Eventually I started making stuff but never found the time to shoot or upload videos. Paying the bills required taking up dull jobs and finishing them as quickly as possible. Finally I stopped doing those jobs, now I have all the time in the world to make videos but again no work to do 😂😂😂 It's a very very tiny subsection of maker-youtubers who make money from videos, either ad-revenue, affiliate links or patreon supported. (Diresta & AvE to name two)
I think the vice was great and you did a nice job with the install but in my opinion I don't think showing every pass with the router was needed it was quite boring but I wanted to see the finished product if all your videos are like this I think I will pass on viewing
I read this comment...and I had no idea what you were talking about. Then about 5 minutes into the video I got it and laughed outloud...Now that is some funny shit!
🤣🤣 I learnt that this music can be a very powerful weapon to drive people nuts! Just imagine playing it over and over again in a dentist's lobby while waiting to get a root canal done!! 🤣🤣🤣 Learnt nothing useful from the video though.
There is no voice over with explanation in the video, so if you don't like the music, you can use the volume knob and - like magic - the music will disappear ;-) Guido
I've had the chance to use this table a couple of times now. It's fun to whip out in front of people:) I can see what people are talking about when they say the legs are delicate, but they're design to support a "mostly" vertical load, not be torqued from the side or pushed back into place. If you just let the table open or close on it's own and don't force anything, it works great ua-cam.com/users/postUgkxyFZUPFEey-PuqsPMxqaykBhgA1LWxFHh Once it's set up, it's pretty solid. My only gripe would probably be related to the clamps provided. They're not the highest quality. They do the job, so no big deal, but they could be better. All in all, pretty cool gadget.
Witam i pozdrawiam!!Bardzo pomyslowe zrobienie i zlozenie stolu stolarskiego,duza wiedza, dokladnosc i precyzja,bardzo dobre wykonanie swiadczy o jego wykonawcy!!Prima!!Dobry material filmowy!!
Tief geschätzt, Herrn Guido Henn. Grüße aus Puerto Rico.
isso é o que eu chamo de um trabalho feito com amor e perfeição! vejo nessa obra um toque do carpinteiro de Nazaré! que Ele te abençoe grandemente. um grande abraço!
Superbe réalisation Exemplaire Bravo
Thread cutting in wood, plastic or aluminum gives me shivers. Except from that, it looks like a sturdy workbench.
This is what happens when a master machinist meets woodworking, ausgezeichnet!!
The Festool Router is the star of the show. Great tool.
Porque quitaste los demas videos heran como 6, saludos cordiales desde QUITO-ECUADOR
Festool, probably the best dust extration tools on the planet.. :) just saying. Great video, I am inserting a Benchcrafted vise my self so this was helpfull.
TR
dа уж лидер, так все проебал красиво!!!
Boa Noite, que maravilha de trabalho. Favor informar as marcas da Tupia e Furadeira de Bancada e Parafusadeira, pois quero ver se encontro aqui no Brasil. Obrigado.
10:30 Outstanding dust collection!
Holas a todos mis colegas los que trabajamos en el rubro de la madera, (fabricación de mueble entre otros productos)solo quiero hacer publico mis felicitaciones al señor quien diseño a este bando de trabajo, ¡es un profesional!!! me gusta mucho está muy bonito su trabajo, me estoy haciendo uno muy aparecido y lo publicare gracias.
To all the thumbs down peeps, finish work,precision work takes patience so sthu thank you
Great job! Shame you didn't have any English sub titles. It would have been nice to know what you would use it for by giving us some examples - The Hardware looked magnificent - I would like one purely for the hardware - whether I would ever use it is beside the point. Nice Job 'Freund' .... auf Wiedersehen .....Mike
Why does the hardware not mount flush on the table bottom?
Just because you either lose that vertical extra 1/2 inch or the benchtop is too "thin"... if the bench is fatter, then you mount it flush
Sr. Guido Henn, estoy viendo los vídeos y considero una obra de arte, mi intención, es hacer una similar pero no conozco las medidas y el material empleado, pregunto si posee libros o apuntes al respecto, que costo tendrían y si se los puede comprar y por que medio, desde ya muchas gracias, soy de Argentina y un admirador de su trabajo atte. Carlos.
+carlos hugo morillo
Don Carlos en este enlace podrá encontrar la información deseada, espero le ayude. Saludos y mis respetos desde Puerto Rico.
www.finewoodworking.com/authors/guido-henn.aspx
Es un verdadero artista de la madera yo me quedo pegado en sus videos
Great! But: I had to mute the audio, otherwise I would have smashed my laptop-display. This background 'happy-well-feeling' music is just nerve wrecking.
FreeSoftware excelente,se pueden obtener planos?
FreeSoftware I agree! That was worse than listening to Taylor Swift and Katie Perry.
But watching those router scenes was riveting, so it was a must to listen
to the router and the music.
It's called "GEMA freie Musik"
Extremamente interessante e preciso... As ferramentas são de dar "água na boca", e as plantas com as medidas devem ter sido um trabalho de engenheiro.
Dónde puedo comprar los volantes??
Soy Julio César Lozano, de Perú. Me parece fabuloso lo que hace Sr. Guido y me gustaría tener información detallada, tanto de planos como de herramientas, indispensables para montar un taller. Muchas gracias anticipadas por la atención que brinde a la presente.
Mein Kollege, wo Sie einen Router diese kaufen? In Brasilien ist es nicht vorhanden ist, diese Anleitung ist sehr hilfreich. Herzliche Glückwünsche.
Seems like that should have been mounted a little deeper. Doesn't make sense to me why you'd want the bottom of the vise sticking out of the bottom of the bench vs. having it be flush.
It’s because of the thickness of the bench top. If the rails were mounted deeper, the threaded rod would need to be closer to the bench top, and the hand wheel would therefore sit partially above bench height, meaning it could be hit by hand planes etc.
interesting drill press attachment for hand drill ....
+Stephan Frion
Dear Stephan, I'm sending you to Guido Henn's link. Here you'll fine a lot of interesting information. I hope this help you as well as others. My respects from Puerto Rico.
www.finewoodworking.com/tool-guide/Product-Finder/Drill-Presses/118172.aspx?channel=1
is there a new link? This one doesnt lead to anything in particular. thanks!
Search for wabeco on google and you will find the drillstand
sempre deve-se esperar a fresa parar totalmente para aproximar as mãos. é só uma observaçao.
I am still confused why people post "Instructional Videos" and don't give any instruction to the audience. To me this is just showing off your skills and not really teaching much of anything. Sure, experienced woodworkers understand what you are doing but not the people who want to learn.
Excelente y perfecto
De que medida es ese husillo del 15:03 ??
bom dia! onde encontro a continuação da banca ?
Just in case you wonder: Fine Tools (Feine Werkzeuge) does not sell dust collection, that's why.
Como se llama la máquina para hacer los agujeros?
all that and we dont get a money shit at the end :(. Inwanred to see the bench uprigtht and in use!
wie sie genannt wird, dass Maschine, um Löcher zu machen?
Mauro Cobain nicht, wenn es ist gut geschrieben, ich bin Argentinier und ich bin mit Google Translator.
cuanto valen los planos en PDF.
the problem is you must have $40000 tools to make a table.
como hago para las medidas de todas las piezas gracias
+yecid ballesteros rivera
Don Yecid, le estoy colocando el enlace que le brindará la información deseada, espero esto le ayude. Saludos y mis respetos desde Puerto Rico.
www.tauntonstore.com/roubo-bench-with-benchcrafted-vises-011278.html?source=WW001UPS
every video maker has over $20,000 tools and makes a table. where do these people get so much money for tools? does making videos make so much money?
🤣🤣
I used to wonder the same thing! Eventually I started making stuff but never found the time to shoot or upload videos. Paying the bills required taking up dull jobs and finishing them as quickly as possible. Finally I stopped doing those jobs, now I have all the time in the world to make videos but again no work to do 😂😂😂
It's a very very tiny subsection of maker-youtubers who make money from videos, either ad-revenue, affiliate links or patreon supported.
(Diresta & AvE to name two)
🤩🤩🤩👍👍👍✌
16:26 minutes I can never get back
Sweet jazz
je peu l' avoir en français merci
I think the vice was great and you did a nice job with the install but in my opinion I don't think showing every pass with the router was needed it was quite boring but I wanted to see the finished product if all your videos are like this I think I will pass on viewing
% there's a hole in my bucket, dear Liza, a hole %
I read this comment...and I had no idea what you were talking about. Then about 5 minutes into the video I got it and laughed outloud...Now that is some funny shit!
Joseph Watson Haha, I got to 11:36 befre the penny dropped! nice one.
+Gord Slater Part of me wants to hate you for this, but for the most part, I'm thankful. It helped me get through the video.
Yes. I laughed so hard it hurt.
Is it just me, or does anyone else feel they need to blow their life savings on festool tools?
Haha, word.
Yes but - has anyone learnt anything??
🤣🤣
I learnt that this music can be a very powerful weapon to drive people nuts!
Just imagine playing it over and over again in a dentist's lobby while waiting to get a root canal done!! 🤣🤣🤣
Learnt nothing useful from the video though.
So you spend lots of money on woodworking tool (maybe it is a commercial) and spend many hours to make a crank handle spinner, sooooo smart !!!!!
Don’t need the music. Especially this elevator music. How about “Down in Hollywood” by Rye Cooder.!8
That's an awful lot of power tools to make a HAND TOOL bench!!!
and it includes the worst part about power tools, the noise.
מה. עם. תרגום. בעברית
show
You mean slow?
Stuck that norsiating music for 7 minutes no more bye
Unglaublich lag! Musik geht gar nicht! Viele gleiche Durchgänge, die man einfach sparen könnte.
vorzüglich
Priemery cu riurok
Please- Get rid of that pornomusic !
There is no voice over with explanation in the video, so if you don't like the music, you can use the volume knob and - like magic - the music will disappear ;-)
Guido
I actually enjoyed the music.
Meiner Güte ist das langatmig...